The second argument of this foonction is a bool, so passing 0 and 1
is incorrect.
Coccinelle script:
@@
expression e;
@@
flash_write_protection_set(e,
(
- 0
+ false
|
- 1
+ true
)
)
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
To get a list of all supported shell commands user must hit the TAB
button. It may be awkward on some terminal emulators. This change
enhances the help command in a way it will in addition print all
supported commands.
Fixes: #28785
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Functions shell_help_subcmd_print and shell_help_cmd_print
are more generic. Now they can operate on command passed as an
argument not hard coded active_cmd.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Generates a warning message when building with
CONFIG_TEST_RANDOM_GENERATOR. The purpose is inform that this is not
secure and should not used in production.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The scan callbacks may be NULL, which would cause an error if
e.g. the timeout callback wasn't set and the scan terminates after
a timeout.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using zephyr's internals zsock_ calls make mqtt library more compatible,
now it does not depend on NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No real need to assert when the send timer is cancelled. Just
check if there is re-transmission going on and do nothing if
there is not.
Fixes#28758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local and accepted socket was not bound which caused the
local address to be set as NULL. This then caused issues when
zsock_getsockname() was called by the application.
Fixes#28735
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix conditional compilation to allow building test shell
with Periodic Advertising Sync alone.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix controller implementation to cancel peripheral latency
when initiating new control procedures.
Fixes#28699.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks to abort connection radio event preparation and
start, if the connection terminates with a race condition
with new radio event being prepared or being in prepare
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the info parameter is only read from and never written the const
in the function parameter should be present.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Fix undeclared CONFIG_BT_CTLR_DATA_LENGTH_MAX when Force
MD bit automatic feature is enabled in nRF51 Series.
Fixes#28774.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds additional Kconfigs that allow for changing
configuration values for the Zephyr port in OpenThread.
Those values are:
- number of the internal OT message buffers
- number of the state change callbacks
- number of the EID-to-RLOC cache entries
- size of the NCP buffer
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Instead of directly checking the multicast IPv4 address, use
the net_ipv4_is_addr_mcast() utility function.
Fixes#26584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MQTT client state is protected using mutex. That mutex however is
temporarily unlocked when calling event callbacks. This means that in
client_disconnect() transport can already be disconnected, but without
marking it as such in client->internal.state.
When mutex is unlocked in event_notify() function, then there are two
possible paths of failure:
1) First possibility is when RX and TX are called from two separate
threads, so that the other thread gets resumed and functions like
verify_tx_state() (e.g. in mqtt_publish()) allow to continue
communication over disconnected medium.
2) Another possibility is that user calls mqtt_abort() or
mqtt_disconnect() in event handler.
In both cases MQTT library tries to send or receive data, possibly
followed by second close() of underlying file descriptor.
Prevent using disconnected transport by clearing MQTT client state right
after calling mqtt_transport_disconnect(), without releasing mutex, even
for a while.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When compiling with CONFIG_NET_NATIVE=n and CONFIG_NET_OFFLOAD=n
then the following error is printed.
```
In file included from zephyr/subsys/net/ip/ net_if.c:23:0:
zephyr/subsys/net/ip/net_private.h: In function 'net_context_state':
zephyr/subsys/net/ip/net_private.h:58:27:
error: type of 'context' defaults to 'int' [-Werror=implicit-int]
static inline const char *net_context_state(context)
```
This add `struct net_context *` as type for context.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Depending on the Bluetooth features enabled, the HCI
packets can be 264 Bytes long. For HCI over USB the HCI packet
is handled in data stage of USB transfer. Buffer for the data
stage was too short and USB driver was STALLing the data stage
making it unable to complete. Extend the data stage buffer
to 266 Bytes if HCI USB is selected and BT_RX_BUF_LEN > 127
indicating that longer HCI packets are needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Since commit b3a1ede830 OpenThread uses the Zepyhr settings submodule
instead of writing to the flash directly. The flash.c file is not
compiled anymore, so let's just remove it. Also remove the
OT_PLAT_FLASH_PAGES_COUNT Kconfig option which was solely used by that
file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added automatic runtime calculation of Forced MD bit count
based on incoming Tx buffer throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Force MD bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data. MD bit in Tx PDUs is forced on if there has
been CONFIG_BT_CTLR_TX_BUFFERS count number times Tx/Rx
happened in a connection event. The assumption here is,
if controller's tx buffers are full, it is probable that
the application would send more Tx data during the
connection event, and keeping the connection event alive
will help improve overall throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add force Md bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data.
Fixes#27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the check that decides to close a connection event,
which was missing a check on MD bit being set for empty PDU
to be Tx-ed out.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimize the Tx PDU preparation, empty PDU only needs MD bit
to be modified, other fields be initialised only at power up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix premature connection event close due to the new Tx
buffers not being de-multiplexed and routed to connection's
Lower Link Layer context when they arrive while being
inside the connection's radio event.
Also, fix master prepare to demux and enqueue two Tx buffers
so that MD bit can be set correctly.
Relates to #27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ull_conn_tx_ack function as it no longer needs to
return the connection context back to caller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check that Ethernet header is in the first net_buf fragment.
This is very unlikely to happen as device driver is expected
to only deliver proper Ethernet frames to upper stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We run various TCP function from work queue. Make sure the
connection lock is taken before accessing the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Fixed stack being to small for joiner operations.
Enabled auto joining even in case of manual start.
Fixed attachement of SED on norfic radios.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds check for provisioning random values that are identical to our own,
and terminates the provisioning procedure.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
In bt_set_name we already get name length so let's use it in strncpy
Also fix warning with enable -Wstringop-truncation
Signed-off-by: Ilya Averyanov <a1ien.n3t@gmail.com>
The sync create and sync delete dit not have the correct
amount of mandatory and optional parameters set in the
SHELL_CMD_ARG declarations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync terminate callback did not set any entries in the
PA sync array to NULL, thus not allowing the shell to
reuse them in case that the sync was lost unexpectectly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of doing slow (non-fast) scan when syncing to
a PA, it will now do a fast scan, which drastically reduces the
time it takes to create the sync. The application may
still do explicit slow scan if wanted.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the application cancels the PA sync, it would update
the scan before clearing the BT_PER_ADV_SYNC_SYNCING flag
which cause the scan to always start again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of casting k_delayed_work directly to k_work, use the
k_work field name. This avoids warnings from Coverity and
allows the code to work even if the k_delayed_work fields are
re-ordered in the future.
Coverity-CID: 214346
Fixes#28659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the redundant PDU transmission when the new Tx PDU
buffer is enqueued after MD bit value of zero was
transmitted previously in a connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add dependency to UDP in DHCPv4 Kconfig option as UDP is needed
in DHPCv4 to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An execution path could reach a loop that dereferences a pointer in
conditions where the pointer is null. Add a check to the loop
condition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Bug description:
When in tcp_conn_unref(), in case one of the delayed works is already
submitted to sysworkq (after delay period), e.g. send_timer, the check
of k_delayed_work_remaining_get() prevents calling
k_delayed_work_cancel().
This leads to corrupting sysworkq when zeroing struct tcp* conn.
Note that the "next" pointer for the work queue is part of the struct
work (in _reserved field). Which is, in this case, a member of struct
tcp.
Scenario leading to the bug:
(1) net_tcp_connect() is called from a work in sysworkq
(2) net_tcp_connect() submits conn->send_timer to sysworkq
(3) while net_tcp_connect() is waiting on connect_sem, delay period
passes (z_timeout) and send_timer enters sysworkq work slist
(4) also, some other code (app) submits more works to queue, now pointed
by conn->send_timer in sysworkq work list
(5) connection fails (no answer to SYN), causing a call to
tcp_conn_unref()
(6) tcp_conn_unref() is calling tcp_send_queue_flush()
(7) checking k_delayed_work_remaining_get(&conn->send_timer) returns 0
due to delay period end, but send_timer is still in sysworkq work
slist (sysworkq thread still hasn't handled the work)
(8) BUG!: no call to k_delayed_work_cancel(&conn->send_timer)
(9) back in tcp_conn_unref(), a call to memset(conn, 0, sizeof(*conn))
zeroes conn->send_timer
(10) conn->send_timer is pointed to in sysworkq work slist, but is
zeroed, clearing pointer to following works submitted in stage (4)
(11) EFFECT! the works in stage (4) are never executed!!
NOTES:
* k_delayed_work_cancel(), handles both states:
(1) delayed work pends on timeout and
(2) work already in queue.
So there is no need to check k_delayed_work_remaining_get()
* This is also relevant for conn->send_data_timer
Solution:
removing checks of k_delayed_work_remaining_get(), always calling
k_delayed_work_cancel() for work in struct tcp, in unref, before memset
Signed-off-by: David Komel <a8961713@gmail.com>
Instead of hardcoding the priority1 and priority2 values used
in BMCA, let the user tweak the values via Kconfig.
Fixes#28151
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix bt_le_oob_get_local and bt_le_ext_adv_oob_get_local stuck forever
waiting for the sc_local_pkey_ready semaphore when SC HCI commands
are not supported in the controller.
By using the le_sc_supported helper function the runtime check of HCI
commands and the feature check of CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
is combined to be handled int the same way.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the le_sc_supported helper function up in the source file so that
it can be re-used in other places without a forward declaration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since conn->send_data_total is of time size_t we need to use %zu or
we'll get build errors in sanitycheck on 64-bit platforms
Fixes#28605
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If hannel don't have alloc_buf and the RX MTU is configured to require
segmentation this warn the user and truncate the RX MTU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case where ull_adv::disable() is disallowed, disable_mark is
erroneously re-mark instead of un-marked
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If there is no handler for IPv4 broadcast packet, then ignore it
instead of trying to send an ARP message to resolve the senders
address.
Fixes#21016
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Accourding to the spec the CCC descriptor may occur in any position
within the characteristic definition after the Characteristic Value.
Fixes#28324
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix for handling REJECT_IND PDU received for PHY Update,
Connection Parameter Request and Data Length Update control
procedures.
If a link layer control procedure collision occurs, example
with local initiated PHY Update Procedure, and peer sends a
REJECT_IND PDU, then the PHY Update Procedure is stalled.
Fixes#28282.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According Mesh Profile Spec 5.4.2.4 Authentication, if device
use Input OOB Authentication method, should send input complete
pub after local public key has been acked.
`bt_mesh_input_string` or `bt_mesh_input_number` directly send
`input_complete`, however does not check whether the pub key has
been sent.
Mesh Provisioning timeout set to `60` seconds, so even this
probability is extremely low, it does not mean that there is no
such probability.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Fix bug in device name shortening handling leading to memory
corruption.
This is triggered by an underflow in the length field of the shortened
name when set_data_len + 2 > set_data_len_max.
Fixes: #27693
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Ignore error when failing to set the passive scanner private address.
This can happen because in between the time we checked if the
advertiser was enabled and the time we execute the set random address
command the state of the advertiser could have changed in the
controller, and we only set the state once the command has completed
in the controller.
Fixes: #25672
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix not setting NRPA before starting scanner.
Occurs with BT_PRIVACY=n and BT_EXT_ADV=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We need to have timer that closes the connection for good if
we do not get the FIN and ACK reponse from the peer.
If there is any pending data when application does close(),
send them before sending FIN.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is some error during connection creation, just bail
out in order to avoid null pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we try to send data but the sending window is full, then
try to kick the resend of the pending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The socket layer expects to receive -ENOBUFS if we do not have
any network buffers so cannot build a network message to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is an error, the net_context.c:context_sendto() will
free the net_pkt, so we must not do it here.
This commit fixes this error message:
<err> net_pkt: *** ERROR *** pkt 0x20421908 is freed already
(context_sendto():1672)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually the out-of-memory situation will clear itself eventually,
so if that happens in TCP, then keep the connection running and
let the user to decide what to do next.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of hardcoded value of 3, use the value from Kconfig file
so that user can tweak the TCP retry count.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use SYS_SLIST_FOR_EACH_CONTAINER_SAFE() macro when searching
the connection list so that we notice if new entries are added
or removed in the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing the slist node to be first in the tcp struct,
use the pointer to node when accessing the slist. This way we
can change the ordering of fields in tcp struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-structures the `bt_conn_recv()` to support more generic appending of
new ACL data. This also handles the possibility of receiving 0-length
ACL_START and ACL_CONT fragments, whilst maintaining existing
error-checking functionality.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fixes issue #26900.
A controller may fragment an L2CAP SDUs in any way it sees fit,
including fragmenting the L2CAP header. Likewise, the receiving
controller may send the fragmented header as ACL data to the host.
The Zephyr host assumed that a `BT_ACL_START` was at least 2 bytes long,
and consequently read the two-byte length field from the buffer without
length checks.
This commit allows the `BT_ACL_START` to be less than two bytes,
updating the `conn->rx_len` onces the `BT_ACL_CONT` with the remaining
part of the length field has been received.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fix Kconfig dependencies for enabling the controller PHY options
for LE 2M Phy and LE Coded Phy. These options should be selectable
without connections enabled when extended advertising has been enabled.
The issue affects out-of-tree controllers that wish to use the
BT_CTLR_PHY_CODED and BT_CTLR_PHY_2M options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Select the controller feature support for data length and LE 2M PHY
based on the SoC hardware capabilities instead of relying on SoC
family.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
osdp_build_ctx() was returning fixed NULL and the subsequent code did
not check if ctx was NULL due to osdp_build_ctx() failures. Fix both
these issues.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
When attempting to bind a channel if it fails the code will attempt to
cleanup calling bt_iso_cleanup which expects connections of
BT_CONN_TYPE_ISO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO connection does not initialize its tx_complete_work nor it uses for
anything so calling into tx_notify will likely cause a crash.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 770f232a67 removes an array
termination from the shell_make_argv function. This function was
called from two functions: execute and tab_handle. In the mentioned
commit termination was added only in the execute function.
As a result calling tab_handle function was causing a segmentation
fault. This fix adds array termination to the tab_handle function.
Fixes#28434
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Now that CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE defines a stack size, allow
for it to be configurable from a .conf file just like the rest of the
threads in Bluetooth.
Fixes#27768.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replaces the current zero length array for provisioner data with
ifdefs, to silence new gcc 10 warnings about array element access.
Fixes#28371.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Coverity spots that null pointer is passing to flash_img_buffered_write.
This patch fixes the problem.
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
The USB infrastructure currently uses the system work queue for
offloading transfers, CDC-ACM UART transmission/reception, and device
firmware activities. This causes problems when the system work queue
is also used to initiate some activities (such as UART) that normally
complete without requiring an external thread: in that case the USB
infrastructure is prevented from making progress because the system
work queue is blocked waiting for the USB infrastructure to provide
data.
Break the dependency by allowing the USB infrastructure to use a
dedicated work queue which doesn't depend on availability of the
system work queue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The z length modifier must be applied to avoid build errors when the
format is verified by the compiler on systems where size_t is larger
than int.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Both tx_irq_ena and rx_irq_ena flags shall be updated only
by using UART API. Those flags are used to let the device
start sending or receiving data. Changing those flags without
awareness of the user may lead to errors.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Usage of `pool_wait_sem` was incorrect. The semaphore shall be
dependent on context it was called for. In case of many CDC_ACM
devices one could possibly block others. This fixes an issue by
making semaphore a part of the internal CDC_ACM device structure.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Coverity spots that memory allocated for addr was leaking, but the
code was also leaking the socket file descriptor in the error path.
This patch fixes both problems.
Fixes#28172
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix the OpenThread initialization to prevent the IPv6 interface to
be enabled when `CONFIG_OPENTHREAD_RAW` is set.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
the adv instance should be delete correctly if advertise fail,
Otherwise the instance will unable to allocate if start the legacy again
Signed-off-by: chao an <anchao@xiaomi.com>
Closes: #28331
Configurable initialization priority is useful when using CDC ACM
serial device, for example.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
The unsigned size_t type variables have been checked for having
negative values.
Fixes#28171, Coverity-CID: 214224
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
CP/PD mode selection is the most frequently looked-for/changed key in
Kconfig. Making that as the first entry for ease of use.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
OSDP subsys was doing a `select SERIAL` in its Kconfig. But this has
other unintended side effects. Change this to
`imply SERIAL_SUPPORT_INTERRUPT`.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Shell was accepting CONFIG_SHELL_ARGC_MAX+1 arguments which lead to
memory corruption and fault. Added error message reported when number
of provided arguments exceeds CONFIG_SHELL_ARGC_MAX.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes a memory leak when a virtual address subscription is added for a
model that either has this VA already, or the model has no more space
for subscription addresses.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Because the previous commit fixed the destination address check,
we need to handle msghdr (used by sendmsg()) in CAN socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to specifically check CAN sockets here. This also means
that SocketCAN will need to support sendmsg() call too. This will
come in following commit.
Fixes#28229
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add back call to LE Write Suggested Default Data Length
command so that new connections, receiving Data Length
Update procedure before local device can auto initiate, can
respond with the suggested default data length Tx octets
and Tx time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When controller is built with extended advertising support but without
LL Privacy build fails due to issue with code that sets TxAdd in aux
PDU:
.../ll_sw/ull_adv_aux.c: In function 'ull_adv_aux_hdr_set_clear':
.../ll_sw/ull_adv_aux.c:502:25: error: 'struct ll_adv_set' has no
member named 'own_addr_type'
502 | sec_pdu->tx_addr = adv->own_addr_type & 0x1;
|
We need own_addr_type value if an advertising set with aux but without
AD is created since we cannot get TxAdd value from other PDU.
ull_adv_aux_hdr_set_clear() can now be called with a flag to explicitly
set AdvA field and pass own_addr_type in 'value' parameter. This allows
to set proper TxAdd when creating new advertising set.
On aux updates, we use TxAdd from other PDU:
- if primary PDU has AdvA, we use TxAdd from that PDU
- if previous secundary PDU has AdvA, we use TxAdd from that PDU
In other case we just return an unpsecified error since this should not
happen in any valid scenario.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When try to enable CONFIG_DEVICE_POWER_MANAGEMENT for a board,
the #error directive in subsys/power/device.c requires that
"MAX_PM_DEVICE" and "core_devices[]" must be defined exactly in that
file, or a compile error will come up.
For flexibility, this patch move "PM_MAX_DEVICE" to Kconfig and define
a weak version of "z_mp_core_devices[]", so any board or SOC can define
these varibles in their own module.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
The timeout variable in `dtls_rx()` was initialized improperly.
Coverity ID: 214219
Fixes#28161
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The default string representing Sensor Type resource in Generic IPSO
object would not fit into the predefined buffer. Increase the buffer
size and add extra BUILD_ASSERT to detect this situation.
Coverity ID: 214225
Fixes#28164
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
is_ep_valid() function was incorrectly searching through
all used endpoints. All endpoints for class must be checked
if they match requested endpoint.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Added a Kconfig option to enable scanner with unreserved
scan window when in continuous scan mode. This will permit
scanner to be always pre-empted by other roles, making it
the lowest in priority when it comes to using the radio.
Fixes#27414.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
