Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
SYS_GET_DEVICE() needs the name set in DECLARE_DEVICE_INIT_CONFIG() not
the one in IRQ_CONNECT_STATIC().
Change-Id: Id1ed66953c863531411b34594ffed669ad524ef5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That fixes a build error. Platfom's board.h have to provide such flags
if they enable dw gpio 1 controller.
Take the opportunity to provide the right isr to IRQ_CONNECT_STATIC.
Change-Id: I16900ea04f7f7c5d3c99b93a92b00c1f651494de
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds the register definition for the DW GPIO hardware block.
This set of registers and offsets are specific for the SS
GPIO hardware block in the Quark SE platform.
In particular, the register BOTHEDGE (offset 0x68 in the
main GPIO block) does not exist on the SS GPIO block.
Change-Id: I4e16ec7c8e89015be1fc8bcdb1b7fa5377890b9d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
A tiny fix where the pin is the bit position, not its mask.
Change-Id: I4ed8c4b2968ff28b407cab88903351bafe6501ba
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch updates the ISR initialization code to reflect recent
changes in the underlying Zephyr ISR infrastructure. It also adds
assertions to detect failures to lookup device bindings during
initialization.
Change-Id: I4bf1955da44a97f8c2652b96a390804c5cea73e3
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
use gpio_dw instead of gpio_<function>_dw to be consistent in the
driver itself and with other drivers.
Change-Id: Ifb0e50c230f142197eb4b01c1bb4ce1c16e4753f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We now have BIT defined in a header file globally, so lets use it.
Change-Id: Ie7b87478cb5a9e977ec045efa072d28fab86e78b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allows to remove the both edges support from the DW GPIO driver.
Change-Id: I9e39cca320aeac5d10aafe7a83641917ad004fe6
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This patch corrects gpio_dw_setup to use the MMIO base address
determined by PCI enumeration when that enumeration feature is enabled
instead of always using the default base address specified at compile
time.
Change-Id: If139c40ce30275694e01196a4a4aa529cd714f06
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The naming convention used in the source is for there to be an
_ and not a - in the file. Fixing GPIO to be consistent with
the os naming conventions.
Change-Id: Ifc4356c14b52e2cc2411a7445b44c7cb57d2765c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
