Added -e option to echo-client and it will not quit but just
send data forever to the echo-server.
Change-Id: I9085220844b5bc45b2b7fffc46fb1b9e93235307
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive too long message in dummy radio driver,
then we need to discard the packet as we cannot handle
it anyway.
Change-Id: Ibed0ac5f1568dd791dec3e780c7f6c71914d02cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 802.15.4 monitor application had issues with connecting
pipes together and making sure the first byte from qemu is
not lost. Before starting real data connection we send five
null bytes and the discard them in receiving side.
Change-Id: I376ae4f79aaa1ea742640999ec5b3d9c57a1279a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Dummy 802.15.4 has now some additional check to verify that we
are really sending correct amount of bytes.
Change-Id: I4d223c02e2628966e3b1a3cdcf7b560043d7d788
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the stack is sending network packets by itself, like when
sending router or neighbor solicitation messages, then remember
the original length of the message. This is important because
uIP stack will clear the length of the sent message after it
is sent.
After this change, the lower level drivers can use
the net_buf_datalen() to get the original length of the
buffer. The issue is seen because uIP stack is running in
different fiber than the network device driver.
Change-Id: I6078c5d716bba455a93be9be122e97cd24b8dc0e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how much data we are losing if
null fragmentation is used.
Change-Id: I2f18d180a4c75768534de851c7cc27c3e70ca310
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding selection of 6LoWPAN compression method to Kconfig.
Possible values are:
* no compression
* IP header compression
Change-Id: I8721fa683f7488ec9ad0bf37f6637fa264c2038f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can set the desired network id from Kconfig.
Change-Id: Iac9de1deb2b01bcfcb3382849d451dce1a05077a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When 802.15.4 code is receiving the network buffer, the uIP
stack might have zeroed the buf->len value. Restore it back
here so that other parts of the stack will get sane value.
Change-Id: I8fb3c1d3a3c9b0f41f3915d0f31d78afeccf68b6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Parent link metric was incorrectly printed.
Change-Id: I479820f850d8e9a5459667d58bc35c8174a77559
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When enabled, probes will be sent periodically to keep
parent link estimates up to date.
Change-Id: Ia7f1fe7cd28bb487c64a41159fffdf3665e9e1df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User needs to be able to configure used OF as all RPL nodes
in DODAG need to use the same OF. Default OF is MRHOF RFC 6719.
Other alternative is OF0 RFC 6552.
Change-Id: I6d135a6a2c6880a919993e29b0985d4c686b8a9d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The etimer.c does not need to know about ctimer_process so
remove the extra variable.
Change-Id: I761a9d79c09876c5270e294dd008a8821705e9a2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code did not mark net_buf to be freed in a case of error
when receiving data. This caused the system run out of network
buffers very fast. It is necessary to set uip_len variable to 0 so
that the upper stack can free the buffer in this case.
Change-Id: Id5e009affcb2ce916f21fcf60060efb1c6d1ec0c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a net_buf when a network packet is about to be sent.
Earlier one statistically allocated buffer was used for sending
RPL packets but this did not work well enough and it cluttered
the RPL APIs with redundant net_buf parameter.
Change-Id: Ib4160167f8deac83c30852af2346acdf6c6f711b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the timer is set, the caller needs to specify the function
that is called when timer expires.
Change-Id: Iae69986c6f32b789d708247b187d143e45d73828
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RPL support needs bigger stack than 600 bytes.
Change-Id: If61fb2b4874d32d6e02c8e510cccd45246332da5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print RPL statistics in the general IP statistics printing
function if CONFIG_RPL_STATS is defined.
Change-Id: Iefc3a1e5186b052e91b17309a6e9fdeb2fa70886
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Need to use pointer when printing link address.
Change-Id: Ied7fcbefc02034e0ddbe714716b883de33d1e724
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For RDC (Radio Duty Cycling) we activate nullrdc driver
if 802.15.4 is not used.
Change-Id: I793b84ee8e81cdbc8315758f1b83f7ad3bd7555a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These features set are not experimental anymore.
Change-Id: Ia9e4803982f625157e78c8002c38fed1e95c4892
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Tinydtls had its own .gitignore file that masked away two
include files that are needed in compilation. Removed
the files from ignore file and added those two files.
Change-Id: Ibcfcf4e18ca8f56eef97d41464c4233148e9db9e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use correct config option to either enable or disable
neighbor discovery.
Change-Id: If67219cfa71893d2805b37e5ab3bbd11af789cb5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to give the pipe names as the default values can be
used instead.
Change-Id: I610d07b860a32b55e6c68e7b2869218b29c8f304
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The duplicate address detection check was not run properly
in periodic timer. After this patch the IPv6 address is
marked properly as preferred if DAD succeeds.
Change-Id: I2b4ad91b2c851dca51a52635ef2dea92fb5b58b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only meant for testing the network. This must not be
enabled in live system as it takes memory and processing power
for each sent or received network packet.
Change-Id: I223a087175b19c8561743a1fcceb659be2356c4d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function that returns the link address that the system
is using at the moment.
Change-Id: Id09aed3f6cbc4cd3ee694e18441f7443f0b7c3bf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the etimers are triggered in main event processing
function in tcpip.c
Change-Id: Ib521b9291c768245a9f35f3502b3b173abe08ee9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Contiki etimers need polling which is handled by this fiber.
This fiber sleeps until next etimer is to be triggered. If the wakeup
time is long, we wait max 60 sec so that new timers can be triggered
also. This 60 sec timeout might be too long and require tweaking when
we know how the system behaves.
If there are no etimer event in the system, then the timer fiber
will only sleep 2 seconds before checking the timers again. This
interval might need tweaking also.
Change-Id: If34b97073882d8b273941cfb0be36df6aac97cf8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add sample radvd.conf and instructions how to use it in README
file. This is needed if user wants to use IPv6 SLAAC (stateless
address auto configuration) when using qemu setup.
Change-Id: I3c9c34cfcc1bc88117a1c70a5d3ef6b5e56739f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a new TX net_buf when sending neighbor solicitation
message instead trying to use the existing RX net_buf. This
simplifies and unifies the RX and TX buffer management.
Change-Id: Ia1c42f7fef720ad85fe1c599c3c2ec9ea2c024b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending IPv6 packet, make sure that the net_buf is valid.
Change-Id: I0027f42f307c09b3add42f430abf759bd88d63c5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a separate buffer when sending RS, RA and NS ICMPv6
messages to the network.
The ICMPv6 messages are:
RS = router solicitation
RA = router advertisement
NS = neighbor solicitation
Change-Id: Ibe5a1701f78f72dce6460f77e9f659b16c355640
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Debug prints were missing line feeds + spaces in neighbor
discovery code.
Change-Id: I1373af38cc7eae103d1a1da527430f2eb63e6b7a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to disable IPv6 neighbor discovery.
Normally ND should be enabled but for testing purposes
the ND can be turned off as it simplifies the network
setup.
The default value atm is not to run ND because
we do not have a proper network setup. If user is
running qemu image, then ND should be disabled because
ND does not work properly with tun device.
Change-Id: I0ab7d6ee2ea3bc70918d9adf6f44473f71b3bd29
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor solicitation message sending had a typo.
Change-Id: Ia2a8b5c0eef60acc093463eb24f33bbe8fb93421
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now we can wakeup properly if there are multiple Contiki etimers
in the system.
Change-Id: I356818f4b79427c9bf26afca31b1a0766760ca3d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The clock_delay() function sleeps now correctly either
in micro or nano kernel.
Change-Id: I1df71b64c5f0b46d963ee117252e41be3ddfb1df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IP networking depends on CONFIG_NANO_TIMEOUTS and
CONFIG_NANO_TIMERS support so select them automatically
in Kconfig.
Change-Id: Ib3a86ca5a2006da545bed8c13b631d6a8c45ea99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net/ip/contiki/tools directory was not in proper place
as it contains also non Contiki code. The net/ip/tools is
a more suitable location.
Change-Id: I1eb621680d4247d56d67ea977120f3c67c013599
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The observe client routines need to allocate a net_buf that
will hold the sent UDP data.
Change-Id: Ia04aacdde266aa93de1b9941eeed0c8292ca83b8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a transaction is retransmitted, we need to allocate a
net_buf that will hold the actual UDP packet to be sent.
Change-Id: Ie0d51694b5531938cd1da5c330a308e3e9fd1764
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add coap_context_connect() function so that client can use
it both in DTLS and normal connections.
Change-Id: Ibd8cff904e79a97f97ed6ff20d92078eff110e35
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use only integer arithmetics when calculating the timeout
value.
Change-Id: Ifc61e1eee4a9a680e9c4f8c89f146417d6cc5ba4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the transaction allocation fails, then print additional
information in order to find the place of the failure.
Change-Id: Idd59969b2c5eff53170b51a471583ec8c837416a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mid needs to be init from server and client code so
create a new function for it.
Change-Id: I662b64c207ac69288648ffbdc950896edd5ade52
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor etimer and timer Contiki APIs to use the native
Zephyr timers. The Contiki way did not work well anyway
as we do not really have the process concept in Zephyr.
Change-Id: I14743707f3cf43eddfe914717b069204cde4bd65
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The clock_seconds() API returned wrong number of seconds since
initialization.
Change-Id: I4f0f6197327f4ebe12e2c37588d9611ec40d7643
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
