A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The k_mem_pool allocator is no more, and the z_mem_pool compatibility
API is going away. The internal allocator should be a k_heap always.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The immediate logging option cannot be used with network logging
support CONFIG_LOG_BACKEND_NET as that would cause the generated
rsyslog messages to be malformed. The UDP packets would only have
one byte payloads which is not correct. So make sure that user is
not able to select a configuration with immediate mode and network
logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4, then allow to use its address instead
of giving error if static address cannot be set. Similar fix for
IPv6, so allow user to manually set an IPv6 address.
Because DHCPv4 has already set the IPv4 address to the network
interface, then zperf might not be able to add the pre-configured
address to it. So instead of returning immediately, try to use the
IP address that is already in the network interface. This way we
avoid this error print.
uart:~$ zperf udp download 5001
Setting IP address 2001:db8::1
Setting destination IP address 2001:db8::2
Cannot set IPv4 address 192.0.2.1
Unable to set IP
Setting destination IP address 192.0.2.2
Cannot set IPv4 address 192.0.2.1
Unable to set IPv4
Binding to 192.0.2.1
Cannot bind IPv4 UDP port 5001 (-2)
In this example, the network interface already had a proper and working
IPv4 address 192.168.0.2 in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the code uses hw cycles and tries to convert them
to usec. I noticed some failures with this, for example the test
duration was sometimes missed meaning that instead of testing 5
seconds, we bailed out after 2 sec etc. After the kernel k_timeout_t
changes, which added APIs to support usec accuracy, we can use usec
and ticks here. This simplifies the code a bit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In native_posix, the code calls k_busy_wait() but with wrong
value (k_timeout_t instead of int).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The current name Socket TagoIO HTTP Client still refering to directory
samples/net/sockets. Rename to TagoIO IoT Cloud HTTP Sample to reflect
better the application sample intention.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There are some hardware combinations (board/shields) that report the
error undefined initialization levels used at link phase. Add pinmux
Kconfig at project configuration to fix the issue.
Fixes#30029.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
move all CivetWeb samples to one directory
add directory with CivetWeb common includes
update cmake files
move civetweb sample folder to samples/net
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
The test script http-get-file-test.sh will send a POST to inform
whether the test was ok or not. This is needed so that we can
test the TLS functionality properly, earlier use of netcat would
not do TLS handshakes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pass/fail return code was not returned to the caller in
Docker based testing so the runner script did not know if the
sample test passed or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pass/fail return code was not returned to the caller in
Docker based testing so the runner script did not know if the
sample test passed or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move actual test cases from the run-sample-tests.sh script to
the network samples directory that are supported by Docker based
testing. Each network sample directory that supports Docker testing,
will contain docker-test.sh script that is sourced by the runner
script. The docker-test.sh script will run the test as needed and
then return return value to the runner script.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Samples that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Start the listeners after the "connected" event from connection
manager has been received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the client sends OK or FAIL, then it means that we are run
under a test system and we should stop running and exit so that
the test runner (scripts/net/run-sample-tests.sh) can report
success or failure.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user sets CONFIG_NET_SAMPLE_SERVE_LARGE_FILE then the sample
will return 100KB file. By default 2KB file is returned.
This is used by the Docker based testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This feature is used by scripts/net/run-sample-tests.sh script
which connects the Zephyr gPTP sample to Linux gPTP daemon running
on a Docker container.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for CONFIG_NET_SAMPLE_SEND_ITERATIONS option so that
this sample can be run multiple times against HTTP(s) server
that is running inside a Docker container.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sample was producing quite a few `<log_strdup alloc failed>`
warnings when running in default configuration on qemu_x86. Increase the
log_strdup buffer count to prevent that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add bootstrap section to the documentation, explaining how to configure
the Leshan Demo Bootstrap Server locally and run the sample.
Update the download link for the Leshan Demo Server, according to the
upstream Leshan documentation.
Fix bullet list with Leshan security parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlay-bootstrap.conf which allows to easily configure the sample
to use the bootstrap server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The es-WIFI driver is used by Inventek's es-WIFI shields. This enables
wifi sample to build all variations to ensures that dependencies are
meet.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
It is useful to see the name of the handler thread for debugging
purposes so set it when starting the handler thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to suspend or resume the GSM modem. These commands
might not be enough as at least the SIMCOM 808 modem requires
that the modem is reset when it is resumed, and this application
does not do any reset atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Testing the sample with Zephyr SDK 1.14 (vs 1.13) with qemu_x86
showed that it consistently crashes on 2th-4th iteration. Avoid
bite-sized increase this time, and dump stack considerably to
avoid constant need to update it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
It's copy of openthread conf from samples/net/sockets/echo_client,
but requires increasing of main stack size to avoid crash.
Also fixes building if CONFIG_LWM2M_DTLS_SUPPORT is enabled #28787.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
