Corrected typos and added headings to API section to
enhance readability.
Change-Id: I5a43edfdd6a8ac7735d8f00823058f6a2661439f
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Corrected a few typos and misspellings. Corrected grammar to add clarity to the
section on task groups. Added cleaner headings to APIs to enhance readability.
Change-Id: I6ff4d447775db67dc7008aa30bd2bbb4ab6c32de
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
The path to the sample applications is a mis-match of previous and the
current values. Correcting it to represent the new value.
Change-Id: I54ffe823335b95f1076b1346d149b359b4f2e7bd
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently we have several sections that require the use of sudo for
functionality, but that is a workaround to the need for libusb to
control the FlySwatter hardware. This can be solved by adding in
proper udev rules.
Change-Id: I03f6464cb96a9924c902b897c36df925eb07d058
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The info already exists elsewhere in the documentation / GSG.
Change-Id: I1176b496dfd28179ce7771af4d3ac659690c7a7e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
This file was updated and included in the nanokernel
primer information. It showcases the simple use of
nanokernel semaphores, timers and fibers.
Change-Id: Iaaa961eccf4f0df5d4c009d053b9d28e96c8d87d
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Now that we've gone open source, there no longer needs to be a user id.
Change-Id: Ib3bc8ca1591d23e89a7d9d33946d56438c4f9846
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current documentation seems to gloss over the fact that powering on
the device before any JTAG operation is necessary.
Change-Id: Id7a46b611ddba97fa72e0a3a33ddc189b1e4a7c4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Pins start at 1, not 0. Including JTAG pins.
Change-Id: I2e058c114bd1a4da25d4964e418a942d3c41b08c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The wget command is broken in the documentation. By using a \
to continue the command on another line, unfortunately line does not
render a newline character after it. As such, a copy and paste
fails miserably. Removing the \ allows a copy and paste operation.
Change-Id: I95c09dbe2dbcd51dedefcedc285e6ed38419960f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Fix incorrect path for ssh key. It is .ssh, not .id.
Change-Id: I84f054f9ba880e31fcc89cf10da0fb8522dfbae0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The file can be used to define variables used by the SDK to avoid
having to define them everytime a session is started.
The old file names ~/zephyr-env_install.bash will still work but
it will warn about the file being renamed. We do not want to break
users who have ~/zephyr-env_install.bash in their home and depend on
it.
Change-Id: I04fcaa76854bda3dcfc1cabe75e00e95c511b10d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Table updated with examples column to eliminate Latin prefixes (e.g.) and
to enhance readability.
W/S fixed
Change-Id: Ia92e2d5454e816595e054cb44caa56364f9dc1b3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Breaking out the documentation on setting up a Linux Foundation account to
it's own section. This isn't needed for the getting started process, and is
only needed if someone decides to start contributing code.
Change-Id: I112b65a53b167927d2617aef7364c13f30f74c33
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current doc structure requires the creation of a Linux Foundation
account, which is not really a valid open source usage model. In fact,
it isn't even required to download anything as anonymous git clone works.
Content on creating a Linux Foundation ID will be moved to the
collaboration section in another commit.
Change-Id: I50253d7b3da85b64986d62f2e5bee25da3eb3987
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds Implementation Conformance Statement (ICS) for L2CAP layer
with currently supported features.
Change-Id: Ie15d2936877edb674e20283b12a50487df5cdc02
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Align code examples and other parts of the document.
Change-Id: I1f6eb9d5d22991f54e367ed248abfe0d49622cc5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The build steps as they are written imply that you will always need to
source the zephyr-env.sh file before flashing. This is not the case.
Change-Id: I2cffd5ee4b190dee8304f1843727926c7467f5ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Correcting the steps for running the loading of the ROM image.
Change-Id: Icdcfe1c5ffb28ba09b5d12ba0cf39ac25d3d166f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file event_logger.h
Includes the event logger information in the ReST documentation.
Modifies doxygen.config to include the event logger.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I88b8672a527138e2b4f7df4b4b0495a0d871cad3
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Includes the I/O drivers' interfaces in the ReST documentation.
Change-Id: I9ef70c4b0561c102b5c9425b4e41b5c813bf51b6
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Remove table which had redundant information and created a simple TOC
with boards. This will allow easy expansion of the list over time.
Change-Id: Ic94063cc99ddcb3d2140a4beef1067a9766d60a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many of the UART interface functions are hidden behind ifdefs,
set those to 'y' when building documentation.
Change-Id: I1371e64b6fe4c269ce41c2c54e0f013d8088dbcf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates Set Up steps from previous 01.org Gerrit to new Linux Foundation one.
Change-Id: Iab98864b405ff6dc4ea20d687fae77bd59284678
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
... and adds a note about terminal and flashing.
Change-Id: I9b3fe9a8e9993ee68612d177aa4163fcf15e912d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates Set Up steps from previous 01.org Gerrit to new Linux Foundation one.
Change-Id: Iab98864b405ff6dc4ea20d687fae77bd59284678
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Updated all the links and references for gerrit to the new gerrit
in LF. Also updated the screenshots to show the new gerrit and
project name.
Change-Id: If56b230379fad4de58032f9d729e6a94f27389ed
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Search engines recommend having only one heading on level 1.
Modified the headings in the documentation index file to
follow the recommendation and help ensure that search engines
place Zephyr higher on their results lists.
Change-Id: I5590138f88721d1f2cdcbb49ad2aaad1d2dcd466
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updates files that were previously referencing the no longer in use
01.org infrastructure, now it we refer Linux Foundation name and have
updated links.
Change-Id: I9d03d7c23f855390f74219dbf1617fde1d58b33b
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Removed a repeated heading and set the ther headings
with the correct level.
Change-Id: Ief8b2f9a7f88d0b6c2456d6ae448e86bb0b8d050
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changed the link to the ReST documentation to a external link for reusability.
Change-Id: Ia575717c0fb92672828bb11854c9a8a1268af464
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removes the Sphinx specific ReST Markup from th README.rst file.
This allows basic ReST converters to render the README without
markup showing raw.
Change-Id: I9f31afb953802119939d177524c0d283414c3a48
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding documentation on best practices for a commit message.
Change-Id: I354fc13f641bc93c8fd82aca6310d488ffc30f24
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
gerrit_practices.rst has style and formatting issues. Bringing them back
in line with the recommended practices of the project.
Change-Id: If76406e046ab376cea3e14c0e490e38587b34e6d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Supported platforms section (platforms.rst) renamed to "boards.rst"
and broke into two tables instead of one (x86 arch and ARM arch).
Developer feedback was that navigating for board config options
by board architectures should be made easier.
Also updated index w/TOC to make supported board details
easier to find.
Change-Id: Ic014a720fd33ee685bde5809dc5b9e0622f5e989
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Fixing the flash script so that we only have one for the process of writing
out the ROM and the OS images.
Change-Id: I6fc8bd8eee553a17c0036da3ce5b89510f3b57d8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adding in an image for locating the JTAG connector on the Arduino 101 board,
and a visual pointer towards the JTAG silkscreen dot.
Added figures for the JTAG connector.
Change-Id: I57ed5608bf2f3ded325965ec77142e3376f386ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding in a section for attaching a serial cable, and links for two that we
have found that work for us. Adding in links to both serial cables.
Added figures of the pins with appropriate callouts.
Change-Id: Ibae64811f1c32f6a8e82be17abbc91df6c53219a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Fixing a few notes that are not being properly displayed.
Change-Id: I60f8a8615ee93ba391a99a819aa1761e6713e51b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Restructured the API documentation and moved it from the Reference
section to the Developer guides section.
Added a note about the search function to help users find the API they
are looking for faster.
Splitted the API docs into two files one for nanokernel and another for
the microkernel APIs.
Added table of contents for each of the API sections with a back link on
the headings to take the users back to the top of the page. Making
navigation easier and more user friendly.
Change-Id: I80f415a60ea9c7df22276b464013e906e1efa511
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Edits based upon the first version of feedback from the User Trial
sessions.
Change-Id: Ie339eaebab4a43a822e419cf988d9b9893faa922
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Restructured the guide to follow a basic three step process: Set up, develop,
build. All information that is independent of the OS selection was taken out of
of the OS related documents and placed in the general set up sections.
A new section, Developing Zephyr Applications, was added with links to all the
development relevant section of the documentation.
The content in local_development.rst was split between the setting_up.rst,
installation_linux.rst and installation_mac.rst files as appropriate.
This new structure provides a much better flow for developers beginning their
Zephyr develpment.
Applied all of Inaky's suggestions in the refactored content.
Minor markup fixes and language edits were also perfomed during the refactoring.
Fixed a cross-reference that was broken during the refactor.
Applied all the feedback from the first trial run.
Applied the feedback provided by David Kinder from TCS.
Change-Id: I3368a3a41ec9ad02cc4e7b37fe71c65abd8a7df9
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename them to DEVICE_NAME_GET and DEVICE_GET to fit in the 'device'
namespace.
Change-Id: I407a7f284ed4d1c071961b46615eea859c2e825f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the name of the firmware in the board documentation.
Proper name is "Firmware FRDM K64F" based on their website doc.
Change-Id: I75be2a676a9f2dcb4806ffbb39483c1ad91dae76
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Rename them to device_sync_ to fit in the device_ namespace.
Change-Id: I1088dda958584ed90b97137298050fee44c20ee4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds documentation for the Arduino 101 on how to
connect up the debugger, flash, and build for the platform.
Change-Id: I0c7f119eb892ad5857de73dca94bc284bd0b4279
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Updating the SDK version to 0.7.1 and the download link for it.
Change-Id: I63c4d57fdc96f60426af8610c7f9ac69e79fe69c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This option misunderstands how XIP works. The IDT is ALWAYS in ROM,
the question is whether crt0 will copy it into RAM or not. You can't
save ROM space in this way.
Change-Id: I58025e3d71ead35730d0a5026213299b4fcb5eb9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch updates SM PICS to PTS 6.4 version.
Change-Id: I6944698ea4f91d94f69a6968a123e30b106f8164
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GATT PICS to PTS 6.4 version.
Change-Id: I9e1416c1295c273a55a715c7207791e69b36919b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GAP PICS to PTS 6.4 version.
Change-Id: I3a132ffbb1db0da1b0b882a24ef4adbf2b1a77cf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I4f8686aeb00ac95d80159d959547cc1fdac072af
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed the README.rst to reflect the updates done on the API
documentation.
Change-Id: I591ddb7e618afedf9fd77eb322255aa1ee94c5a0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the terminology in the documentation and use board instead
of platform where applicable.
Change-Id: I812598e1948ee7df8739e5cc9029278e9e849c7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: Ib87d9432087225612b01d849eced6ad5c2064f0b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I1eb62d500fb8b1bb9ec9162f9b0196858fe22b0a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Completely overhauls Kernel Primer section on mailboxes to fill in
a host of omissions, correct errors, and improve readability.
Change-Id: I7f27230f59a593f6b7f44f399363ba423156b43e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce the device_sync_call_t object type and its API.
This object type allows one thread to perform synchronous calls into a
driver. Only one thread can do such calls per instance of the
device_sync_call_t object since it makes a global record of what type of
thread is waiting on it.
Based on an idea from Dmitriy Korovkin and Peter Mitsis, moving their
proposal to a more generic API provides the solution for all device
drivers that exposes synchronous API in an interrupt based
implementation.
Change-Id: I793fac76645396bf4eb6be38b5a130ac6bde8f73
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The calls have been renamed and some drivers and documentation
are still using the old function name.
Change-Id: Ib7505fca6aadd68e3ea3a22bb445914c3eb6ed7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following deprecated routines:
nano_cycle_get_32()
task_cycle_get_32()
fiber_cycle_get_32()
isr_cycle_get_32()
Those routines have all been replaced by sys_cycle_get_32().
Change-Id: I8709952633bb87c8963e88caffe1036fb9add527
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces calls to nano_cycle_get_32() and task_cycle_get_32()
with sys_cycle_get_32() as that is the preferred API to use.
Change-Id: I0ad1c50083c4cfdd9a26c2f20ba24e065410d90d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the 'genrest' documentation tool to fix the following types of
warnings and errors:
WARNING: Field list ends without a blank line; unexpected unindent.
WARNING: Block quote ends without a blank line; unexpected unindent.
ERROR: Unknown target name: "<insert kconfig option here>"
Change-Id: I926afcab24a3032923b470dd31ac6ae11d0fc689
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following context based APIs:
isr_tick_get_()
isr_tick_get_32()
fiber_tick_get()
fiber_tick_get_32()
The routines sys_tick_get() and sys_tick_get_32() are to be used instead.
Change-Id: I3fa1338f174b10e783bfb00941edadfff16eeaba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardizes appearance, corrects errors, improves readability,
and fils in gaps. Also relocates documentation for internal APIs.
Removes mention of non-existent task_sem_group_take() API from
the Kernel Primer document. The microkernel's semaphore group logic
currently allows a task to take a semaphore from a semaphore group
in a blocking manner.
Change-Id: Ib41a43775a97483a5adc552b70575ae4269aba35
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This routine allows the background task to sleep for a specified
number of ticks.
Change-Id: I2533005e3d9a564c2ca0de8333e224743cefb658
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic stack routines:
nano_stack_push()
nano_stack_stack_pop()
nano_stack_pop_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I6e7bb2ca69bb2e3d5ed955654390746e76e4ab92
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic semaphore routines:
nano_sem_take()
nano_sem_take_wait()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I09d715d07263eb0ee526231120ba65d1e3feebce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the following generic lifo routines:
nano_lifo_put()
nano_lifo_get()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Those routines are convenience wrappers for invoking the task, fiber and
ISR (if applicable) specific implementations.
Change-Id: I5252e4643fe4772f1309b26c1b3e4319f5035956
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When generating documentation for kconfig options, support
wildcards to be able to parse all relevant files.
Change-Id: Ifa565e3809996fcd13b0f15d61a4ffb108c1aa0a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update semaphore documentation to remove mention of command
packet sets, which no longer exist.
Change-Id: I19303f7f497b7d8299723d01c91ae4f4513162f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add the tags required by doxygen for defining the group of the
kernel event logger.
Change-Id: I96ec6b6604da5a541ce8041e6fa3c324a03ff698
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This reflects the changes made in commit df6be15aa5...
Change-Id: Ibe1bc167390268c0e335a0b4060a600ef55d1add
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the Auto-generated text from the main heading. Changes the headings
to the consistent hierarchy used elsewhere in the documentation.
Change-Id: I146e4d7ac280b4a3bb81fc3263f826637a8bf08f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixed typo in system_fundamentals. Acronyms FIFO and LIFO
defined with capital letters in kernel_fundamentals. Added bold
to paragraph lists to enhance readability in application_fundamentals
Added lots of :dfn: syntax for better interlinking to API.
Corrected whitespace for sub-bullet directive.
Change-Id: If6c5bc78746686d1a4986974f1b56bf9b2caebca
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add missing package "glibc-devel.i686" required to build project in fedora.
Change-Id: I1baf9a72b1ca2dbdd3aa65936875b43479779ed1
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The edit includes: correcting a previous rebase,
adding bullets for clarity, and other grammar fixes.
Change-Id: I9a6ac616b2eca5f2bab9728ebd8b7e50d3effbe1
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Removes permalinks and sets the correct version and release. The change places
the copyright notice and license in the footer of every page.
Both copyright and license do not appear in the website's version.
Change-Id: Idb5171b24af004fc2f7aff42aab43469f26305b4
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not support xtools, although it can be used, it should not
be documented as an alternative.
Change-Id: I7be753393e4976b8c9610bdb33f1018dfef5eb95
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To make the documentation readable from the source I want to get rid of the
substitutions for the project name an code name. This does not add any values
and makes it unreadable when looking at the text files directly. It also causes
some issues when people use those without actually knowing what they represent,
resulting in some weird and redundant language.
Change-Id: Icc70eef90966ed19531c3406fe7a6d1866f7d81d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To make the documentation readable from the source I want to get rid of the
substitutions for the project name an code name. This does not add any values
and makes it unreadable when looking at the text files directly. It also causes
some issues when people use those without actually knowing what they represent,
resulting in some weird and redundant language.
Change-Id: I09e8cbbee7c1141a7a77d3ffff59cdae2b52050c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
'About' alone conflicts with the website menu called about and is
none descriptive.
Change-Id: Ib112baded87b2a3175ba22d0efaddfcb46a18c8c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the kernel event logger documentation where the user can find
how to use this mechanism and which event logging points are
available currently.
Change-Id: I6d86c7b79c6b4a56a9e3514b6c4933a35e0c782f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
A new note explains the correct ReST markup for links to the functions
in the API documentation extracted by Doxygen.
Change-Id: Ifd61794445bc559485dd4034ae68897271837939
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adds the information regarding the application's directory structure
expected by the kernel and the build system. It includes how to create
a Makefile for the application's directory.
Change-Id: I4911bd86205831d7cdf1dea6095a9090ba9122b9
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changes the labels to be consistent with the rest of the documentation.
Fixed other minor markup and language issues.
Adds the missing figures for apps_kernel_conf.rst
Change-Id: I34a7650c04bb2d1f525eaad4efa7395f8272c88f
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Update pre-commit checkpatch script to use project .checkpatch.conf
file.
Change-Id: I86ef9c64e9a13db2fd79fc5781eaa5456be78f36
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The instructions were made more to the point and clearer.
Optional and necessary steps are now easier to identify.
Change-Id: I3f4dc16b1dc0a7e64ae888ed050d266fa1d59645
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Based on Carol's original contribution. Edited based
on comments made to the original change.
Added better labels and links to other places in
the docs.
Change-Id: Iaff7d1849d7ab7c8276ac9fca87070442ce956fd
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Corrected the :envvar: markup. Rewrote the text to be less patronizing.
Change-Id: I09ec541ae41ad682106dc73a6e4495216dfa34d3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removed prerequisites to fix the flow of the doc.
Change-Id: Ieed03a08c2794fe50d6be3b7d3496da5f4c4471c
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Introduces the first part Carol's original contribution. The original
contribution is broken up in multiple files. The updated toctree shows
the
files that will constitute the section. Edits for clarity,
redability and markup were also included. The old files were removed.
Change-Id: I29364c6bc94322c6235b51850c2d1b9f71eb1ad8
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removed the yous to be more concise and direct.
Second person phrasing can be overused making it redundant.
Change-Id: I849c0dce9a219962e724aade0cc4c5d57271cbe1
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Another pass to improve readability and eliminate wordiness
Change-Id: I028483b6630de195e157159e8491abde60bb683c
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
bt_init() is now static function and API should use bt_enable().
Change-Id: I565f30bf816282961b71ceae2bbe90d5d93e7b8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
