Improved reception in the backend and replaced thread
with periodic timer as thread was used only to
periodically poll RTT data availability and using timer
is more RAM-wise efficient.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Allow logging subsystem to send the logging messages to outside
system. This backend implements RFC 5424 (syslog protocol) and
RFC 5426 (syslog over UDP).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add symbol which contains the number of bytes contained
in the image.
Using '_image_rom_end' will not work, as there are
symbols loaded after its value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
Extended backend interface to allow notifying backend
that log messages has been dropped due to insufficient
internal buffer size. Notification contains number of
log messages dropped since last notification. It
is optional for a backend to implement handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
DEVICE_AND_API_INIT() is preferred over DEVICE_INIT() since
DEVICE_INIT() does not set the API struct at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A couple references to the old PRIMARY and SECONDARY levels were left in
place when everything moved to the new levels.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a "nocache" read-write memory section that is configured to
not be cached. This memory section can be used to perform DMA
transfers when cache coherence issues are not optimal or can not
be solved using cache maintenance operations.
This is currently only supported on ARM Cortex M7 with MPU.
Fixes#2927
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Like ARP, GPTP works on top of Ethernet but is considered as a layer 2
protocol, so we cannot set an AF_* family type. Instead let's have a bit
telling that current packet is a gptp message (family has to be
AF_UNSPEC).
The bit is unionized with a TCP related bit: TCP cannot be present on an
AF_UNSPEC packet so there will not be any collision.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current code generating Ethernet header is scattered all over the place,
sometimes in functions that are supposed to check something (and not
filling the header). Not to say about innefficiency.
Src ll address does not need to be set in L2 as net_if.c handles that
already.
Broadcast dst ll address is the same in ipv4 or ipv6, thus factorizing.
In each case, multicast is filled in only at the relevant place.
This is the first step towards changing L2 sending logic, when L2 send
API function will be the only point of sending. The redirection from
driver to L2 again (which finally uses the right device API function to
send) it a temporary hack.
This simplifies the code but will also enable using statically
allocated net_buf and ethernet header payload buffer afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently unoptimized, as all frags are allocated with relevant
ll reserve for such header space. However, this is the first step
towards getting rid of that ll reserve concept everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change adds CPU stats module for tracing hooks. Module provides
information about percent of CPU usage based on tracing hooks
for threads switching in and out, interrupts enters and exits.
cpu_stats only distinguishes between idle thread, non idle
thread and scheduler.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Helper macro, MPU_ALIGN() is used by script
gen_app_partitions.py, so the macro needs to be available,
if the APP Shared memory feature is to be used. This commit
defines MPU_ALIGN() in the ARC linker.ld script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch proceeds with the separation of older serial console
subsystem into device-independent console subsytem and buffered
serial device ("tty") API.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The macro RB_FOR_EACH_CONTAINER has a loop where the condition to stop
is whether the node is null or not. Explicitly checking it.
MISRA-C rule 14.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The builtin_*_overflow functions when available return a
boolean. Change internal definitions to return same type.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit moves the app_data_alignment.ld scripts
under arch/arc sub-directory, as it is not not used
at all in ARM builds. The script is still used for
ARC, whose v2 MPU also has the reuquirement for
power-of-two size alignment.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the definition of _image_ram_start at the beginning
of the RAMMABLE (SRAM) region, so it points to the actual
start of RAM linker sections.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit standardizes and simplifies the way we enforce
linker section alignment, to comply with minimum alignment
requirement for MPU, if we build Zephyr with MPU support:
- it enforces alignment with the minimum MPU granularity at
the beginning and end of linker sections that require to
be protected by MPU,
- it enforces alignment with size if required by the MPU
architecture.
Particularly for the Application Memory section, the commit
simplifies how the proper alignment is enforced, removing
the need of calculating the alignment with a post-linker
python script. It also removes the need for an additional
section for padding.
For the Application Shared Memory section(s), the commit
enforces minimum alignment besides the requirement for
alignment with size (for the respective MPUs) and fixes
a bug where the app_data_align was erronously used in the
scipts for auto-generating the linker scripts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The commit enforces the use of ARM_MPU_REGION_MIN_ALIGN_AND_SIZE
in include/arch/arm/arch.h, instead of using 32 as a hard-coded
value. The symbol is also used in arm/thread.c to truncate the
thread stack size to satisfy MPU granularity. The commit does
not introduce behavioral changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
poll_out function was returning the character that was sent. It
happens that it is always constant and the return of this functions is
never tested. Changing it to be a void function.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This allows for workqueues to be started in user mode.
No additional kernel objects or system calls are defined
other than starting the workqueue in user mode; for
permission purposes the embedded queue and thread objects
are sufficient.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's no current need for this and it makes work items
declared with K_WORK_DEFINE() inaccessible to user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_work and k_work_q are not kernel objects, nor will they
be. k_work_q contains some kernel objects which are tracked
independently.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In case terminal sends `\r\n` on the Enter button
shell will go to the new line twice and it will print
prompt twice. This patch fixes it.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
In conn.h the comments on src/dst in bt_conn_le_info and
bt_conn_br_info does not clearly state the point of view.
src could both be perceived as the connections point of view
(src = local address) or the call-back where the structs are
used point of view (src = remote address).
The comments about src/dst has been made more clear.
Signed-off-by: Theis Blickfeldt <ttjo@oticon.com>
There is not an easy way to relate an application's user_data to a
connection. One way is to save a pointer to bt_conn in the
application's user_data array upon connection establishment.
Each connection related callback function will have to loop for all
user_data and compare the saved pointer to the passed bt_conn
pointer. This is inefficient if there are many callback activations
during the connection.
This change makes the internal bt_conn mapping function accessible to
applications in conn.h. The function name is changed to
bt_conn_index() to clearly indicate that the function returns an
index of an array.
Add an ASSERT to catch illegal parameter.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
As C++ does not support designated initializers, including this file
in a c++ file caused a compilation error.
gcc allows them if they are ordered as the members appear in the
struct definition
I tested it with an application using mqtt and ethernet.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
This commit fixes a bug in the ARMv7-M convenience macro that
evaluates write-ability of given access permissions attributes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Shell log backend was using k_fifo to enqueue log messages.
It was using field in log message that was used for same
purpose in log_core before passing message to backends.
However, this method supported only single shell as
other shell was corruption the fifo because field was
reused.
Modified shell log backend to use k_msgq for pending
messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Currently shell UART backend is interrupt driven if UART driver
is interrupt driven. That can be limitation if one instance
wants to use interrupts but shell UART should not.
Added option to shell uart to be able to control use of
interrupts. By default interrupts are enabled if driver
supports it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Secure socket options descriptions were not doxygen comments,
therefore did not show up in the documentation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
