Fixed the return values for read and write APIs for spin_nor.c
which were not inline with what the corresponding interfaces
were meant to return.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Current implementation had fixed initial speed, this commit
fixes TWI and TWIM shims to use configuration from DTS.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Coverity complains that packet_len can get assigned a negative value if
usb_dc_ep_mps() returns an error. This is correct, however it only
happens if the endpoint address is invalid, and in that case the value
is not used as the endpoint address is also validated in
usb_dc_ep_write().
Fix the issue by moving the assignment after the endpoint address
validation and by accessing the value directly instead of getting it
through usb_dc_ep_mps().
Fixes#11481
Coverity-CID: 189742
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Enable cache operations before starting a DMA operation if the CPU has a
cache. All the support was already in place, it just needs to be
enabled.
With the previous commits, it allows the I2S tests to pass on a SAM E70
Xplained board with the CPU cache enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This effectively reverts part of earlier 49bb163756 which moved
interrupt acknowledgement until after return from the user callback.
This was done confusing the flow of this driver with how some other
drivers do it, where pending interrupt status is checked by
uart_irq_rx_ready()/uart_irq_tx_ready(), which should be called by
the callback. But the uart_cmsdk_apb driver actually uses different
hardware register in these functions. And acking IRQs after user
callback can lead to race condition and losing an IRQ, and the
simple fix in this case is just move acknowledgement to where it
was before.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Nordic USB driver shim uses nrfx_usbd driver from nrfx package.
The driver was protected by a semaphore during every transfer
to prevent access from multiple threads at the same time.
This leads to the problem when a class schedules transfer on one
endpoint before host asks for the data (to be sent later) - driver
is locked and other endpoints (including control EP) are blocked.
Currently, only driver calls are wrapped with semaphore without
waiting for the transfer to complete, allowing scheduling transfers
on different endpoints. This is allowed bu nrfx_usbd, however
shim prevents user from scheduling multiple transfers on one
EP (required by nrfx_usbd).
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Calling fifo_fill function from uart_nrfx_uarte in the same
interrupt more than once, would break previous transmission.
Following fix adds checking if previous data was sent, and
if not, returns 0.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The Interrupt Controller on the Quark D2000 doesn't support irq priority
to just pass 0 in the for the priority instead of CONFIG_ADC_0_IRQ_PRI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We were hard coding the SPI bus name to "SPI_3". Instead we should use
DT_INVENTEK_ESWIFI_ESWIFI0_BUS_NAME as its generated from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was using the straight alias generated defines, however we
want to use DT_ prefixed defines so its clear that the values are coming
from DT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This ensures compatibility with Silicon Labs EXX32 MCU Series 1.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Nothing builds this driver and the driver hasn't been updated to the new
ADC api so it does not compile. Remove it sinces its effectively dead
code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the sector size rather than the page size as some
modules that consumes the flash page layout (such as FCB)
assume the page size is the minimal size they can erase.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This is a follow-up to commit b3ca789ef2.
Apparently, another driver needed to be updated but this was not caught
up in CI builds at that time.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Modem driver for WNCM14A2A was erroneously leaving the
selection of UART_INTERRUPT_DRIVEN up to CONSOLE_HANDLER.
Now, with the move to the new SHELL backend, this is no
longer happening.
Let's select it from the modem driver, instead of depending
on it.
Let's also add a dependency on SERIAL_SUPPORT_INTERRUPT
which the serial drivers enable to let us know
UART_INTERRUPT_DRIVEN is available.
Signed-off-by: Michael Scott <mike@foundries.io>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a flash driver for the Atmel SAM E70 SoC. The driver has
been kept simple by considering that the flash is only composed of 8-KiB
blocks. Indeed an area at the beginning of the flash might be erased
with a smaller granularity, and the other blocks can also be erased with
a higher granularity. It also only handles the global read/write
protection, not the 128-KiB lock regions. A write error is returned if
a region is locked.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enables Networking hardware on i.MX-RT type drivers.
Reuses the same eth_mcux driver used by Kinetis family; initialization
sequence refactored to work with this board as well. Unlike Kinetis
family, i.MX has a single ENET interrupt and we need to discriminate
between interrupts using a status register.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The Zephyr console and shell interrupt processing assumes
a TX interrupt is evoked upon first enabling the TX
interrupt via uart_irq_tx_enable.
This was not the case with the cc32xx uart, coming out of
reset, with FIFO's disabled.
The only way found to achieve this behavior is to fill
the fifo with a non-printable character on initialization.
Also, the uart driver was explicitly clearing TX/RX interrupts in
its isr, which was unnecessary, as the act of reading/writing
did that implicitly.
These fixes allow the cc32xx uart to work with the
current Zephyr console/shell design.
Fixes: #11202
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The commit 0c2ef4ea3d "drivers:
watchdog: Watchdog API redesign" introduced an API redesign for the
watchdog drivers compliant with Zephyr.
This patch updated the CMSDK Watchdog driver to be compliant with the
new API.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Convert the Atmel SAM0 watchdog driver to the new watchdog API and
enable DTS support.
This fixes#10914.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add driver for i.MX Messaging Unit peripheral which can be used for
i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
If the configuration is already installed, there will no need to
reconfigure the controller all over again.
This was missing for mcux_dspi, mcux_lspi, sam and sam0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the in tree user of cc2520 uses device tree to configure SPI
and GPIO params, we can remove and convert the driver to utilize DT
only. This means removing the Kconfig options that come from DT and
rename CONFIG_ to DT_ for those options.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all SPI controllers support DTS we can remove the Kconfig
support for non-DTS options. We also cleanup some defines that should
have be DT_MCR20A_ instead of CONFIG_MCR20A_.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
