With MMU features enabled, we are using 248 out of 256
available bytes on 32-bit. This is extremely uncomfortable, relax
to a larger value like several other arches.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Increase the number of workers for Dec as we've got additional credits
to utilize before the end of the year.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add LED blinking while scanning for Periodic Advertising,
and LED ON when Periodic Advertising Sync is established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added documentation in per_adv and per_sync samples on how
to test Periodic Advertising and Periodic Advertising
Synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scanning on Coded PHY, auxiliary PDUs on Coded
PHY where not received due to redundant conditional code
only applicable in connection role being copy-pasted during
the development of Extended Scanning feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use memmove to copy overlapping memory when populating the
Common Extended Advertising Header Format in the advertising
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix maximum PDU len configuration when advertising and/or
scanning on primary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add an application that initializes Bluetooth Subsystem,
creates an extended advertising set, and starts Periodic
Advertising functionality.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add helper defines for Extended Advertising parameters that
can be used while creating Extended Advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The message should only be returned if the requested pending/reply
pointer is not NULL. Otherwise it could get an incorrect match (for
instance if specific pending pointer is searched for and reply is NULL
the function could return any message that doesn't expect a reply (and
thus has its reply pointer set to NULL).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine by default sends piggybacked responses for requests after
all callbacks are executed. This approach however isn't good enough if
the application callback executes some lenghty operations (for instance
during FW update). Delaying the ACK may result in unnecessary
retransmissions.
This commits adds an API function which allows to send an early empty
ACK from the application callback. This prevents further retransmissions
from the server side. After all callbacks are executed, the LwM2M engine
will send the response as a separate CON message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The debugging section was generalized for flash and debugging tools.
The links were refactored accordly and all references were updated.
To be consistent, the directory doc/guides/debbugging was renamed to
doc/guides/flash_debug.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current bossac runner have multiple entries for flash offset
parameter. Remove offset parameter from command line and rework
all infraestructure to get offset from device tree. Add proper
verification routines to validate configurations on board and
device tree entries to fix SDK compatibility checks.
Fixes#29312.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add is_extended_samba_protocol method to verify if board is using SAM-BA
extended protocol (Arduino/Adafruit UF2). It allows enforce serial line
speed to 1200 baud automatically. This avoid add entries on board.cmake
file.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
I don't have much explanation for this change except that
I can't program soc on these boards with this option being set.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Similar to what was done for other h7 based boards,
use 'connect_assert_srst' and fix init routine.
Fixes#29732
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Resource sharing between m7 and m4 core was a bit abusive
as the whole SERIAL ports where disabled on m4 core.
Since it is possible to use a finer grain resource sharing and
having no serial node configured could lead to compilation issue
in some samples assign usart8 to m4 target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On these 3 stm32h7 based boards, 'connect_assert_srst' should
be used in order to be able to program after board unplug/plug.
Problem is that 'connect_assert_srst' prevents gdb-attach procedure
to complete which now requires 'reset halt' to be performed before
hand.
Fix this by forcing 'reset halt' by introducing a new init routine.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since this board is fully supported on openocd,
let's use openocd to comply with other boards and
remove the dependency on stm32cubeprogrammer.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32H753xx is similar to STM32H743xx except that it has crypto/hash
hardware acceleration and the memory configuration is always 2Mbytes
flash and 1Mbyte RAM.
Signed-off-by: Petri Oksanen <petri@iote.ai>
Update manifest for tf-m module to upgrade
trusted-firmware-m to v1.2.0 release from upstream.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With the distinction between zephyr_get_compile_options_for_lang() and
zephyr_get_compile_options_for_lang_as_string() regarding list handling
and thus quoting, then zephyr_get_compile_options_for_lang_as_string()
is now used for CMake source file properties for compilation of
kobject_hash.c source file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The use of zephyr_get_<flags>_for_lang_as_string will now use space as
delimiter, this will allow for existing used of the
zephyr_get_<flags>_for_lang_as_string() to return a string with spaces
instead of semicolons as a quoted list.
Note, in most situations it is prefered to have a proper CMake list
returned, in which case zephyr_get_<flags>_for_lang() is probably the
correct function to use.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The current zephyr_get_compile_<type> flags returns compile / include
flags based on generator expressions.
But they also included a space.
This have the unintended side-effect that when the properties are
fetched into another variable and later appended to lists in order to
finally be used in a CMake target function / custom command, then CMake
in some cases will quote the string, creating a quoted argument like:
"arg0 arg1 arg2: instead of individual arguments like: "arg0" "arg1"
"arg2".
By using $<SEMICOLON>, then arguments are seperated correctly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Extended nrf_rtc_timer driver to expose API for using RTC for
other purposes. System timer is using one compare channels,
other channels may be used through this API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This test fails on x86_64 qemu due to SMP. As Power Mgmt isn't really
supported on SMP currently limit this test to 1 CPU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change type of advertising set handle to 8 bit to comply with
Bluetooth Core spec. type.
Fixes wrong usage of adv. set handle variable in function
bt_le_per_adv_set_param.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove irq_lock around connection lookup, this is no longer needed
now that the lookup functions always have a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make the connection lookup functions thread-safe by re-using the
bt_conn_ref returning NULL mechanism and keeping a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make bt_conn_ref return NULL if the reference count has reached zero.
This makes it possible to re-use bt_conn_ref internally to re-use the
reference count mechanism to check if the reference is in use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
