Change type of advertising set handle to 8 bit to comply with
Bluetooth Core spec. type.
Fixes wrong usage of adv. set handle variable in function
bt_le_per_adv_set_param.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove irq_lock around connection lookup, this is no longer needed
now that the lookup functions always have a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make the connection lookup functions thread-safe by re-using the
bt_conn_ref returning NULL mechanism and keeping a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make bt_conn_ref return NULL if the reference count has reached zero.
This makes it possible to re-use bt_conn_ref internally to re-use the
reference count mechanism to check if the reference is in use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix missing initialization of periodic interval value in
advertising report info structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clarify that the acl_data struct includes the bt_buf type as the
first variable in the user data struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out implementation of functions defined in buf.h to its own
source file buf.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Periodic Advertising Set Info Transfer depends on Extended
Advertising and connections hence enclose the LE Periodic
Advertising Set Info Sync Transfer implementation inside
CONFIG_BT_PER_ADV and CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Periodic Advertising Sync Transfer depends on connections
hence enclose the LE Periodic Advertising Sync Transfer
Received Event code inside CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the debug key-set comparison for debug keys comparing the
generated key in big-endian format against the debug private
key in little-endian format.
Fix this by converting the private key to big-endian format for
convenience.
Use the _be suffix for all variables to make the mixing of the
endian formats easier to read.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds support for using the periodic advertiser list.
This list allows the application to rely on specific
devices when creating periodic advertising syncs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the advertising option that controls if the directed advertiser
will use an RPA or the identity address of the peer for the initiator
address.
This option currently has two issues:
- It behaves differently if the privacy feature has been enabled,
which can be confusing for application to use.
- It cannot start a directed advertiser towards a peer that is not
privacy-enabled and has distributed an IRK.
This commit includes the following changes:
- When privacy has been enabled in order to advertise towards a
privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now
be set (same as when privacy has been disabled).
- It is now possible to start a directed advertiser using the identity
address of the peer when privacy-enabled.
- When privacy has been enabled the advertising option combination
of using the local identity address and an RPA as the initiator
address is now disallowed and will return an error code.
This is done because this combination did not actually work and would
have used the identity address of the peer instead.
- If the controller does not support controller-based privacy then
using the option BT_LE_ADV_OPT_DIR_ADDR_RPA will return ENOTSUP
because this behavior cannot be done with host-based privacy.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If chan->conn is already NULL do not call bt_conn_unref as that will
likely cause a crash, also this make sure that if channel has been
disconnected using bt_iso_chan_disconnect it removes the channel from
connection list before setting the chan->conn to NULL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document and validate advertising parameters for the disallowed
advertising mode high duty cycle directed connectable advertising
using extended advertising PDUs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue where the encrypt change has an error code, but the
encrypt change request was unrelated to the current ATT request.
This lead to the current ATT transaction being interpreted as finished
an the ATT client would proceed with the next ATT request, which would
fail since the ATT client is now violating the ATT single transaction
rule.
Updated similar if statement checking for the opposite to improve
readability.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix application conn param update submitted before the timeout of
CONFIG_BT_CONN_PARAM_UPDATE has expired being ignored when
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS=n.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename the update_work handler to deferred_work since this handler
is being multiplexed for different kinds of deferred work, not just
updating the connection parameters.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move auto-initiation of the peripheral connection parameter update,
this handling would only submit the delayed work with the timeout once
all other auto initiated procedures had completed. This behavior means
that the delay would not be set on when the connection was established
but instead relative to the previous procedures.
Based on the connection interval used, the instant(s) used, and the
number of auto procedures this delay becomes indeterminate.
Submit the work once connected, the constraint that existed in the
zephyr link layer earlier about requesting only one control procedure
at a time has been removed.
This also brings all the handling of the timeout work to the connection
state handling, which makes it easier to track this behavior in code.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document the behavior of the bt_conn_le_conn_update API when the
local device is the peripheral role.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Introduce a support kconfig for controller ECDH command support.
Default to host ECDH emulation in combined host controller build
where the controller does not support these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This prevents any work to be submitted until the stack is initialized
thus avoiding pointless hash generation, etc, while initializing the
system.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds support for enabling/disabling PA sync receive,
which allows applications to control when to receive data
while a sync is established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an ACL connection is disconnected while there is an ISO connection
associated with it the ACL connection will not be cleanup properly as
the code attempt to cleanup the ISO connection and breaks without
proceeding to cleanup the ACL as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The callbacks has been moved from being local to each
bt_le_per_adv_sync object, to being global. The
removal of the pointer in bt_le_per_adv_sync was
missing from that update.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit makes sure the string generated by bt_uuid_to_str is correct
if the architecture is big-endian.
Signed-off-by: François Delawarde <fnde@demant.com>
Remove the range on the setting the bluetooth BT_RX_STACK_SIZE.
This range prevents setting the RX stack size lower than 1024,
which depending on the application is too high.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Be consistent in the permission handling of the discovered attribute
in the temporary object given in the discovery callback.
For characteristics the permission field was set to READ, while for
all other attributes it was set to 0.
Fixes: #29083
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update check in the bt_gatt_attr_value_handle API function to use the
UUID of the function, in case the attribute has been declared with a
different read handler, or the attribute is a temporary object
where the read attribute has not been set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor use of 16-bit common GATT UUID types where a complete UUID
object is declared on the stack only to use the 16-bit value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reduce the size of the disconnect pool required the full MTU
for a disconnect request.
Also completely remove the pool when not needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't use the ATT structs that has contains only a flexible array
member. This is not supported by C99 standard, only through GNU C
extension with zero length array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
