Test is configured with CONFIG_POSIX_API=y, so there is no reason to
check for it being enabled in C. Additionally when CONFIG_POSIX_API=n a
much "bigger" posix/sys/socket.h was included instead of net/socket.h,
which should be rather opposite.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This sample is not working on all boards anymore. Adding every single
shell we have to the prj.conf does not work on every board, due to
missing features.
Instead, we now change how shell modules are enabled and make it
possible to enable shell command and modules for any application when
CONFIG_SHELL is enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add timer label for this test suite, so it is included
in sanity check runs with -t timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
enable the test-suite that had been (always) excluded
from running on this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
re-enable the test-suite that had been excluded for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
re-enable the test-cases that had been skipped for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for 64 bit conversions in a uniformly expressable way by
printing values backwards into a buffer on the stack first. This
allows all operations to work on the low bits of the value and so the
code doesn't need to care (beyond the size of that buffer) about the
word size. This trick also doesn't care about the specifics of the
base value, so in the process this unifies the decimal and hex printk
conversion code to a single function.
This comes at a mild cost in CPU cycles to the decimal converter and
somewhat higher cost to hex (because it's now doing a full div/mod
operation instead of shifting and masking). And stack usage has grown
by a few words to hold the temporary. But the benefits in code size
are substantial (e.g. ~250 bytes of .text on arm32).
Note that this also contains a change to tests/kernel/common to
address what appears to have been a bug in the original converters.
The printk test uses a format string that looks like "%-4x%-2p" and
feeds it the literal arguments "0xABCDEF" and "(char *)42".
Now... clearly both those results are going to overflow the 4 and
2-byte field sizes, so there shouldn't be any whitespace between these
fields. But the test was written to expect two spaces, inexplicably
(yes, I checked: POSIX-compatible printf implementations don't have
those spaces either).
The new code is definitely doing the right thing, so fix the test
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1.Add a new testcase to verify multiple queues can be defined
2.Add some code comments to describe function performance.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Increased accepted difference between system clock and
k_busy_wait clock. Some platforms (e.g. Nordic SoC) are using
different clocks for system clock (low frequency) and k_busy_wait
(high frequency). If those clocks are driven from low accuracy
source like RC oscillator then difference may be significant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new doxygen tags for tests:
1. test_mem_domain_destroy
2. test_domain_add_part_drop_to_user
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Reason is that some threads tests have poor description Doxygen
tags. I decided to fix that situation in some tests which understand.
Update Doxygen tags for the next tests:
test_create_new_supervisor_thread_from_user()
test_user_mode_enter()
test_create_new_higher_prio_thread_from_user()
test_create_new_thread_from_user_huge_stacksize()
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
PA selection mainly depends on board design. So it looks like
device-tree is a better mechanism than Kconfig in this case. Use string
property with two possible values: "rfo" and "pa-boost".
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Test of the sys_heap_aligned_alloc() API. This is separate from the
existing heap test because aligned_alloc() requires a kconfig to
enable it that can change the heap block header format and will impact
code coverage of the "small" block variant.
It's a fairly simple whitebox test that instantiates a heap and then
enumerates all possible alignments within it, with and without
pre-allocated data, to verify that the resulting memory is correctly
aligned and the heap stays consistent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is done to support the idiomatic way of performing flush
operations, where the caller might not have access to the proper data
pointer. Also, there is no reason why reading from address 0 should
not be allowed.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
With addition of flash_get_parameters API call, it is needed to provide
support for the API to flash drivers.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This test has a very high failure rate on `qemu_arc_em` and needs to be
disabled until a fix is available.
To be addressed in #26163.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Passing TX messages from sockets was reworked for openthread
thus tests need to be created/updated in order to pass.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
A hardcoded path lenth of 80 will not be able to suppor the full length
of 255 when LFN is enabled. This does produce a compiler error,
thankfully, this is only applicable to the test cases.
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
After reviewing that test I found output looks too messy.
1. Remove words starting from capital letter in the middle of the
sentence.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update code comments in ringbuffer/src/main.c
modify a testcase to verify the address stored by ring buffer
is contiguous, and the size of every element is equal to the size of
pointer.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Introduce new test for eventfd, which will test it in only basic
scope. The real reason why this is introduced is to have a test with
minimal set of configuration dependencies, such as disabled
pthreads (compared to full tests/posix/eventfd/ variant). This allows to
test eventfd mechanism with both POSIX_API=n and POSIX_API=y.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The test takes ~175s to end on nrf5284dk_nrf52840 and was failing
due to too short default timeout (60s).
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
for RT series CONFIG_NOCACHE_MEMORY need enabled
for Kinetis series CONFIG_DMA_TEST_SLOT_START for test
modify the target and dest alignment
frdmk64f need replace strlen to sizeof in irq callback
clean the unused receive buffer, so output is tidy
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
