Remove the MEM_POOL_HEAP_BACKEND kconfig, treating it as true always.
Now the legacy mem_pool cannot be enabled and all usage uses the
k_heap/sys_heap backend.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Defines partitions that can be used by mcuboot on nucleo_h743zi board.
Please note that mcuboot is not yet supported on stm32 h7 family as the
write-block-size is greater than 8.
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Set rom offset to 0x400 if application is compiled with
CONFIG_BOOTLOADER_MCUBOOT.
Please note that mcuboot is not yet supported on stm32h7 devices
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Fixes#29831: Implements flash driver for stm32h7 devices.
The driver is independant from the other stm32 families (flash_stm32.c),
only the header interface is (mainly) common.
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Define write and erase block size for supported stm32h7 devices
Use a specific compatible string for stm32h7 devices for the flash
driver
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
This commit brings changes in nRF IEEE 802.15.4 radio driver's
handling of front-end modules.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Do not include every single Kconfig file as part of this area, Kconfigs
in different areas are maintained by the repective component
maintainers.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Status is now orphaned.
- There has been a bit of activity in this area over the last
few months and I'm sure one or more of these new stake holders
would make a fine maintainer.
Signed-off-by: Michael Scott <mike@foundries.io>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
nsim_hs_smp has 2 cores, and CONFIG_MP_NUM_CPUS defalut value is 2.
But some tests will have extra config: CONFIG_MP_NUM_CPUS=1, so we
need to launch cores according CONFIG_MP_NUM_CPUS, not using a fix
number 2.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Instrs_per_pass option specify the number of instructions excuted
before simulator switches operations. the default value is 512. If we
specify a small value for it the debugger's overhead will increase
significantly for simulation because of the time taken to rapidly
switch operations. And the overhead will cause some time critical
task failure.
Restore instrs_per_pass value from 10 to default 512, we will have a
good sanitycheck result for nsim_hs_smp.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The SAM4E/S SoC have a ROM bootloader named SAM-BA. Add bossac
to the board west runner list. This requires Zephyr SDK 0.12.0.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some Clocks have ifdefs only for clock_control_on but are missing
them for clock_control_off.
Additionally return ahb_clock clock frequency for stm32g0
STM32_CLOCK_BUS_IOP in stm32_clock_control_get_subsys_rate.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Commit: 11de84a6b4 moved shell core
tests from tests/shell to tests/subsys/shell. Remove obsolete path
from MAINTAINERS.yml accordingly.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When CONFIG_BT_CTLR_CONN_META is enabled and the ticker "must_expire"
feature is used, collisions may cause incorrect decrement of the
supervision_expire counter, resulting in a too early link supervision
timeout.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The commit removes a leftover configuration of the log management that
has never worked and has been removed with the commit
0bb466c34e4fe863733a929baa8f51981263ce3d to apache/mynewt-mcumgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
After the change SHA1: 3498d43784 the
local-mac-address property is no longer parsed correctly when it is
defined in the '&enet` DTS node on k6x SoCs (e.g. frdm_k64f and
ip_k66f).
The problem is with value to which the
NODE_HAS_VALID_MAC_ADDR(DT_DRV_INST(n)) macro is resolved.
If the 'local-mac-address' is present it returns
'(!((0 == 0) && (0 == 0) && (18 == 0) && (19 == 0) && (0 == 0) && \
(16 == 0)))' [*], otherwise it is 0.
As COND_CODE_{01} only accepts 0 or 1 as its first argument, it all
worked until the 'local-mac-address' was not defined. When present
the first argument to COND_CODE_{01} macro was [*] and it caused
build break.
Fixes issue: #30354https://github.com/zephyrproject-rtos/zephyr/issues/30354
Signed-off-by: Lukasz Majewski <lukma@denx.de>
If interrupt handler contains while loop which depends on
uart_irq_tx_ready() and uart_fifo_fill is called inside this
loop then if TXSTOPPED event occurs while code executes the
loop then uart_irq_tx_ready() will return true but uart_fifo_fill
will fail to write any bytes. That is because fifo_fill_lock is
cleared in handling of TXSTOPPED. To solve that added clearing
the lock inside uart_irq_tx_ready() if STOPPED event is detected
there.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Set work item's flag in pending state, it cannot be append to a
workqueue. Improve branch coverage of function k_work_submit_to_queue().
Signed-off-by: Ying ming <mingx.ying@intel.com>
Fix incorrect initiator window offset used when in continous
initiator scanning. Calculated window offset to free time
space after existing central connections is not decremented
correctly when there is change in window at every initiator
scan interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix corruption of ftr auto-variable due to reuse to insert
new node rx into the received auxiliary PDU chain, which can
cause corrupt reference used later in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changed algorithm of checking for pending thread in mem_slab.
Check for pending thread now is done only if there is
no memory left.
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
There was a regression introduced when reordering function parameters
check. It is valid to pass NULL semaphore with zero timeout, so fix
parameter check to respect that.
Fixes: 67976f8686 ("drivers: modem: verify send semaphore before
taking any action")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This adds a sample application for testing
the LiteX clock control driver.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This enables the LiteX clock control driver for litex_vexriscv platform.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This commit adds LiteX SoC Builder clock control driver for MMCM
module. It gives ability to change frequency, phase and duty cycle
on up to 7 clock outputs.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds bindings for the LiteX clock control driver.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
SRAM base address and size are currently hardcoded in the defconfig.
This is wrong because symbols like KERNEL_RAM_SIZE and KERNEL_VM_BASE
are not currently being set. Fix this by adding the correct DTS entry.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
CONFIG_IWDG_STM32_TIMEOUT allowed values of 100 us for initial watchdog
timeout, which was actually rounded to zero in the driver, which uses
milliseconds resolution for timeouts. This resulted in the reload value
being set to maximum possible (calculation: 0U - 1).
This commit updates the calculation of timeout minimum and maximum
values considering the actual LSI frequency of the used MCU.
As the resolution of CONFIG_IWDG_STM32_TIMEOUT in microseconds doesn't
make sense if the driver supports only milliseconds, it is renamed to
IWDG_STM32_INITIAL_TIMEOUT (this prevents accidental wrong settings in
existing firmware) and the unit is changed to ms.
Signed-off-by: Martin Jäger <martin@libre.solar>
