Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Ensure > is an independent argument.
The ; will ensure that the `>` and `outfile` are given as two arguments
and thus ensure correct behavior in all cases.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
According to the PRMs of both ARC EM & ARC HS families on entry
to Fast IRQ handler ARC hardware saves PC (Program Counter) value
of where processor was right before jumping to the IRQ handler into
2 registers: ILINK & ERET.
But it turned out in case of ARC HS (at least in configuration with
Fast IRQs & 1 register bank) only ILINK was populated with the
previous PC, while in Zephyr we relied on what we read out of ERET.
That lead to funny issues when CPU returned from IRQ handling
to some unexpected location.
And now with that precious knowledge we're switching to return
address recovery from ILINK so that with both families of ARC
processors (EM & HS) we may get reliably good results.
The wrapper is few cycles shorter/faster as well, as we may shave off
another extra instruction for transferring ERET value from its AUX reg
to a scratch core register to be later stored in the memory.
+----+---------------+---------------+--------------+
| | FIRQ | RIRQ | RIRQ(Secure) |
+----+---------------+---------------+--------------+
| HS | ILINK=PC | ILINK=PC | NULL |
+----+---------------+---------------+--------------+
| EM | ILINK=ERET=PC | ILINK=ERET=PC | ILINK=PC |
+----+---------------+---------------+--------------+
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
It raises an error in case the source data width differs
from the dest data width.
The dma_stm32_width_config function is no more useful: removed.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When adding the new partition to a memory domain the system must
assert that it does not overlap with any other existing partitions
in the domain.
Test to add new partition which has same start address as an
existing one, after that must happen an assertion error indicating
that new partition overlaps existing one.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Handle the difference of GNU & MWDT assembly for ARC-specific
code guarded by CONFIG_SMP define. That fixies SMP platforms build
with MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The current SAM4S define at board level common flags that should be on
soc defines. Add common flags at SoC Kconfig defines and drop the
correspondent at board defines.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current SAM4E define at board level common flags that should be on
soc defines. Add common flags at SoC Kconfig defines and drop the
correspondent at board defines.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Legacy functionality in ull_conn will force scheduling of a connection
which has missed an anchor point due to lost RX. This kicks in either
for previously skipped events (latenzy_event != 0) or at random
depending on the randomness of the AA bit pattern.
This behavior is good at ensuring that a connection with errors or
aborted RX gets prioitized, and helps break locked round-robin
patterns with lost sync, but it also breaks the predictability of
the round-robin ticker scheduling.
With "must_expire" enabled, this feature also kicks in for scheduling
collisions, which may not be desirable.
This commit adds a configuration flag, BT_CTLR_CONN_RANDOM_FORCE, which
is default enabled (legacy behavior).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix missing initialization of periodic interval value in
advertising report info structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clarify that the acl_data struct includes the bt_buf type as the
first variable in the user data struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out implementation of functions defined in buf.h to its own
source file buf.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add separated Kconfig file for Bluetooth 5.1 Direction Finding.
Enable controller support for:
- transmission of CTE
- 2us antenna switching
- 1us antenna switching
if build for nRF52833 SOC.
Add HAS_HW_NRF_RADIO_BLE_DF to nrf52833 SOC configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Increases the loopback buffer count to 8 in the mesh demo to give it
enough room for buffering the configuration messages in the
initialization step. As these messages are sent in a non-blocking
manner, they'll all be queued up for execution before any of them is
processed.
Fixes#30207.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a cli_reset to mod_sub if no status response was requested. This
adds a non-blocking mode to the mod_sub calls, matching the behavior of
other cfg_cli functions.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Missing copy net_idx to ctx, this cause tx subnet not found
or different with rx subnet, when rx subnet net_idx not zero.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In native_posix, the code calls k_busy_wait() but with wrong
value (k_timeout_t instead of int).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, nightly releases are performed in Forks as well.
Since these fail due to missing AWS credentials this causes
a lot of messages about failing builds, this commit disables
them for Forks.
Signed-off-by: Max Bachmann <kontakt@maxbachmann.de>
The bug on TFM that prevented to enable MPU on NS side is
fixed on TFM current version.
MPU can now be safely enabled on NS target.
Fixes: #27809
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Usage of mem_pool for all IN endpoints was removed in
commit b3c63425a0 ("usb: driver: Reduce Endpoint buffer pool.")
Remove also k_mem_pool_free for all IN endpoints.
Fixes: #30213
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update manifest pointer for the TF-M module,
so it excludes building the Non-Secure regression
tests (it should be TEST_NS=OFF by default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The currently supported version of ELM FAT limits supported mount
points to selected strings; all allowed mount points have been
listed in note of fs_mount.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The current name Socket TagoIO HTTP Client still refering to directory
samples/net/sockets. Rename to TagoIO IoT Cloud HTTP Sample to reflect
better the application sample intention.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There are some hardware combinations (board/shields) that report the
error undefined initialization levels used at link phase. Add pinmux
Kconfig at project configuration to fix the issue.
Fixes#30029.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update manifest pointer for the TF-M module,
so it picks the bug fix for nRF5340 debug
authentication initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a new driver category for memory controller
peripherals. There is no API involved for now, as it has not been found
necessary for first implementation.
STM32 Flexible Memory Controller (FMC) is the only controller supported
for now. This peripheral allows to access multiple types of external
memories, e.g. SDRAM, NAND, NOR Flash...
The initial implementation adds support for the SDRAM controller only.
The HAL API is used, so the implementation should be portable to other
STM32 series. It has only been tested on H7 series, so for now it can
only be enabled when working on H7.
Linker facilities have also been added in order to allow applications to
easily define a variable in SDRAM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
