This addition would catch tests being added or modified and would run
those tests with --all and catch issues with non default board
configurations before they get merged into the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For CONFIG_UART_PIPE_ON_DEV_NAME the chosen property is
"zephyr,uart-pipe" not ""zephyr,bt-mon-uart".
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have the same pattern for how we map a chosen property to the device
label that generates a Kconfig define. Rather than duplicating the code
over and over again, lets just iterate over a list of defines and chosen
properties. This also provides us a list we can use in the future to
special case handle the defines associated with names.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch fixes following error of python script.
TypeError: cannot use a string pattern on a bytes-like object
Jira: ZEP-2290
Signed-off-by: Punit Vara <punit.vara@intel.com>
We now create a special IA hardware task for handling
double faults. This has a known good stack so that if
the kernel tries to push stack data onto an unmapped page,
we don't triple-fault and reset the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We will need this for stack memory protection scenarios
where a writable GDT with Task State Segment descriptors
will be used. The addresses of the TSS segments cannot be
put in the GDT via preprocessor magic due to architecture
requirments that the address be split up into different
fields in the segment descriptor.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has one use-case: configuring the double-fault #DF
exception handler to do an IA task switch to a special
IA task with a known good stack, such that we can dump
diagnostic information and then panic.
Will be used for stack overflow detection in kernel mode,
as otherwise the CPU will triple-fault and reset.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is one less host tool we have to compile for every build,
and makes the build tools more portable across host OSes.
The code is also much simpler to maintain.
Issue: ZEP-2063
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By having this as a Python script rather than a host executable, this
should simplify the build process on non-Unix platforms.
With this change, pyelftools is now required to build Zephyr. Please
consult the getting started documentation for your host platform for
installation instructions.
Jira: ZEP-2062
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
List all required modules in one file and just call pip with this
file to install all needed modules instead of listing them
individually.
Added gitlint and pyocd and other required packages to the list.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Current version of extract_dts_include.py assumes end subnode
of pinctrl is 'pin'. This fix allows having different names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
def_label generation was assuming node names always have address
(eg: rcc@40023800). This was generating incorrect def_labels
when node names doen't have address (eg: pin-controller)
With this fix, this case is now taken into account
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
patch uses chosen property zephyr,bt-uart, zephyr,uart-pipe
and zephyr,bt-mon-uart to determine the uart instance to be
used for bluetooth,uart_pipe and bluetooth_monitor and generate
appropriate configs.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Commands for objdump and nm where hardcoded in size_report
script, which failed on MacOS as it tried to use ones from
Xcode. Fixed the script to pick the right objdump and nm
from the toolchain being used to build the application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Its possible that #size-cells is 0 (ie i2c bus). So we should handle
either #address-cells or #size-cells being 0 in extract_reg_prop. This
means that the reg property in reduced map will end up being an integer,
so we need to convert it to a list with one element. We also need to
not output any address-cell or size-cell related info if the respective
cell is 0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can use the chosen property "zephyr,console" to determine what uart
should be used as the console and find its name to generate a define for
CONFIG_UART_CONSOLE_ON_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Verbose output now prints the value of the raw data provided by
soc.c file. The page directories are printed with the correct
address ranges for each required region.
Updated the page table number calculation and also updated other
calculations which use this information.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
It's useful to see what original memory regions were configured
in code via the MMU_BOOT_REGION() macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the depends_on has more than one item we need to match all of those
dependencies in the supported list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The script failed on certain corner cases. Whenever the memory region
was falling on the PDE boundary, the glitch was causing incorrect
PTE to be generated.
JIRA: ZEP-2328
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch fixes issues with the IRQ definitions when using
the interrupt-names property in the DT entry.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This script was assuming that all XIP data copied sections
were contiguous. However with application memory partitioning
enabled, this is not the case; in between the kernel data sections
and the app data sections will be the kernel's BSS and noinit.
As a quick fix, reset the last section compared if we encounter
the kernel's BSS section.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Makefiles which start QEMU (make run) have been changed to operate
off of the QEMU_INSTANCE variable. QEMU_INSTANCE is simply appended
to the pid and sock file names. This makes us able to run multiple
QEMU Zephyr instances of the same sample.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Some testcases can only be built with certain toolchains. Instead of
using filters, add support for toolchain keyword which enables
whitelisting and exclusion.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put the results of the config-sanitycheck into their own log so we can
see warnings from that stage of the build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have more than one board of a given type we need to be able to
specify the board_id to select which specific board that the pyocd
command should target. Introduce an environment variable PYOCD_BOARD_ID
to we can set that will get passed to the pyocd command that needs it.
Here's an example:
$ make -C samples/hello_world/ BOARD=frdm_k64f flash PYOCD_BOARD_ID=1234
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We define a variable to pickup a default for the bossa binary, however
we weren't using it. Lets do so now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The build_on_all tag in synchronisation sample was resetting the
supplied arguemnt for filtering platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit changes the syntax of the testcase files and changes the
behaviour and configuration of the sanitycheck script.
To avoid having multiple files with different syntax for boards,
samples, tests; this change unifies the syntax and uses YAML instead of
INI.
We maintain the current keywords used in the old syntax and maintain the
flexibility of adding tests with different configuration by using YAML
list configuration. On top of that, the following features are added:
- We now scan for board configurations in the boards directory and look
for a YAML file describing a board and how it should be tested. This
eliminates the need for listing boards per architecture in a special ini
file under scripts/.
- We define hardware information charachterstics in the board YAML file
that helps identifying if a certain test should run on that board or
not. For example, we can specify the available RAM in the board and
filter tests that would require more RAM than the board can handle.
- Boards can be set as default for testing meaning that we always run a
test case (build and run of possible) when sanitycheck is called without
any arguments. Previously this was done only by selecting the first
board defined for a specific architecture.
- Tests can be configured to run on all possible boards, this is to make
sure we always build some basic tests for all boards to catch issues
with the core kernel features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This flashes Zephyr at 0x1000: that's where the first stage bootloader,
part of the ESP32 ROM, expects to find an "image header".
The second-stage bootloader, part of ESP-IDF, isn't used by the Zephyr
port. However, the bootloader can be used if desired; please refer to
the ESP-IDF documentation on how to set up partitions tables and use
the bootloader.
The following environment variables will affect the ESP32 flashing
process:
Variable Default value
ESP_DEVICE /dev/ttyUSB0
ESP_BAUD_RATE 921600
ESP_FLASH_SIZE detect
ESP_FLASH_FREQ 40m
ESP_FLASH_MODE dio
ESP_TOOL espidf
It's impossible to determine which serial port the ESP32 board is
connected to, as it uses a generic RS232-USB converter. The default of
/dev/ttyUSB0 is provided as that's often the assigned name on a Linux
machine without any other such converters.
The baud rate of 921600bps is recommended. If experiencing issues when
flashing, try halving the value a few times (460800, 230400, 115200,
etc). It might be necessary to change the flash frequency or the flash
mode; please refer to the esptool documentation for guidance on these
settings.
If ${ESP_TOOL} is set to "espidf", the esptool.py script found within
ESP-IDF will be used. Otherwise, this variable is handled as a path to
the tool.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Three environment variables must be set to use this variant:
export ZEPHYR_GCC_VARIANT="espressif"
export ESP_IDF_PATH=/path/to/esp-idf
export ESPRESSIF_TOOLCHAIN_PATH=/path/to/xtensa-esp32-elf/
ESP-IDF is the SDK provided by Espressif. It contains, among other things,
the HAL and header files for registers and ROM functions used by the Zephyr
port. At this stage, with the exception of the HAL library, none of the
binary blobs provided by ESP-IDF are used. This can be obtained directly
from Espressif, at <https://github.com/espressif/esp-idf>.
Instructions on how to obtain the toolchain are detailed in the README for
ESP-IDF.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This patch fixes the LOAD_OFFSET calculation to use the actual offset
of the partition. This assumes the reg entry in the DTS for that
partition is in relative offset to the flash base address.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch changes the config target to use the config-sanitycheck
target. The config-sanitycheck target gets not only the Kconfig
options, but also the DTS generated options.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- board name olimex_stm32_e407
- CPU STM32F407ZGT6 Cortex M4
- LED/BUTTON support
- Console on USART1 with 8n1 115200 baud
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Generates the MMU page tables. This creates a binary output for
the page tables. It takes an binary input which represents the
configuration information needed to generate the page tables.
JIRA:ZEP-2096
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch ports helper scripts from python2 to python3
with following changes:
- print should be used with () in python3
- resolved bytes-like object is required, not 'str'
- added python3 header
ZEP-2054
Signed-off-by: punit vara <punit.vara@intel.com>
This patch fixes a bug with the computation of the FLASH_LOAD_OFFSET
option that is derived as part of the DTS parsing. Offset should be
the relative offset from the base of flash. If the flash base address
and selected partition are the same, the offset should be 0.
JIRA: ZEP-2260
Signed-off-by: Andy Gross <andy.gross@linaro.org>
When we build with newlib enabled and utilizing one of the other
variants (like having floating point enabled) we need to have the proper
library path setup to find the library. This is mimicked after what we
do in Makefile.toolchain.zephyr for newlib.
Issue: ZEP-2240
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When checking for line length limits, ignore lines with Signed-off-by.
Some developers have a long name that would not fit within the limits.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add necessary board files, pinmux and device tree in order to have a
usable debug console.
Origin: Original
Change-Id: I43a9d278c3f2c936a714263626722f630367b663
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
On MSYS2, the #include paths for GCC need to be in native format
(Windows-style paths) since GCC is a native Windows application and
therefore requires standard paths.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This will generate an additional file that can be sourced by the build
system to expose definitions generated by device tree and used for
flashing and debugging targets.
Change-Id: I184e247f0a8dbd1a4a42dd4b02ea01f2caa70533
Jira: ZEP-2119
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use argeparse for options and add a fixup option to add on top of
generated file. This was previously done in the top Makefile and was
generated defines outside of the header main if statement.
Jira: ZEP-2147
Change-Id: If65f34a11de27baa770d4ce0ef4fca2abbd30258
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 96def63f10.
This breaks building with xtools for some reason, removing for now while
we figure out what went wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of requiring the dts overlay files to be at the top level
directory (where make is invoked), allow this default to be overridden
by setting DTS_OVERLAY_DIR. This is a directory where the overlays
themselves (which are still named $(BOARD_NAME).overlay) will live.
Change-Id: Ie9796afbd27971650b7636a36149c0d1f8e2b9fb
Signed-off-by: David Brown <david.brown@linaro.org>
This patch adds a dependency for the DTS overlay so that the DTS is
compiled when the state of the overlay file changes.
Change-Id: I2affe67f90f56b1d97384d5cd4e3026abed24253
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The 0.9.1 SDK is now required to cover all architectures and to enable
tests on all plartforms supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Eliminate following errors:
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
Also, usage of CROSS_COMPILE with a predefined toolchain is not required and
complicates things, just call CROSS_COMPILE with the full path if you
want to build with a toolchain not supported with Zephyr.
Change-Id: I93ec4ff2e04d22cee82c8e4b74b652927572b30a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the value of the property is a string quote it on output. This lets
us use things like label properties that will have values of strings.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The stm32f4discovery was incorrectly named and should have been
stm32f4_disco. Also added 96b_carbon_nrf51 that was missing from the
list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add configuration, pinmux, dts and documentation for the STM32L496G
Discovery board based on the STM32L496AG SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Now that we can specify what toolchain is intended for each
SOC, enable some more SOCs to be built.
A full sanitycheck run will require the installation of both
RF-2016.4 and RG-2016.4 releases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XTENSA_TOOLS_PATH and XTENSA_BUILDS_PATH have been retired.
XTENSA_SDK is now the base directory for the Xtensa SDK. The build
systems will search for toolchains in there, using
CONFIG_TOOLCHAIN_VARIANT to locate the right one. It defaults to
/opt/xtensa.
XTENSA_BUILD_PATHS is now a list of additional directories to search
for Xtensa CPU builds. By default the build system will already search
the builds included in the SDK; this is intended for vendor-supplied
CPU build definitions.
Some whitespace changes made for readability and comments added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This greatly increases the speed in which test cases are evaluated
on the Xtensa simulator.
The cycle limit parameter was removed, we don't currently need it
since sanitycheck handles killing test cases if they time out.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
classname seems to be expected by some parsers, so use it in the report,
the name now has the same value, we can add some more information once
we have meaningful metadata for the testcases with more details.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This new options makes it possible to only run a subset of the tests
which will allow us to run sanitycheck on multiple hosts and merge the
results into one report. This way we do not need to worry about
selecting specific architectures to be run on a certain host.
The option accepts a string value: x/y where x is the subset and y is
the total, so if we specify --subset 1/5, we will only run the first
fifth of the total tests, --subset 5/5 would only select the last fifth.
To get consistent results, the testcase instance list is now ordered,
to avoid duplications and have full coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add necessary board files, pinmux and device tree in order to have a
usable debug console.
Origin: Original
Change-Id: I280320700352fd36a544c03f4e57d2eeec2449e5
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Adds a new debug support script using pyOCD and configures most NXP
boards so they can use it. frdm_kw41z is the one exception because pyOCD
doesn't yet support kw41z. Tested with pyOCD v0.8.0 and the latest
DAPLink firmware for each board.
Introduces two new environment variables, PYOCD_FLASHTOOL and
PYOCD_GDBSERVER, that allow you to set custom paths to the pyOCD tools.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new debug support script using Segger JLink and configures all
NXP boards so they can use it. Tested with Segger JLink GDB server
V6.14b and OpenSDA v2.1 firmware.
Change-Id: Ia1b297d9c93d21db61379e22f27ae54cda3ad461
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
C library is not actually used by the xtensa port, we only need the
'exit' function. Implement 'exit' in crt1-* and drop remaining
references to the C library.
Change-Id: I8a562363956b4755a6b5baee7acf3726485e5ce3
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Building zephyr for xtensa with gcc requires additional include paths and
additional library (libhal).
Add xtensa sysroot and include paths to CFLAGS when building for xtensa.
The root Makefile then does the right thing adding these parameters to
KBUILD_CFLAGS and KBUILD_ASFLAGS.
Add xtensa libhal to the TOOLCHAIN_LIBS_xtensa. Modify TOOLICHAIN_LIBS to
include arch-specific libraries.
Seems that it would be nice to have TOOLCHAIN_CFLAGS_$(ARCH) with the
same behavior as TOOLCHAIN_LIBS_$(ARCH). It also seems that the SYSROOT
definition doesn't have to be restricted to MAKEFILE_TOOLCHAIN_DO_PASS2.
Change-Id: Ia6703ca067b964ac2f8be8fe8513ca28f101a6a3
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This core configuration was removed from the tree since it cannot
implement irq_offload().
Remove an orphaned block in xtesna.ini.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add configuration, dts and documentation for the Nucleo L432KC board
based on the STM32L432KC SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Make sure we get full name in the commit message and not the username or
some incomplete data that we need to decipher. We still need to verify
the commiter name that is not part of the commit message body, but this
is out of scope of gitlint.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit provides support for disco_l475_iot1 board
Pinmux driver is provided with initial support definitions
Change-Id: I17b637a8ba0b033014969eca8fffe76319c47c52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to allow the use of such board, a very preliminar port was
developed. It consists of board files, as well as pinmux, uart, gpio,
spi drivers and device tree files.
Change-Id: I5753064e39e0b023cf4481744c176de26d8dbebb
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add initial .shippable.yml for CI integration on github and related
scripts.
Change-Id: I095d125e780bba980e635e218205c8741e753a8e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently running "make V=1 flash/debug" does not result in the caller
discovering what commands are run to perform the action because make
calls into an opaque script (which then makes complex invokations of
both openocd and gdb). Make the script more transparent by conditionally
enabling enabling tracing within the script.
We also remove the "Done flashing" message. It is pointless because
openocd has already *told* us it has done flashing ["wrote 16384 bytes
from file .../zephyr.elf in 0.802135s (19.947 KiB/s)"]. It is also
potentially misleading since it tells us we are "Done flashing" even
when we failed to flash anything which risks misleading someone
unfamiliar with openocd.
Change-Id: Icaea28c4b00ac10965726dd4502162b7de080953
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Generate a test report using junit/xunit format with all details and
logs that can be published on the web to show results from a sanitycheck
run.
Output is stored in scripts/sanity_chk/ alongside the CSV file.
Change-Id: I5ea6f409c1f86f408eeae870b90a953e71046da9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Install gitlint using pip:
# pip install gitlint
# gitlint install-hook
This will install the pre-commit hook.
Policies are define in .gitlint. Custom rules are available under
scripts/gitlint.
This script will also run in CI, so avoid CI errors by using the hook
above.
Change-Id: I62750a1fd9369341db29c413a6c4a1677bb0db8a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To speed up builds, this change allows building the needed host tools
that are built for every application and stores them un
${ZEPHYR_BASE}/bin.
Run 'make host-tools' and then define PREBUILT_HOST_TOOLS to reuse the
host tools across multiple builds.
$ make host-tools
HOSTCC scripts/basic/fixdep
HOSTCC scripts/gen_idt/version.o
HOSTCC scripts/gen_idt/gen_idt.o
HOSTLD scripts/gen_idt/gen_idt
HOSTCC scripts/gen_offset_header/gen_offset_header.o
HOSTLD scripts/gen_offset_header/gen_offset_header
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
$ export PREBUILT_HOST_TOOLS=${ZEPHYR_BASE}/bin
$ make -C samples/hello_world
Now you will notice a speedup when building the application!
Change-Id: Ie0aeee7f9a60b1fd49e7e32d78601f03473d73b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only in rare cases should we allow C99 types, so lets warn about it to
catch issues.
Change-Id: I2bacdd4ba98f88482e0b7acc0567ff1139e749bf
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Hex mumeric values directly in the expression were cast correctly
via the t_HEX rule, but ValueErrors would occur if a hex value was
looked up due to the expansion of some environment symbol.
Change-Id: Ia98dfea91eff4ed95778922d38d2967284f4e31b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Yes, revert the revert, was a little too quick to apply this. The fix
is to cleanup the dtsi file in question.
This reverts commit 6702686976.
Change-Id: I933fad9d96ec6375eda33f0b012349f1c39e261f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* CONFIG_SOC is now properly set and we do not need a separate
XTENSA_CORE build variable
* Some unnecessary macro -D CFLAGS in the Xtensa Makefile removed
* There is no default SOC selection, it is now done explicitly in
the board's defconfig
* CONFIG_<board name> now renamed to CONFIG_SOC_<board name in
uppercase> to conform to established style.
Issue: ZEP-1711
Change-Id: I88997530db09970b7fdd1c3e3d355bfca9d0be1a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 1c06065941.
Breaks cc3200_launchxl really bad:
CC drivers/serial/uart_cc32xx.o
/projects/zephyr4/drivers/serial/uart_cc32xx.c:39:18: error: ‘TI_CC32XX_UART_4000C000_BASE_ADDRESS’ undeclared here (not in a function)
.base = (void *)TI_CC32XX_UART_4000C000_BASE_ADDRESS,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/projects/zephyr4/drivers/serial/uart_cc32xx.c: In function ‘uart_cc32xx_init’:
/projects/zephyr4/drivers/serial/uart_cc32xx.c:65:5: error: ‘TI_CC32XX_UART_4000C000_BAUD_RATE’ undeclared (first use in this function)
TI_CC32XX_UART_4000C000_BAUD_RATE,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: If46c239bc8d6b4296494f638e900f6044a92ce26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes an issue with mixed case node names. Node names
containing upper case letters were causing key match errors during
post processing. This patch maintains the case of the node names.
Change-Id: I153a186fa09dcf958c9de55b578dbc63e615a076
Signed-off-by: Andy Gross <andy.gross@linaro.org>
A patch moved the specification of debug flags to a
KBUILD_CFLAGS_OPTIMIZE, but this Makefile wasn't updated.
Change-Id: Ic0d23f95609798473298cda4c044981edabb3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is intended as a temporary fix for ZEP-1882.
Investigation for this bug has shown that the current SDK 0.9 compiler
for ARC generates incorrect code under -Os optimization level.
Kuo-Lang Tseng found out that SDK 0.8.2 does not have this issue, and
that lowering optimization level to -O2 fixes the issue with SDK 0.9.
Juro Bystricky is working on an updated SDK with ARC GCC 6.3.0, but
there are still problems with it, so he also suggested to use -O2 in
the meantime.
Instead of blindly setting -O2 for all toolchains and architectures,
let Makefile.toolchain.zephyr make the decision for ARC and 0.9 only.
Tested with hello_world, CONFIG_ADC=y and BOARD=arduino_101_sss.
Jira: ZEP-1882
Change-Id: Ifde2e3950c9d93eed8982149805acfda9d13a94f
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Initial assumption with Arduino 101 was that the "alternate setting
name of the DFU interface" would be simple enough to be used as the
grep pattern when attempting to find the board in DFU mode.
However, for boards such as the 96Boards Carbon, this name includes
grep meta-characters, so the DFUUTIL_ALT environment variable is
provided as a numeric value, instead of the previously expected name
string.
In order to avoid false positives, we now check whether DFUUTIL_ALT
is a numeric value, and the grep pattern is adjusted accordingly to
search for either "alt=" or "name=".
Also take into account that the name might contain spaces.
Change-Id: I81351d03bd727b35093fd1280e2b8b6904f3c89b
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
This patch adds DTS application overlay support. Applications
requiring specific device features can specify these using
board dtsi files located in the application directory. These overlay
files are board specific.
Issue: ZEP-1745
Change-Id: I1c5f1a8a198fe543b6d52ee8c1fb31a2038a7956
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Introduce a system include so that board dts files are able to live in
any location and properly include the things they need.
Change-Id: Icd26433117a4ca9726aeb74eec9f72c6d9df617c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
We were missing the cell name in how we create the IRQ define. This was
working fine because the only name we had been using with IRQ which we
would shorten down.
Change-Id: I8449c8ced1a9284982d3d5b07c6acdcf26e965e2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add DFUUTIL_DFUSE_ADDR to the list of dfu-util environment variables,
which can be used to flash DfuSe devices (e.g. STM32 based MCUs).
Change-Id: I39fdc338f7f034376ce50b648b06f39fee3169a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
At present 'make flash' target for boards that support flashing with
OpenOCD works only with Zephyr SDK. This patch enables flashing
without Zephyr SDK as long as openocd itself is installed.
Change-Id: I4594d795225e54b7638839d590e4c0620f9ca88c
Jira: ZEP-1893
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Only the IRQ prasing was using cell_prefix and cell_string does the same
thing so lets just use that everywhere.
Change-Id: I2ef9b1e2c1baef54b71d811c835b29a9ca8fe81b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Flashing the Arduino 101 board over DFU can be tricky: the
dfu-util command line is cumbersome, and the reset button
must be pressed at the right time.
This script brings the convenience of 'make flash' for the
Arduino 101 board and for other boards that support the DFU
protocol. It checks whether the board is in DFU mode, and
prompts the user to reset it when needed.
The dfu-util command line is constructed from the following
environment variables, to be exported from the Makefile:
- DFUUTIL: path to the dfu-util executable, default: dfu-util
- DFUUTIL_PID: vendor_ID:product_ID of the board in DFU mode
- DFUUTIL_ALT: alternate setting name of the DFU interface
- DFUUTIL_IMG: path to the binary image sent to the board
Change-Id: Ia9577ec96102a92d4c60481f980f30f4f6e7cd9e
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a corner case that barely hits and thus we had not seen it
before.
Change-Id: Ie1420a4c866834e5a233985c6b8a19643426a1f5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Adjust the checkpatch script to recognize the volatile keyword as
forming part of a declaration. This prevents inappropriate checkpatch
gripes for patches such as:
https://gerrit.zephyrproject.org/r/#/c/10345/
Change-Id: Ia29a9002bb9ef15f747d29231d938ae12790724d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
We default DTC to /usr/bin/dtc so we can build targets that are using
devicetree and not using the zephyr SDK (which provides a version of
dtc).
Change-Id: I84c3e3181eda75b4da715e16bbde2e67f28785e7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the hardwired #! python path with a PATH search. This is
necessary to allow build tools to execute from a virtualenv.
Change-Id: Ib83131fd96656bc9f76c606356b1f92c877cc117
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
By convention Kconfigs are in all uppercase, but not strictly
required to be so. Currently the Xtensa build defines
CONFIG_${XTENSA_CORE} which can have lowercase letters. This
is marked for cleanup in ZEP-1711.
Issue: ZEP-1711
Change-Id: Ia901ea1688202129f1629001a77f498522859f14
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This toolchain Makefile defines CC/CXX directly so we need to add
a USE_CCACHE case here.
Change-Id: Iee8dc6ab030db8dc45b16e21c5b17864e51341b4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A ctrl-c in the script wouldn't terminate the child process.
Only do the pid trick if we're communicating with sanitycheck over
pipes.
Change-Id: I79da7362958b5fac00defd74d4b709076085575b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Manu command lin eoption are not supported by xt-c++. There are filtered out
when calling Makefile.toolchain.xcc.
Change-Id: I1e60843d2b23f90250fbb493487c6fc838b7485a
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
If passed after the file they are just ignored silently!
Change-Id: Ic9b04c3023e4d312382850fa5e1b5ae4ef555856
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
When current directory is a symbolic link or in a symbolic link then os.getcwd
return the real path leading to os.path.relpath returning not so nice relative
path.
Change-Id: I3e24d3e6f1fe7185992f64803d3728e9588d67e1
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Sanitycheck actually creates the pipes, using a naming convention imposed
by QEMU. We also need to leave a PID file.
'xt-run' Make target removed, we don't need it.
Change-Id: Ie9fd9dbb1327eb4b10424e7ee5d2f4dc09b121a4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows handling options like --fatal-warnings that are passed by
sanitycheck.
Change-Id: Ia78dcef480d9d81cab6051453204c05d52917af2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This completely breaks all the cc-option checks. It's not clear
why this was done for everyone running sanitycheck.
Change-Id: I3f944423869ccb15fab29c28130820a93cd94917
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In scripts/Makefile.qemu, the target qemu is already an alias for taget run.
In scripts/Makefile.xt{,sc}-run there is no target qemu but a target run.
Change-Id: Ib9dce3561ef9367b17d30070354e709df4d7e528
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
XCC does not recognize __builtin_unreachable() and thus cause a link error.
Change-Id: I5dadf5a49d971d5e0a5ef88d582bb5ad2c36bced
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
These libraries are unlikely to be uesd by GCC port and thus should not be in
a generic make file. Moved to specific toolchain make file.
Change-Id: Ib585b87700e409d678f7a5cb60cff67b6022ab05
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use this configuration file with the uncrustify tool to fix style
issues. the configuration should apply the zephyr coding style on
source code files with a few minor excrption. Do not take the output for
granted, always check for correctness after running.
To use, for example:
uncrustify --replace --no-backup -l C -c $ZEPHYR_BASE/scripts/uncrustify.conf
This will do the changes inline.
Change-Id: Iecfd2e10bc7e475ca83de0d921ebb5d72156d286
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many users set USE_CCACHE=1 in their envionment. Sanitycheck was
disregarding that and placing USE_CCACHE=0 in the generated
Makefile unless --ccache was added to the command line every time
it was invoked.
Issue: ZEP-1663
Change-Id: Id3c1379f5039d4d2f4a3ae01d2ec8d0dd216f523
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As decided during the Zephyr Mini Summit in December 2016, we're going
to use the same Device Tree format as used by the Linux kernel to store
device configuration from vendors.
This is a parser written during the summit that will parse *.dts files,
and will be used as part of the solution to read in the files provided
by manufacturers and generate board configuration files.
The script will also optionally generate files in the DOT language so
that DTS files can be graphed using the Graphviz suite.
Change-Id: I6e2b7a64a6dcc349b2888332a660b4700af6cd63
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 9fb0c2af5c.
SDK 0.9 has now been released.
Change-Id: I676b6f0e31ab48fde3dda41b681abf53964ea9f9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 0.9 SDK is not released yet!!
This reverts commit 7995e6207c.
Change-Id: I550d1aa27ba7a06ff2cda09496ceb92645a17460
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce support to tag some issues as warnings, that can be printed
but not considered errors.
Added the ability to write the errors and warnings to split files, for
later reporting.
Added a more consistent help.
Change-Id: Ia75430c3337385afca59595437168ab643c92911
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Values now spaced 4 apart since we commonly build thousands of
tests.
Percentage complete indicator added.
Change-Id: Ia7454dc1e8cc0701dc74dc8a4f6e7a37706524e8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were causing some issues in the old kernel, but the unified
kernel no longer uses these.
Issue: ZEP-513
Change-Id: I87216565231cd244886fbffe4b4d420d1687b245
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Compiling Zephyr with an external riscv32 toolchain would
require the following env variables to be exported:
export ZEPHYR_GCC_VARIANT=riscv32
export RISCV32_TOOLCHAIN_PATH=/PATH/TO/TOOLCHAIN/BINARY
Change-Id: I2072ed9079a4cabd27837ab39b947bc0a0a1a8b4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
At least one Linux distribution (Arch) has made python 3 the default
interpreter, and Debian and Ubuntu have expressed a desire to eventually
make this the case. As such, invoking 'python' or '/usr/bin/python'
will possibly run python 3 instead of version 2.
Distributions have included a 'python2' link for quite some time now,
and given that we have some scripts that require python 3, we should be
explicit about those that require python 2.
In addition, be more consistent about how python is invoked, preferring
the:
#!/usr/bin/env python2
construct rather than a hardcoded path to python. This allows the user
to have an alternative python in their path that will be used in
preference to the system provided version.
Jira: ZEP-1548
Change-Id: I125c2af808dc268f74277bc97a092df3acad23c0
Signed-off-by: David Brown <david.brown@linaro.org>
This had been erroneously reported as a build error.
Issue: ZEP-1460
Change-Id: Idddaf833011beb1165bd766dd115c021c5b90cdf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I813fabf1453f19ce7a83b28e4792b5c80616d936
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various changes required by new SDK 0.9:
1. Renamed toolchain vendor name ("poky" -> "zephyr")
2. Toolchains now 64 bit, previously 32 bit
3. New toolchain for Xtensa
4. New toolchain for RISC-V
0.8.2 is still supported.
Change-Id: Icfd4cc44ef643da0f3840b33d6dfc4b3c99dfa9a
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently CI plays tricks with `tee` to capture the output and post
process it. This makes it more complex to handle and easier for it to
fail in ways it should not.
So add a simple log capture option sanity check that mirrors the
stdout output, removing color encoding for errors.
Change-Id: I6de0b6cfe4da9c289f537979545dddbcd49cf834
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This reverts commit 4e2cf33d9d.
The change does not work correct if we have a filter and specify a
specific platform, such as:
./scripts/sanitycheck -p 96b_nitrogen -i -s samples/hello_world/test_singlethread
Change-Id: I43a4f25ed25c8fe5379cda23b6dbfa8f9ae5cb0d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I53d6bacf66045dde7baabbaa40b4fbfc4a01782a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added sanity args to be used by the compare footprint.
Please notice that compare footprint use sanitycheck to
build footprint apps for base commit and for current commit.
This in order to collect the information and generate the diff.
Change-Id: I6f86bbfa020999b3f26e93a608fc7b34ee508e10
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch does not apply anymore. A patched qemu already exists in the
SDK.
Change-Id: Iee18550a7b9288a1db2a6ecc4378ff554b240229
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The macro defines the stack as usual, but if user has
enabled net shell (CONFIG_NET_SHELL), then additional
information about the stack is stored in net_shell
linker section. The information in the net_shell linker
section is then used to print information about the
stacks in the networking sub-system.
Change-Id: Ic6e9f16a73a192b9a59d32a6d0070322382f98bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to store the nbr pool data into a dedicated section
as we have only one nbr pool defined.
Change-Id: I6f2afcce57b5f588878496bf085567b938e32c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We missed that section, so sanitycheck was failing.
Also putting the right section in the relevant array.
Change-Id: I361ffa1707c01f0d3c870a7bc36a86ada66af1d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without these, test case will fail miserably.
Change-Id: Ib46d167b8782c33362ac6edb9d8c50abc25908c0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
getenv() returns an string of unknown size, so Coverity warns that it
might be used to overflow the stack in the call chain off
conf_read_simple().
To avoid that, wisdom says copy to an string of known size and pass
that.
Change-Id: I9e468de0ae66429062027f58fe0a0a4e1197218f
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
(cherry picked from commit 0307d6ea5f)
Added new option to make sanitycheck script error on deprecation
warnings, to use:
sanitycheck --error-on-deprecations
For example, to find usage of legacy APIs in master, run the following:
sanitycheck -e legacy --error-on-deprecations
Change-Id: Ib83c266c8357475840dea03d62ceefed72b73f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running --only-failed make sure last_sanity.csv exists.
Change-Id: I862529a58f337987c37da83fd5541dd4f42b3391
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In windows systems the rename() function fails if the new name
of the original file corresponds to a file that already exists.
The fix removes the new file before renaming the original one.
Jira: ZEP-980
Change-Id: Ib3a43db86c0dd3fabb592f53ea7619eb5738bb65
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Coverity reported 150819 issue, which steams off Flex generated code
from zconf.l in which sprintf() was use. Because of that, the
conf_read_simple() @name parameter could be used to overrun
zconf_open() @fullname by crafting SRCTREE and KCONFIG_ALLCONFIG
environment variables.
Change-Id: I2cff817dccafe0e06b35636bbb7be95e062410af
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Update file to catch any regressions and major changes during
stabilisation period.
Change-Id: Id30dd1827034b96c5478c78f9c388384f51bcbec
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Right now the build system builds the host tools over and over again, in some
environments especially when running in an IDE on windows for example,
this is not desired and a set of pre-built host tools should be used.
Provide an option to use pre-built tools instead of building them
from source.
To use, set PREBUILT_HOST_TOOLS to the path where all pre-built host tools
are hosted. To get a prebuilt version of the host tools, build without the
variable set and copy the generated host binaries from outdir. The following
tools are supported:
* conf
* fixdep
* gen_idt
* gen_offset_header
Jira: ZEP-237
Change-Id: Iea505bfd0b50f851ee2781b5117bb6085ab20157
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for ARM V2M Beetle platform.
ARM V2M Beetle board is build around the ARM Beetle Cortex-M3
based processor.
The support has been tested in nanokernel mode with the bringup
application that will be pushed with a future patch.
Jira: ZEP-1245
Change-Id: Ib05a40c072f10149e692283177387cf2cfe32f66
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from
the Linux kernel.
Change-Id: Ie2cabbfea415d26ffacef340d9497342b496dc29
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 0c9152d42d.
This was not ready for merge yet.
Change-Id: I08f69e27929867606bc58cdeffed6540725069a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from the Linux
kernel.
Change-Id: I6314dd41eb200c87cdcc6f212f13d3351128de0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Similar to C subdir-ccflags, enable similar C++ variable subdir-cxxflags
Change-Id: I4355817bc2d6a80a3eebba9b87fbf54725dda5e7
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
sysgen will also now re-run if the build system detects that
the script itself has changed.
Change-Id: I2bf5c4893da088fa27729bc6337bc66cc4cee341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added Kconfig and makefiles to be able to build a Zephyr application
on Linux/gcc, and load via OpenOCD.
Validated by running the hello world, and philosophers microkernel
samples, and stepping through the code in gdb.
Jira: ZEP-1109
Change-Id: If5d3e7b1a8ecf5ecf6a00f147742b3bc5716190f
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Sysgen was still generating the TICK_EVENT event needed for the
microkernel system clock timer driver in the unified kernel. That ended
up dragging in alerts all the time, which in turns drag in the system
work queue, which drags in the work queue, which drags in FIFOs.
This shaves 1052 bytes of RAM and 860 bytes of ROM in systems that don't
need these components (on x86 with IAMCU).
Change-Id: Ica56857da2b6444181f10e83f6c986d092aa967b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Now that these platforms pass sanitycheck add them into the list of
platforms we support
Change-Id: If559c80e107505e6b98f81c0e94b9862618b1735
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enhance the linker script so that all statically-defined kernel
objects of a given type are co-located.
Note 1: This capability is needed so that static kernel objects
can be added to the associated object tracing list. (Some kernel
object types are already co-located to permit the kernel to do
other initialzation on statically-defined objects.)
Note 2: A follow-up commit is needed to ensure statically-
defined kernel objects are placed in the sections referenced
in the linker script.
Note 3: The legacy script info remains for now to allow
applications using the microkernel or nanokernel to continue
to build.
Change-Id: I40d831f9e183fb121c950e30fa8298b6d529375b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit:
commit f25ac092b9
"Makefile: Restructure for multilibs"
breaks external HAL library linking, by overriding, in the
the second Makefile pass, the LIB_INCLUDE_DIR variable
set in the first Makefile pass from ext/hal Makefiles.
This breaks use of the CONFIG_CC3200SDK_LIBRARY=y option in
the cc3200 SDK, and also likely the QMSI ext/hal/qmsi/Makefile,
when CONFIG_QMSI_LIBRARY=y is set.
This commit just changes the '=' to "+=".
Jira: ZEP-1163
Change-Id: I1aaaaee57378dcd01ab6f2ed4799281b2337eea2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Allows event objects to pend signals in a cumulative way using
the semaphore in a non-binary way.
Jira: ZEP-928
Change-Id: I3ce8a075ef89309118596ec5781c15d4f3289d34
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
