This commit is about platform it8xxx2 gpio.
The devicetree use key and led as example.
Users can change it to meet their needs.
Signed-off-by: Cheryl Su <Cheryl.su@ite.com.tw>
Convert counter drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert led drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ps2 drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert espi drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
So far nRF's TIMER was used for generating PWM signal. Add support for
generating PWM based on RTC, which is sourced by 32KHz low frequency
crystal. This allows to use low frequency PWM with much lower power
consumption, because high frequency clock path can be disabled.
Don't support RTC clock prescaler, because maximum 512s period covers
most use cases. This allows to adjust pulse and period cycles to the
fact that CLEAR task event is generated always one LFCLK cycle after
period COMPARE value is reached.
Also update hal_nordic revision, as it contains updated check for PPI
channels conflict when RTC is used to generate PWM.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far 'timer-instance' DT property was the way to configure TIMER which
was used for generating PWM signal. Replace that by using 'generator'
phandle, so we get prepared for supporting RTC instances as PWM signal
generator.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is some kind of runtime clock scaling implemented when period
cycles exceed 16-bit value. This is broken, because configured PWM has
far higher frequency in that case. Replace that mechanism with simply
veryfying if requested PWM period does not exceed 16-bit value.
Suggested-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add a missing keyword in a variable declaration and correct the type
in a missed declaration. Also use a more appropriate upper bound in a
loop.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The dev_name field in DEVICE_AND_API_INIT() call should match the
driver's name. Tmp116 driver had a wrong dev_name field.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Use Nordic HAL to configure GPIO output. This adds support for P1 GPIOs,
when pin numbers above 31 are used.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using wncm14a2a modem driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using eswifi WiFi driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using winc1500 WiFi driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using ESP WiFi driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Flash controller support is not yet ready on M4 core.
Remove the chosen declaration to make it clear.
Additionally, generate a build error if this driver is compiled
on M4 core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes#29831: Implements flash driver for stm32h7 devices.
The driver is independant from the other stm32 families (flash_stm32.c),
only the header interface is (mainly) common.
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Add a new test for k_busy_wait and cpu_hold
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
In native_posix and nrf52_bsim add the cpu_hold() function,
which can be used to emulate the time it takes for code
to execute.
It is very similar to arch_busy_wait(), but while
arch_busy_wait() returns when the requested time has passed,
cpu_hold() ensures that the time passes in the callers
context independently of how much time may pass in some
other context.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When tickless mode was disable, sys clock timeout handler was calling
public API function for setting new compare value. Public API function
asserts when chan 0 is used which is reserved for system clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added clearing of CC event which may occure due to previous
CC value which was closed to current counter value.
Fixed int_mask initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Convert entropy drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes the fxas21002 sensor driver to provide gyro channel data in
radians/sec instead of degrees/sec.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix TIMER0 and RTC0 being selectable when using out-of-tree Bluetooth
controller.
Generalize the Kconfig to have the features that use the HW peripheral
select them as reserved to make the dependencies more manageable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert gpio drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put everything inside an if, we should not see anything related to
uart_mux in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The GIC interrupt controller driver is using a custom init function
called directly from the prep_c function. For consistency move that to
use SYS_INIT.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Convert watchdog drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The cc13xx_cc26xx driver uses "inst" so we need to use
DEVICE_DT_INST_DEFINE instead of DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The spi_nrfx_spis driver uses nodelabel so we need to use
DEVICE_DT_DEFINE instead of DEVICE_DT_INST_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
