Refactor out clock ppm interface so that it can be reused
for Periodic Advertising Sync feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds a Kconfig option for enabling post-mortem mode of SystemView.
This is useful for crashes that occur after a longer period of time.
Signed-off-by: Mattia Fiumara <mattia.fiumara@bgrid.com>
Simple change that makes fs_seek and fs_tell return -ENOTSUP when
file system does not implement the seek/tell.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Don't use the ATT structs that has contains only a flexible array
member. This is not supported by C99 standard, only through GNU C
extension with zero length array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With only single RX buffer there is a high chance that such buffer will
not be processed before new bytes come in over UART. This is why it is
good to have at least two buffers, one which can be processed by SMP
layer, while another is being filled with new incoming bytes.
Add Kconfig option which allows to configure multiple buffers filled
with received UART SMP fragments. Use default value of 2, so we can
safely process already received frame in thread, while new fragment
comes in concurrently.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was a simple char array used as buffer, with additional
variable representing number of bytes already written into it. After
full frame was written, a boolean flag was simply set to notify thread
about being ready to be processed. There was however no mechanism
implemented to prevent new incoming bytes from overwriting such buffer
before (or during) being processed.
Use net_buf to store temporary frame. Define dedicated net_buf_pool,
from which such buffer will be allocated and freed after being
processed. This will prevent from reusing the same buffer before having
it fully processed (and returning once again to available buffer pool)
in shell thread.
Define also fifo that will store buffers that are ready to be
processed. This will be the mechanism for notifying thread about new
UART SMP fragments.
net_buf pool and k_fifo are used on purpose, keeping in mind their
additional overhead (mostly in RAM/ROM usage). This makes the code ready
for increasing number of buffers if needed. In this commit however we
stick with only 1 buffer, to keep minimal changes in processing flow.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix implicit declaration warning for peripheral_latency_cancel
by moving it to ull_slave file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
So far, `LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event was
reported before the final ACK for the Bootstrap Finish was sent from the
client side. This could cause delays in the ACK sending, in case the
application wanted for instance to store the received data in flash.
Fix this, by reporting the
`LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event on the next
state tansition (before the actual registration starts).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"Public Key or Identity" resource is of opaque data type, therefore it's
not correct to assume it will be a NULL terminated string (the existing
servers, for instance Leshan, does not include NULL terminator). Use the
actual size associated with the resource instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the resource instance structure kept only the information about
the buffer length provided to the resource (in the `data_len` field).
While this approach might be enough for integer resources, where the
actual data size is fixed, it did not work for opaque resources. It is
impossible to determine the actual opaque resource length after it's
been written into.
Fix this, by replacing the current `data_len` field of the
`lwm2m_engine_res_inst` with `max_data_len`, indicating the buffer
size, and making the `data_len` field to hold the actual data size of
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the LwM2M state machine started in the `ENGINE_INIT` state,
which made it exectue the registration/bootstrap registration even when
`lwm2m_rd_client_start()` was not called. With a new `ENGINE_IDLE`
state, the state machine can wait for the application to actually start
the client before proceeding. It also makes sense to stay in the
ENGINE_IDLE state after successfull deregistration, until the
application restarts the client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Without removing the stale address obtained during IPCP, it will still
be present the next time we do IPCP, marked as "in use" by the network
stack even if it is stale. This turned out to be a showstopper for
restarting the PPP stack on devices without static IP.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The BT code uses co-op thread priorities to implement some
critical sections. This won't work with SMP turned on.
Express this in our configuration ontology, so that it's
not possible for the end user to set up the system in this
way and get crashes or odd behavior.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This emulator supports enable functionality to start up the device and
read a few samples. It connects itself to any BMI160 device it finds in
the device tree. The SPI emulation controller driver is used to direct
SPI messages from the BMI160 driver to the BMI160 emulator.
Add a few more definitions to the header file, as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a log message to indicate that a new emulator is attached. Also add
a message in the assert to make it clearer what has gone wrong.
Signed-off-by: Simon Glass <sjg@chromium.org>
This commit fixes PUSH FOTA when opaque content-format is used.
This consists of the following fixes:
* Moved `struct block_context` to a private header, so that it can be a
part of `struct lwm2m_input_context`. This allows content decoders to
make use of the block context data.
* Removed faulty `get_length_left` function from the plain text
decoder, and replace it with coap_packet_get_payload() to obtain the
actual payload size.
* Introduce `struct lwm2m_opaque_context` as a part of block context,
which allows to keep track of opaque data download progress.
* Simplify `lwm2m_write_handler_opaque()` function. It will now only
make calls to `engine_get_opaque` - it's the decoder responsibility
to update the opaque context according to it's content format (for
instance TLV decoder should only update it with the actual opaque
data size, not the whole TLV).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added a check for adv->lll.aux before starting extended advertising to
fix observed NULL pointer dereference when updating AD data of legacy
advertising.
Fixes#28544.
Signed-off-by: Jordan Montgomery <montytyper@msn.com>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid warning about uninitialized variable.
The for loop should do at least two iterations
in a valid execution, hence initialize to an
error value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The second argument of this foonction is a bool, so passing 0 and 1
is incorrect.
Coccinelle script:
@@
expression e;
@@
flash_write_protection_set(e,
(
- 0
+ false
|
- 1
+ true
)
)
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
To get a list of all supported shell commands user must hit the TAB
button. It may be awkward on some terminal emulators. This change
enhances the help command in a way it will in addition print all
supported commands.
Fixes: #28785
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Functions shell_help_subcmd_print and shell_help_cmd_print
are more generic. Now they can operate on command passed as an
argument not hard coded active_cmd.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Generates a warning message when building with
CONFIG_TEST_RANDOM_GENERATOR. The purpose is inform that this is not
secure and should not used in production.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The scan callbacks may be NULL, which would cause an error if
e.g. the timeout callback wasn't set and the scan terminates after
a timeout.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using zephyr's internals zsock_ calls make mqtt library more compatible,
now it does not depend on NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No real need to assert when the send timer is cancelled. Just
check if there is re-transmission going on and do nothing if
there is not.
Fixes#28758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local and accepted socket was not bound which caused the
local address to be set as NULL. This then caused issues when
zsock_getsockname() was called by the application.
Fixes#28735
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix conditional compilation to allow building test shell
with Periodic Advertising Sync alone.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
