Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a test configuration to build a controller that
supports only Bluetooth v4.0 features.
This is copy of prj_controller.conf, but Kconfig defines
will be added in subsequent commits to conditionally
compile out feature not in Bluetooth v4.0 specification.
Also, added nrf52840_pca10056 and arduino_101_ble board
builds be tested.
Change-id: I36891bfc54cc36a8588c9b019de582e3193e8aa3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Stack for fiber idtSpurFiber at tests/legacy/kernel/test_static_idt
for nanokernel is not big enough since printk parse context refactor
(commit 3ab6046), causing sanity check to fail with CONFIG_DEBUG=y.
Change-Id: Iddc74a2800163a22be985067ce828ac859ae4a24
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
By default, when a 'fatal fault' message is seen in the output of any
testcase, it is consider an inmediate fatal condition and the test
case is aborted.
However, this testcase is provoking the situation to verify the
condition is caught. This, it shall NOT be considered a fatal fault
and the default overriden to allow it to proceed.
This was done in the legacy testcases and now is moved to this
testcase, ported from legacy.
Change-Id: Icac6cf55cae2ffd9b071e9dd1f35918b7b30de5e
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Stack for task tStartTask at tests/legacy/kernel/test_sema/microkernel
is not big enough since unfied kernel was enabled by default for all
test (since commit c2de216).
Change-Id: I3332cd5e14ca384428834697a1841fa680a68b00
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Fix build error (picked by GCC 6.x):
error: ‘stack_size’ defined but not used [-Werror=unused-const-variable=]
Change-Id: I402324fedaea9d0a10ee6533ba957ce18fa0fb83
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
quark_d2000_crb does not build as ROM and RAM space are way too little
for it.
Change-Id: I1a5992dcd49f90fa6604cd8ab76db7e170be7cd4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a test for the available space for the payload, so the problem with
the payload length doesn't regresses.
Change-Id: Ifef541d8428947eb482729aa773a7e9ddd2b6f81
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes:
error: format '%u' expects argument of type 'unsigned int'
Change-Id: I02aaaea79150967d7831d89d0c05427bf2685708
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit include 5 ztest cases, cover the basic gpio APIs
including callback relevant and pin read/write functions.
It proves workable on intel quark c1000 and
arduino 101 platform
Change-Id: Iab30aa841cfa440c1f773b5a8c5ce0d68346c353
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit cover below apis by testing callback under RISE polarity
*) aio_cmp_configure
*) aio_cmd_disabel
Change-Id: Idc9ec3a2694950d0074b69d164ee2c1edac35c9a
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the commit cover basic message queue api testing across contexts
and some typical scenario
Change-Id: I82bb0c6a5df9d4436f5a98f78d1ad989e32282c8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add semaphore test case which cover basic sema apis
across thread/thread and thread/isr contexts.
Change-Id: I2041969fcdc70a4dfc95438f067fbef8ebb31b19
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add unified kernel mutext test cases which covere basic
mutex apis under different conditions - timeout,
no_wait, forever
Change-Id: Iaab5bba80a6eebd89bfe675352d67b27024ad7bb
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add stack test cases which cover basic api usage across
threads and thread/isr.
Change-Id: I1f42fa1139899c932a14da18753b93972f561bc8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In unified kernel, memory maps are renamed as memory slabs.
This change ports tests/legacy/kernel/test_map stuff to
use unified APIs.
Change-Id: Ibf4d60fb53e45a119e6828a09f2638ee7def76b7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_critical test case to
the unified kernel, and to use the ztest framework
Change-Id: I10834cbb51446b4a12fc680c0b65438d550f4d85
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the port of the legacy/kernel/test_context test case to
the unified kernel
Change-Id: I344ac240eb3b48042477f8875115fdc3fca1154a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit cover Interrupt Reset mode and Reset mode by 2 test cases.
They can't be tested in one shot, but need test separately.
api converage:
wdt_enable()
wdt_disable()
wdt_set_config()
wdt_get_config()
Change-Id: I44b20cfe97d860e8b25b2cab76f9d9398cfd8e69
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
the test include 2 ztest cases, verfy below apis:
rtc_enable()
rtc_disable()
rtc_read()
rtc_set_config()
rtc_set_alarm()
rtc_get_pending_int()
Change-Id: Ifca2541312c5ec8d450803f1b6e4f5064098e7fe
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test case is under test set "lifecycle" against
https://www.zephyrproject.org/doc/kernel_v2/threads/lifecycle.html
Change-Id: I0d43c1a1798411c786efc45d76e6fd7c024c47dd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: Iaadba1a720130a496a83c245c7da4b95dff168fd
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make the buffer length for tx and rx are the same for
spi_transceive API call. QMSI only supports equal length.
This is clearly specifed in spi header file.
Also correct some coding style issues.
Change-Id: Ifd34683e8813dae9b692ad453176a93cb3848427
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
From code inspection, the driver always took timeouts in milliseconds.
The only sub-ms wait uses k_busy_wait(), which has microseconds
granularity, but its granularity does not depend on the system clock
tick rate.
Change-Id: If48363fd1fbeeb8e5ff0f0f2ca86e671d63bc571
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
the commit cover alert send and receive with 4 types -
DEFAULT, IGNORE, PENDING, CONSUMED which across thread and isr
context.
Change-Id: I41dae9ba2dc980bcd768f1220f55b5492bc8ae37
Signed-off-by: jing wang <jing.j.wang@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
