Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
DISK_SDHC_VOLUME_NAME is already defined within an 'if DISK_ACCESS_SDHC'
block, so the 'depends on DISK_ACCESS' is redundant.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix an issue in the SMP identity distribution where the IRK for the
default identity was always distributed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There's desire to be able to customize parameters on a per-filesystem
basis, which means we need a way to override the Kconfig defaults which
are global. This also means the littlefs data structure cannot own the
cache and lookahead buffers.
Switch to using a macro to define the littlefs data structure. The
default version uses the Kconfig constants. A custom one takes
arguments providing the most likely partition-specific parameters.
Finally the user is free to bypass the helper macros and set any
parameters desired, though validation is limited and only present when
CONFIG_DEBUG is enabled.
Extend the test suite with a performance module, which confirms that
these settings have an impact proportional to the log of changes to the
cache or IO sizes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Existing file system implementations do not provide the special "."
(current) and ".." (parent) directory entries in the readdir results.
littlefs does.
Remove these entries in the abstraction layer. This simplifies code in
higher level consumers that aren't prepared to see them. Consumers like
FUSE that need them can put them back without having to worry about
conflicts.
Closes issue #17951
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The previous way of creating an absolute path relied on snprintf(), and
when used with newlib gcc warned that the output could be truncated
before the last format character. Rework to use code that doesn't rely
on snprintf.
See discussion at https://bugzilla.redhat.com/show_bug.cgi?id=1431678
Also ensure that cwd is always NUL-terminated, and use the utility
function to create the absolute path in cmd_trunc.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
littlefs is a fail-safe filesystem from ARM Mbed that has wear-leveling
capabilities.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Jim Paris <jim@bolt.io>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug introduced by: 45da629b24
Mistakenly set the own address type to the destination address type.
Also this uses the RPA_OR_RANDOM in case local IRKs exists in the
controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'registered' flag was not cleared when 'gatt metrics off'
was called so that one was unable to register the service again.
Remove 'registered' variable that is actually not needed as there
is no tracking if service is already registered in similar
cmd_register_test_svc command. If the service is already registered,
the host will log an error.
Fixes: #17882
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The sector size is 0 will pass "fs->sector_size % info.size" then start
a loop in nvs_startup() and never return. So retrun an error if the
sector size is 0.
Signed-off-by: Harry Jiang <explora26@gmail.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The init addr should contain the on-air address used to establish the
connection. The dst address contains either the current RPA of the
unknown peer, or the identity address after identity information has
been exchanged.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue where the generated identity was not permanently stored.
This resulted in being unable to reconnect after bonding when using
privacy, since a new local IRK was generated on reboot.
When settings is enabled the application is responsible for loading
identities and possible creating its own identities.
When settings_load is called and no identities has been created or found
in persistent storage a new identity will be created.
Since bt init has not been finalized bt_id_create will not make a call
to bt_settings_save_id. So we need to make sure that this identity will
be stored.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
The sdhc_cmd_r1_raw() function doesn't take into account the existence
of commands with data response. Because of this, some datas were being
lost.
The commands that return a r1 response and a data are: SDHC_SEND_CSD,
SDHC_SEND_CID, SDHC_READ_SINGLE_BLOCK, SDHC_READ_MULTIPLE_BLOCK,
SDHC_WRITE_BLOCK, SDHC_WRITE_MULTIPLE_BLOCK.
In order to solve this, was juts necessary skip the byte discard when
the command is one of these.
This problem was affecting, for example, the sdhc initialization. The
token returned from SDHC_SEND_CSD was being lost and the initialization
was broken.
Fixes#15444.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Apparently, settings were relying on other headers
including kernel.h, once that include got removed from the
logger header samples fail to compile.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleaning up log.h include dependencies to allow log.h including in base
headers (e.g. kernel.h).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The call to bt_conn_security will send a SMP security request for
peripheral, and for central it will initiate LL encryption.
A call to bt_conn_security with no IO capabilities but authenticated
keys has been distributed, would succeed on central side, but fail on
peripheral side with error code -22.
The keys could have been either:
- Preprogrammed
- IO capabilities may have changed.
- OOB bonding may been used.
Fix so that Peripheral can send a security request if the bond
information is already established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The content of subsys/fb/cfb_fonts cannot be replicated by the existing
script due to lack of positioning options and use of a full-color frame
buffer, which affects the generated bitmap. Switch to the solution used
in the original script, add the required options, and document the
process of regenerating the fonts.
This commit also determines the required bounding box for the glyphs to
be sure that the user-provided value is sufficient to avoid partial
characters. Ideally the calculated width and height would be used for
font characters, but this would require significant restructuring of the
script to make calculated values available at the point where the
arguments are used to produce output.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
