Add pinmux settings for lpadc to LPCXpresso55s69 and LPCXpresso55s28
boards. Enable ADC driver sample for LPCXpresso55s69, to aid in testing
pinmux settings.
Fixes#45401
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This update Atmel sam afec driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. In addition, it
add overlay files to allow run samples/drivers/adc example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a basic device tree overlay to support the use of the ATSAMD21 XPro
dev board with the ADC sample application.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
All drivers that require input_positive to be set should be given it.
Some parts may require an offset, so abstract this away too.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
ADC support verified with driver sample. LPADC1 channel 0 pin used,
which maps to pin 10 on J9 on the EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables ADC1 on the RT1020 evaluation board. Channels 10 and 11 of this
ADC are exposed as pins 1 and 2 of J18 on the evk.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables ADC on RT1015 evaluation board. Channels 1 and 13 are exposed as
pins 2 and 1 of J18 on the EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added ADC support to RT1010 evaluation board. ADC channels 1 and 2 are
exposed as pins 10 and 12 of J26.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds ADC support to RT1024 EVK. ADC channels 10 and 11 are enabled as
pins 2 and 4 on J18 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables the ADC on the RT1060 evaluation board. Channels 0 and 15 of
ADC1 are available on pins 1 and 0 of J23, respectively.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add adc to board dts file,
update yaml files and documentation,
add adc 1 channel pins 1 and 15 to the pinmux file,
add overlay file to the board adc sample,
add board to the adc test file and
Signed-off-by: Andrei Auchynnikau <ovchinnikov@strim-tech.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Add some changes to adc sample to enable valid verdict generation
using twister:
-Replace 'single_line' keyword with correct 'one_line'
-Remove parenthesis from the sample output to enable regex verdict
-Add timeout to save time in execution
Additionally, add support for disco_l475_iot1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This sample shows how to use the ADC API. Depending on the support of
sequential reads in the driver, 1 or 2 channels are read and printed.
A devicetree overlay is necessary to specify the used ADC channel(s).
Signed-off-by: Martin Jäger <martin@libre.solar>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ADC driver sample is now using system log.
Change-Id: I44f5189b3beb09a14d87842c5968127460eda710
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-311
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
