This makes the 72Mhz HFRCO drive the MCU HF clock, and only uses
the HFXO to drive the ethernet clock.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
This defines the TRNG for EFM32GG11 and enables it for trng0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
This defines wdog0 and wdog1 for the EFM32GG11 MCU and enables wdog0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
Use the new DT facilities to configure ADC pinmux on all boards with
STM32 MCUs currently supporting the ADC.
Signed-off-by: Martin Jäger <martin@libre.solar>
If neither a random address nor a specific local address is in the
device tree, then use the MAC address from the device information page.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
The Cypress cy8ckit_062_wifi_bt kit is splitted on two directories.
There is no reason to keep it separated. This squash M4 and M0 boards
as one board file.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add pinctrl-0 property for CAN nodes and remove pinmux.c.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martin Jäger <martin@libre.solar>
The WGM160P module combines the WF200 Wi-Fi transceiver with
an EFM32GG11 MCU
This code is based on the efm32gg_stk3701a board definitions
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
Use the new DT facilities to configure DAC pinmux on all STM32 nucleo
boards currently supporting the DAC.
Signed-off-by: Martin Jäger <martin@libre.solar>
The nrf52 bsim hw models now require some of these to
be defined. For this case we cannot implement these
as static inline functions as that would redefinitions
of the functions.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In PR #26836, we switch nSIM from custom legacy ARC UART model
to ns16550 model, which will allow us to use zephyr images build for
nSIM on other platforms like HAPS, QEMU, etc...
In PR #27334, which introduce new board nsim_em7d_v22, has gone
parallel to the switch to dwuart, and is still using legacy model.
With wrong configuration, the uart for nsim_em7d_v22 has no output,
which cause all tests failure.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The variant of STM32F030R8 on the board is STM32F030R8T6 which does not
have I2C2 SCL/SDA on PA11/PA12. Change the pinmux to use PB10/PB11
instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables hardware stack protection on all possible nxp lpc boards to
help detect stack overflows more easily. Boards that do not have mpu
support are excluded.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables hardware stack protection on all possible nxp kinetis boards to
help detect stack overflows more easily. Boards that do not have mpu
support are excluded.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables hardware stack protection on all nxp i.mx rt boards to help
detect stack overflows more easily.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
