Issue noticed with following scenario.
1) TCP server is listening for connections but will handle
only one connection at a time (e.g. echo-server sample)
2) Client A connects, and the connection is accepted.
3) Client B connects, instead of denying a connection,
it is "auto" accepted (this is the actual bug) even
if the application has not called accept().
4) After the connection A is closed, the connection B
gets accepted by application but now the closed
connection A will cause confusion in the net-stack
5) This confusion can cause memory leak or double free
in the TCP core.
It is not easy to trigger this issue because it depends
on timing of the connections A & B.
Fixes: #18308
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we are closing connection before the connection was established,
then unref the context so that the cleanup is done properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Host shall ignore the unknown ATT PDU that has Command Flag set.
Fixes regression introduced in 3b271b8455.
Fixes: GATT/SR/UNS/BI-02-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit adds an explicit inclusion of toolchain.h from
ieee802154_frame.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by
ieee802154_frame.h; these being not defined can easily go unnoticed and
cause unexpected behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds an explicit inclusion of toolchain.h from pdu.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by pdu.h;
these being not defined can easily go unnoticed and cause unexpected
behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The bt_mesh_fixed_group_match() function is intended to match the
various well-known group addresses, however it was never updated when
Proxy support was added.
Fixes#19015
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As element addresses are sequential, there's no need for iterating
through the elements to find the one matching a unicast address.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This has been subsumed by the new implementation in drivers/pcie.
We remove the legacy subsystem, related tests, shell module, and
outdated documentation/config references.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When using offloaded network, an L2 is never assigned to the net_if.
Only certain portions of the net_if code are referenced such as:
net_if_up()
net_if_down()
And these functions make use of several L2 references:
get_flags()
enable()
Let's add checks to make sure we don't deref a NULL when using these
functions.
Fixes the following exception on K64F and other HW which can make
use of offloaded network HW:
FATAL: ***** Reserved Exception ( -16) *****
FATAL: r0/a1: 0x00000010 r1/a2: 0x0000644f r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x2000474c r14/lr: 0x0001475b
FATAL: xpsr: 0x00000000
FATAL: Faulting instruction address (r15/pc): 0x0001b1cd
FATAL: >>> ZEPHYR FATAL ERROR 0: CPU exception
FATAL: Current thread: 0x20004c4c (unknown)
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18957
Signed-off-by: Michael Scott <mike@foundries.io>
ZLP flag should only be set if less data is sent
than requested by host and the length is a multiple
of wMaxPacketSize. Current implementation does not
check it correctly.
For some platforms like nRF52, this patch will not
be enough to fix the problem. The driver must be informed
about the transfer type before sending the last packet,
without changing the API, it is not possible.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Don't send zlp immediately after last packet for EP0.
Wait for write done event (in) before sending zlp.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Set limited amount of tries to write to USB control endpoint EP0.
Fixes#16223
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch add tty runtime initialization check for console support
routines. Without it callers of routines API are not aware that
initialization of tty was failed. This patch basically checks
availability of console device and also its support for
interrupt driven transfers if routines are configured to use it.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In setup messages addressing classes, USB standard defines that wIndex
constains interface number encoded in bits 0..7. Bits 8..15
are reserved and normally set to 0. However, in Audio Class they contain
entity number. Hence the need to filter 8 bits for getting interface
number.
Signed-off-by: Bartosz Sokolski <bartosz.sokolski@nordicsemi.no>
Corrected the amount of bytes copied for port handling in parse_ipv6
to prevent reading past the boundaries of the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the inclusion of the littefs Kconfig options inside the
'if FILESYSTEM' block so we don't leak Kconfig symbols if FILESYSTEM
support isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add iterator function to iterate over all connection objects.
Make type a bitmap so that it can be used as a bitmask to select which
conns to receive foreach callback.
Use foreach function internally where possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allows the user to pass a provisioning input complete callback to the
provisioning module, letting the application stop displaying its output
OOB value when the other party finishes their OOB input.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Made BT_HCI_TX_STACK_SIZE configurable and added BT_HCI_ECC_STACK_SIZE.
These changes are necessary to allow vendors to adjust for other
achitectures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework the BT_ASSERT infrastructure with the following changes:
- Transition from LOG() macros to printk()
- Allow the BT_ASSERT() macro to map directly to stancard __ASSERT()
- Allow printing of the assert reason to be disabled
- Switch from k_oops() to k_panic() configurable
There are 2 reasons for using printk() instead of LOG():
- BT_ERR uses deferred logging by default, which is problematic with
ASSERTs
- The __ASSERT() macro in Zephyr uses printk()
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix issue when checking if SMP pairing procedure is allowed to use the
SMP debug keys. This check did not consider the case where the keys
pointer was assigned, but did not contain a valid LTK key.
This resulted in being unable to pair with debug keys without an
existing bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix shell build dependencies, subsys/bluetooth/controller is only added
for CONFIG_BT_LL_SW_SPLIT or CONFIG_BT_LL_SW_LEGACY.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The return code of set_random_address is not always handled. This could
lead to connection using the wrong Identity address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enabled TEST_USERSPACE_WITHOUT_HW_STACK_PROTECTION
Kconfig option by default for ke1xf SoC Series, which instructs
the build to disable HW stack protection from tests that are to
run with User Mode enabled. This is done because this platform
does not have a sufficient number of MPU regions to support HW
stack protection (Stack Guards) and User Mode simultaneously.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces a new Kconfig option in the testsuite
sub-system, which allows us to disable HW stack protection from
tests that run with user mode enabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
