Added a OpCode definition that can be used to change the Page
timeout value.
Change-Id: I6ec06f6114f75665b161206ef3ebabbab193b04f
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
This adds the Read Remote Version Info Complete event,
used in both BR/EDR and LE and required by the LE Controller.
Change-Id: I650411ef2c582c20a90eb73bc4475b5e2d4aa2d9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds the Authenticated Payload Timeout expired event,
used in both BR/EDR and LE and required by the LE Controller.
Change-Id: Ifbbccea6d44a7d432734090e56cbf4e7189362b0
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The advertising report (standard or direct) events require
a number of reports field that is used by the controller
to fill in the structure.
At the same time this fixes the subevent code of the direct
advertising report structure.
Change-Id: I0fdb9b1dcad03615ac9b3f1f38fdfbe9ab3f9c3a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BT_HCI_OP_LE_CONN_PARAM_REQ_REPLY and
BT_HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY command complete events contain
a connection handle that serves to match the command with their
corresponding command complete event when there's more than one
pending. For now this just adds the structure definitions required,
and later on code will need to be added to handle possible mismatches.
Change-Id: I4585888b32ec995b18847c2a6ed488a2da9c8520
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BT_HCI_OP_LE_LTK_REQ_REPLY and BT_HCI_OP_LE_LTK_REQ_NEG_REPLY
command complete events contain a connection handle that serves to
match the command with their corresponding command complete event
when there's more than one pending. For now this just adds the
structure definitions required, and later on code will need to
be added to handle possible mismatches.
Change-Id: I37e88070bc0d4d1b80f085f7e162c30715a82103
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The length of the commands array in the return parameters of
the HCI Read Local Supported Commands event is 64 bytes
according to the spec. This was mistakenly set as 36 bytes due
to the fact that only 36 out of the 64 bytes currently contain
meaningful data. The actual array as received from the driver
will always be 64 bytes however, and is therefore sized
accordingly.
Change-Id: Iee7f1fc18045dff96efcc808fd81661eced37b03
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To fully support BT Spec. v4.2 LE Topology use LE read supported
states HCI command to find the supported states in the
controller.
Change-id: I6b4cf4cbefdff44e51bb0a4242e0aef3755f43db
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
In preparation for the unification of the code in:
drivers/bluetooth/controller/hci
with the existing HCI definitions in Zephyr,
this change addresses both the required usage of spaces
in the alignment of line components that require matching
the alignment of other adjacent lines and also adds all
missing Bluetooth 4.2 LE commands and events so that the
controller code can make use of them.
Jira: ZEP-726
Change-Id: Iabcee6898a09ddaf4479cfe4ecb0eedc194da8a3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The lmp_*_capable() macros were neither following the appropriate name
space (BT_*) nor the appropriate style (macros should be upper-case).
Introduce a new BT_FEAT_TEST() macro which gives a clearer mapping to
the feature tables found in the core specification. Each specific
feature test macro is now also named with the appropriate BT_FEAT_*
prefix.
Change-Id: Ia6b18b066927908f9bda646e737e63d46a1d17df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make is possible to use lmp_ext_feat_capable() both for local as well
as remote features.
Change-Id: I05bb6a25303c0dd2f5e0bbc4f7f412210f668aa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Read Local Extended Features command to read local features and
extended local features on init.
Change-Id: I4c8594783895f439af36214881aeff24e116e783
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds support for setting default BR/EDR name on init. For now
this is just static configuration but can be extended later on
to allow runtime configuration if requested.
< HCI Command: Write Local Name (0x03|0x0013) plen 248
Name: Zephyr
> HCI Event: Command Complete (0x0e) plen 4
Write Local Name (0x03|0x0013) ncmd 1
Status: Success (0x00)
Change-Id: I59ecfc2be8e55c6f90cdb0f12c6fed7f7ce976f8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Enables L2CAP protocol definitions for connection request/response and
use it then to start handle incoming PSM connection request to valid
registered local PSM server. SDP PSM got no security restrictions.
The other PSM connections are validated against link encryption and
availability of SSP feature and if not matched are refused with
security error.
Change-Id: I429cf5dbce92300bd52639d5065e0144f8db4d13
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Introduces HCI protocol defines to be able request and read remote LMP
features and if available extended data from peer when connected.
Change-Id: Ic274737d8b6c896eb9e83e2179829bcbadf6f635
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The shorter form "param" is used elsewhere and this helps avoid overly
long lines.
Change-Id: Ie76497b5bf30e72099d13a26db9cacb8cd2c9c79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
These are needed both by nble as well as the HCI stack and will likely
also be of use for applications.
Change-Id: Ifd10ae6df25151162d9d5491466324b4a42f5506
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds all valid link keys types available during legacy and SSP
authentication.
Change-Id: I42f2aba0122d33a984bd84c56b7a6a290f5e9e1d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables getting by host connection complete event and handle
internal state of related to the event connection object.
Change-Id: Ie6252ff33cc2e1fff5a4ce746fda7c3a59bf8aab
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
