This commit adds the LiteX I2S devices usage example with:
- i2s rx and tx initialization,
- i2s rx and tx configuration,
- i2s rx receiving,
- i2s tx sending.
An application is a simple sound loopback - it allows to connect
a music source and a receiver such as headseat and listen to it.
Signed-off-by: Pawel Sagan <psagan@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add support for running the JEDEC SPI NOR flash sample on the ARM
Cortex-M1 DesignStart FPGA reference implementation.
Special care is needed to avoid overwriting part of the FPGA
configuration bitstream, which is stored in the onboard QSPI flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use non-default frequency 25MHz and Quad mode to ensure
frequency configuration is taking effect.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
An off-by-one error calculating the number of parameter headers caused
a third table to not be displayed.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add DT entry for the embedded QSPI NOR flash (GD25Q16) in the Adafruit
nRF52840 feather. Also added support for the spi_flash sample, which has
been used to verify the device.
NOTE: Device seems to fail when using high clock frequencies (e.g.
maximum QSPI frequency). It may be due to PCB layout issues.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Value of ret has been overwritten by flash_write_protection_set
before it could be returned from do_write_unaligned, which could
lead to reporting success when error code should have been returned.
Fixes#27641, Coverity-CID: 212142
Fixes#27642, Coverity-CID: 212143
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add a tag at sample.yaml to exclude the platform mec15xxevb_assy6853
because of unsupported. Refer github issue #27576.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
A zero value in the NPH header indicates one parameter header.
Increase the upper bound to process the last provided table.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
GPIO CSn active level transitioned from default active-low to
devicetree defined since the last time this sample was verified,
requiring the flags parameter in devicetree to be updated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The boards efr32_radio_brd4104a, efr32_radio_brd4250b and
efr32mg_sltb004a have an on-board nor flash. It is already present in
the device tree, only the driver needs to be enabled.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Removes 'flash' command function that displays the command's subset.
Command's subset will still be displayed in current code.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
On large memory areas printing 8 bytes/line is not enough.
Increased printing 16 bytes per line.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Adds unaligned and pattern write functionality.
The reason this was added is chips with large pages, e.g. 256 can't be
normaly writen via shell, thus the need to write a pattern with any
length to a memory area.
The unaligned write command allows writing a data frament in any place
in memory, the data backup, protection, erasing and writing is
automaticaly handled. This makes it easier to test all flash controller
functionality in one command, also write any persistent data to any
flash address.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The previous commits added the SAM0 DAC driver. Now document and
enable it, including enabling it in the DAC sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Adds native_posix hw counter model and the counter driver.
Functionality is needed by software which is tested
on native_posix and has dependency on counter.
Hardware model was developed similarly to HW timer model.
The counter driver wraps HW counter functions and exposes
basic functionalities: starting, stopping, setting and cancelling
single channel alarms.
Code was tested against: tests/drivers/counter/counter_basic_api.
Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no>
Ensure multiple OOB transactions can be perform back-to-back
Check OOB transaction response length matches is as expected.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a new configuration option, LORA_SX12XX, that is shared for all of
the LoRaMAC-node-based radio drivers. By default, the appropriate
driver for the LoRa radio in the device tree is included is included
in the build.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
This option should be selected by default, as right now LORA=y selects
REQUIRES_FULL_LIBC.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of whitelist, use a filter that checks if a required
"atmel,at45" compatible node is present.
Add a build-only test case to be used by CI and provide a harness
configuration so that execution of the sample can be also verified.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample still used the old name of the nrf9160dk_nrf9160 board,
both in documentation and sample.yaml. Because of the latter, this
sample was not picked up by sanitycheck, what resulted in compilation
errors in the spi_flash_at45 driver not caught by CI.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Due to counter driver implementation change
"driver/counter/counter_ll_stm32_rtc.c: Add 1 tick to alarm"
It is necessary to adapt sample test (sanitycheck)
to take into consideration 1 tick precision/tolerance.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds a sample application intended to present capabilities
of the flash driver for AT45 family chips and to serve as a reference
of how to make use of that driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The LoRa shell requires the alias 'lora0' for the default radio. Use
the same alias for the samples to make them portable across different
radios and devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
LoRa drivers no longer depend on CONFIG_COUNTER. Remove this
configuration option from the samples.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
