File descriptor I freed automagically when using POSIX subsystem's
close() function, but any subsys-adhoc functions like zsock_close()
should do that explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With FD table introduction, net_context can no longer be reached by
typecasting socket descriptor. Instead, file descriptor API have to be
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ztls_setsockopt and ztls_getsockopt returned error codes instead of
setting errno in particular cases. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously the "socket file descriptors" were just net_context
pointers cast to int. For full POSIX compatibility and support
of generic operations line read/write/close/fcntl/ioctl, the
real file descriptors should be supported, as implemented by
fdtable mini-subsys.
Socket implementation already has userspace vs flatspace dichotomy,
and adding to that ptr-fds vs real-fds dichotomy (4 possible cases)
is just too cumbersome. So, switch sockets to real fd's regardless
if full POSIX subsystem is enabled or not.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes following warning:
...
subsys/net/lib/dns/llmnr_responder.c:24:0:
subsys/net/lib/dns/llmnr_responder.c: In function ‘recv_cb’:
include/net/net_pkt.h:1203:9: warning: ‘addr’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
return net_pkt_append(pkt, len, data, timeout) == len;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
subsys/net/lib/dns/llmnr_responder.c:306:14: note: ‘addr’ was declared
here
const u8_t *addr;
^~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes warning:
warning: ‘ipv6’ defined but not used [-Wunused-variable]
static struct net_context *ipv6;
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current TLS socket implementation assumed that PSK ID stored in
credential manager is NULL terminated. It's actually better to store
only the string content, as the string length is stored as well. This
approach is less confusing, when a user is not operating on C strings
but on a non-NULL terminated byte array.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In coap_option_value_to_int function, when coap option length is 4,
option->value[3] should be shifted by 0 rather than option->value[2].
This doesn't affect the behavior of function but needs to be fixed.
In coap_append_option_int function, when the value is between 0xffff
and 0xffffff(when option length is 3), bit shift operation is wrong.
For example, if the value is 0xABCDEF, by sys_put_be16(val, data)
data[0]=0xCD, data[1]=0xEF, by val >> 16, data[2]=0xAB. So the result
becomes 0xCDEFAB not 0xABCDEF. So, to sys_put_be16 function hand
&data[1] over instead of handing data over and val >> 16 needs to be
set to data[0], not data[2].
Signed-off-by: Taehwa Kang <hegrecomm@gmail.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch enables BSD socket offload to a dedicated
TCP/IP offload engine.
This provides a simpler, more direct mechanism than going
through NET_OFFLOAD (zsock -> net_context -> socket conversions)
for those devices which provide complete TCP/IP offload at the
BSD socket level, and whose use cases do not require
IP routing between multiple network interfaces.
To use, configure CONFIG_NET_SOCKETS_OFFLOAD=y, and register
socket_offload_ops with this module.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For ease of maintenance, let's swap the reader/writer initialization
syntax to:
.put_begin = put_begin,
.put_end = put_end,
...
This way we only assign used fields and adding new ones later is
less error prone.
Signed-off-by: Michael Scott <mike@foundries.io>
We set "insert" to true when the value is already in the buffer, but
we need to insert a TLV to denote things like RESOURCE_INSTANCE or
OBJECT_INSTANCE. In this case, let's not re-add the value.
Signed-off-by: Michael Scott <mike@foundries.io>
