Earlier tests were not going through ICMP echo
core stack handlers. Due to that unable to verify
echo reply. Tests are improved to verify replies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using MQTT_UTF8_LITERAL() allows to reduce code and make it less error
prone, since utf8 length is calculated automatically by the macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add a simple test to verify that the bind() can be called multiple
times if AF_PACKET is set and there are multiple network interfaces
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test case for IPv4 header options was added but
CONFIG_NET_IPV4_HDR_OPTIONS option was not enabled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added simple test case for net_pkt_clone() to verify
cursor position after cloning.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's no longer needed to call `mqtt_input` after `mqtt_disconnect`.
Doing this will actually return an error as the MQTT connection is no
longer active after calling `mqtt_disconnect`.
Fixes#22360
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The reworked 6lowpan implementation asserts when no LL source or
destination address is set on a packet. This caused the fragmentation
tests to fail before they completed.
Fix the issue, by setting a dummy address on a packet during a setup.
Fixes#19761
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
NET_INIT_PRIO (defined in subsys/net/ip/Kconfig) is currently hardcoded
to 90 (it's not set via any Kconfig.defconfig files either). Maybe it
could be given a prompt or be removed, but just remove the assignment
for now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is already enabled indirectly through being selected by
NET_L2_IEEE802154_RFD, which is enabled in the configuration file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
(There doesn't seem to be any way to enable this symbol, because it's
not being select'ed either.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf.
Asserts are:
- Pulling from net buf before any data has been added.
- Pulling more data than has been allocated for the buf.
Fix warning:
W: You have 1 IPv4 net_if addresses but 2 network interfaces
W: Consider increasing CONFIG_NET_IF_MAX_IPV4_COUNT value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix byteorder test writing past the data pointer. This would otherwise
have been caught by the assert, but net buf asserts were not enabled in
the test. Reset the buffer between different tests to re-use the same
16-byte buffer.
Turning on asserts gives:
starting test - net_buf_test_byte_order
ASSERTION FAIL [net_buf_simple_tailroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:775
E: r0/a1: 0x00000004 r1/a2: 0x00000307 r2/a3: 0x00000000
E: r3/a4: 0x00006d79 r12/ip: 0x00000000 r14/lr: 0x000028ad
E: xpsr: 0x61000000
E: Faulting instruction address (r15/pc): 0x000050b0
E: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf when adding
more data than has been allocated for the buf.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Also remove the assignments to the other NET_GPTP_CLOCK_ACCURACY_*
symbols. They are all in the same choice (in
subsys/net/l2/ethernet/gptp/Kconfig), meaning only one of them can be
enabled, and the choice already defaults to
NET_GPTP_CLOCK_ACCURACY_UNKNOWN, which is the symbol assigned last.
The symbol assigned last becomes the choice selection when multiple
symbols in a choice are assigned to. The other choice symbols still
become n. Dependencies override assignments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code tried to use the allocated pkt ptr before checking for
NULL value.
Fixes#21699
Coverity-CID: 206608
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test name did not reflect the purpose of the test.
Also add "poll" tag so that we can more easily launch just
this test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds tests for reading and writing 16, 24, 32, 48 and 64 bits in
different byte orders.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix unintended sign extension (SIGN_EXTENSION).
The result of "coap_block_size_to_bytes() * (iter - 1)"
extending the sign type.
Issue is the conversion of iter from u8_t to int because it's
an unsigned operand in an binary subtraction with 1 which is
a signed operand with higher conversion rank (int).
Fixes#20880Fixes#20881Fixes#20882Fixes#20883
Coverity CID :205780
Coverity CID :205786
Coverity CID :205806
Coverity CID :205808
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stack size might be too small when running the test in real
board like sam-e70.
Fixes#19914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test creates two network interfaces, but does not set MAC
address of one of them correctly (MAC address is all zeros).
This is not good and the issue fixed in commit 9468cb6eb1
could have been revealed earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replaced net_bytes_from_str in hostname_get test by a new function that
converts the unique part of the hostname in a byte array.
net_bytes_from_str can not be used as it assumes that the string input
is of the format "xx:xx:xx:xx:xx:xx" where as the unique part of the
hostname is a MAC address string without colons. If net_bytes_from_str
is used this could result in buffer overrun on the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
