The nrf52 bsim hw models now require some of these to
be defined. For this case we cannot implement these
as static inline functions as that would redefinitions
of the functions.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Select the controller feature support for data length and LE 2M PHY
based on the SoC hardware capabilities instead of relying on SoC
family.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update the driver implementation to use nrfx_clock and nrfx_power
drivers. Update also revisions of the hal_nordic and nrf_hw_models
modules, so that it is actually possible to use those drivers.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Implement stubs for ARM CMSIS intrinsics,
to be used locally for nrf52_bsim builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Provide a very simple model of the DSB ARM
instruction as no-operation. The implementation
is provided in a cmsis.h header file added
in the nrf52_bsim board directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The SoC node has compatibles for the specific SoC in place, having the
same compatible at the top level is technically a conflict and the
top-level one should really just be about the board. Remove the SoC
related compatibles at the top-level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return value of the interrupt is never used, so remove the
functionality from the API. We ripple this change into the
ARCH_IRQ_CONNECT and ARCH_IRQ_DIRECT_CONNECT implementations. With
this change we can also remove the compound expression as that is
not needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of using Kconfig options for setting the device name and IRQ
priority for the entropy_nrf5 driver, get these settings from the rng
node defined in DTS for a given SoC.
Provide also fixups for CONFIG_ENTROPY_NAME, until applications using
entropy drivers are converted to use DTS as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove DT_ defines in board_soc.h now that we have a device tree. We
remove all devices from the device tree that aren't known to be part
of the NRF52 BSIM simulation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These headers were here only because some drivers were
using them directly.
But they are not needed anymore, so remove them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fetch HW models from a new west module.
And, remove all pre-west glue which was used to:
* Fetch them in CI
* Validate their vesion
* Modify the include path and link to them
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some people are behind firewalls that prevent them
from doing ssh connections.
Change the default BabbleSim fetching instructions to
be over https which should work for everybody.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update the models revision used for building so that nrf52_bsim
can be used with nrfx 2.0.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When calling posix_print_error_and_exit()
a return != 0 was not provided to the shell
This was due to thee way the tracing functions call back
into the main app exit function, assuming that callback
will return.
But in the SOC_INF boards, that function does
not return, and the tracing functions never have the
chance to exit(!=0)
Fix it by calling posix_exit() in the wrap function instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
posix_soc_if.h is meant to be a private header between
the POSIX ARCH, SOC, and maybe boards,
it should not contain definitions meant to be used directly
by the kernel or app.
Some definitions were placed here due to a dependency moebius
loop.
Unravel that by removing all header dependencies in posix_soc_if.h,
move those definitions out to a more logical place,
and while we are here reduce the amount of users of
irq_offload.h in POSIX arch related code
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The POSIX ARCH delegates some of the tasks which normally
are taken care of by the ARCH to the SOC or BOARD levels.
To avoid changes in the kernel-arch IF propagating into
the arch-soc and arch-board interfaces (which would break
off-tree posix boards) isolate them.
Also move arch inlined functions into the arch.h header,
and out from the headers which specify the posix arch-soc
and arch-board interfaces.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The specification for these arch APIs is to have them inline,
and the bodies were just oneliners calling another function
anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The incomming new NRF clock driver requires extra nrf HAL
and drivers functions, which are only supported in the HW models
after version 1.8
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver makes use of the nRF RNG peripheral, so it can be used only
for SoCs that are equipped with one, and not all nRF SoCs are.
The option enabling the driver should then depend on `HAS_HW_NRF_RNG`,
which indicates the presence of this peripheral in a given SoC.
This patch removes also entries disabling this driver in default
configurations for nRF9160 SoC, as these were needed only because
of the invalid dependency of the ENTROPY_NRF5_RNG option.
A minor adjustment of Kconfig files of the nrf52_bsim board was
required as well, so that this board's configuration can properly
handle this corrected dependency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
(This could not be triggered in the nrf52_bsim yet,
so just so it is fixed for the future)
Properly handle converting back and forth from absolute to HW
time when either of those is set to TIME_NEVER
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Clarify a little bit how to fetch and compile Babblesim.
So users will not need to have repo installed,
and to guide them to add the variables to their shell init
script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow NRF drivers to include nrfx HAL or drivers headers
like with the real HAL, include the top nrfx/ folder
just as the real nrfx does.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
