net_rpl_get_interface() function which returns always NULL is
defined if NET_RPL is not enabled. so remove deprecated tag to
this particular function. Otherwise it will cause unnecessary
compilation warnings.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Including Bluetooth to every project unnecessary increase size of the
project, for example hello world sizes:
Memory region Used Size Region Size %age Used
FLASH: 48492 B 1 MB 4.62%
SRAM: 11236 B 256 KB 4.29%
IDT_LIST: 136 B 2 KB 6.64%
after the patch:
Memory region Used Size Region Size %age Used
FLASH: 13344 B 1 MB 1.27%
SRAM: 4004 B 256 KB 1.53%
IDT_LIST: 72 B 2 KB 3.52%
3+ times difference.
PS: It also crashes when 802.15.4 enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Log_output module was always postfixing printk strings
with '\r'. If printk message did not ended with '\n'
it lead to last printk message being overwritten.
Fixed by adding '\r' only when string was ended by '\n'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add documentation for the quark_se_c1000_devboard with links to platform
guidelines and other details.
Fixes#11166
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Cortex-M7 CPU included in the SAM e70 SoCs has a data cache that
significantly boost the performances. However the SAM GMAC Ethernet
driver is using a scatter-gather technique to exchange data with the
Ethernet driver. This requires the use use of a non-cached memory area.
This is currently not supported on Zephyr, but support for it is being
discussed in PR#11199.
In the meantime, enable the data cache during the SoC initialization,
unless the SAM GMAC Ethernet driver is enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Cortex-M7 CPU included in the SAM e70 SoCs has an instruction cache
that significantly boost the performances. Enable it during the SoC
initialization.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enable cache operations before starting a DMA operation if the CPU has a
cache. All the support was already in place, it just needs to be
enabled.
With the previous commits, it allows the I2S tests to pass on a SAM E70
Xplained board with the CPU cache enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The memory slabs used for I2S are used through DMA. In case the CPU has
a cache, we need to ensure minimum alignment so that an entire number of
cache lines can be cleaned or invalidated.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Shell log backend was using k_fifo to enqueue log messages.
It was using field in log message that was used for same
purpose in log_core before passing message to backends.
However, this method supported only single shell as
other shell was corruption the fifo because field was
reused.
Modified shell log backend to use k_msgq for pending
messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This effectively reverts part of earlier 49bb163756 which moved
interrupt acknowledgement until after return from the user callback.
This was done confusing the flow of this driver with how some other
drivers do it, where pending interrupt status is checked by
uart_irq_rx_ready()/uart_irq_tx_ready(), which should be called by
the callback. But the uart_cmsdk_apb driver actually uses different
hardware register in these functions. And acking IRQs after user
callback can lead to race condition and losing an IRQ, and the
simple fix in this case is just move acknowledgement to where it
was before.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Nordic USB driver shim uses nrfx_usbd driver from nrfx package.
The driver was protected by a semaphore during every transfer
to prevent access from multiple threads at the same time.
This leads to the problem when a class schedules transfer on one
endpoint before host asks for the data (to be sent later) - driver
is locked and other endpoints (including control EP) are blocked.
Currently, only driver calls are wrapped with semaphore without
waiting for the transfer to complete, allowing scheduling transfers
on different endpoints. This is allowed bu nrfx_usbd, however
shim prevents user from scheduling multiple transfers on one
EP (required by nrfx_usbd).
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Accourding to Bluetooth specification the Service Changed
Characteristic shall not have its handle changed once it has been
bonded, so this moves the GATT service to be the very first service
registered that way it is guaranteed that it won't change even if
device is flashed with a different configuration which end up changing
the handles after it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Calling fifo_fill function from uart_nrfx_uarte in the same
interrupt more than once, would break previous transmission.
Following fix adds checking if previous data was sent, and
if not, returns 0.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
It is related to b904ad387f.
This fixes checking ECDH related events in event mask.
If ECDH support is disabled in host, there is no need to check
if those are supported in the controller.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Running tests compiled for 64bit architecture were causing errors
in logger module. Updated unittest.cmake to build tests only
for 32bit architecture.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Currently shell UART backend is interrupt driven if UART driver
is interrupt driven. That can be limitation if one instance
wants to use interrupts but shell UART should not.
Added option to shell uart to be able to control use of
interrupts. By default interrupts are enabled if driver
supports it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix false passed on localized error message in make invocation.
Fixes#8348
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added description how to build, programm and see console output of
hello_world example on cy8ckit_062_wifi_bt_m0 board.
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
This option is useful to have for a flatter hierarchy for one-off SoCs
that aren't split into family and series from the silicon vendor
perspective.
The commit saying it was going to go away is from 2 years ago; it
hasn't happened and it doesn't seem to need to happen. Just delete it.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The Interrupt Controller on the Quark D2000 doesn't support irq priority
to just pass 0 in the for the priority instead of CONFIG_ADC_0_IRQ_PRI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We were hard coding the SPI bus name to "SPI_3". Instead we should use
DT_INVENTEK_ESWIFI_ESWIFI0_BUS_NAME as its generated from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was using the straight alias generated defines, however we
want to use DT_ prefixed defines so its clear that the values are coming
from DT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit will take back changes made by previous commit
i.e. fad8ff39c3.
This is beacause k_sleep() based delay is not behaving as
expected while testing & take more time than expected.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The EFM32 Pearl Gecko Starter Kit contains sensors and
peripherals demonstrating the usage of the EFM32PG MCU
family. This patch adds basic support for this board
and is copied from EFM32WG-STK3800.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This ensures compatibility with Silicon Labs EXX32 MCU Series 1.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The Silicon Labs EFM32 Pearl Gecko MCU includes:
* Cortex-M4F core at 40MHz
* up to 1024KB of flash and 256KB of RAM
* multiple low power peripherals
Ported from EFM32WG:
https://www.silabs.com/documents/public/application-notes/an0918.0-efm32_to_efm32jgpg_migration_guide.pdf
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For the EFM32PG12B, the define _EMU_EM23PERNORETAINCTRL_VDAC0DIS_MASK
is not availabe. This commit guards its usage with ifdefs.
This might be a bug in the gecko SDK or some version incompatibility
in the used files.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This includes the Gecko HAL files for the EFM32PG12B SoCs
Origin: Silicon Labs Gecko SDK
URL: https://github.com/SiliconLabs/Gecko_SDK
Version: v5.1.2 (SHA: 938464c68e6c3b2237388a692f767bb0767ec010)
Purpose: Add support for Silicon Labs EXX32 SoCs
License: Zlib
Maintained-by: External
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Some backends may actually contain the same key multiple times so the
code needs to check if there is already a ccc_cfg for an address before
attempting to use one that is unallocated.
Fixes#11409
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If there are no CCC to be stored the value should be set to NULL so it
is properly cleared otherwise calling settings_str_from_bytes will leave
str uninitialized which may cause a crash when attempting to load the
value.
Fixes#11564
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
During firmware transmit timeout, we rely on the pending packet data to
reconstitute the token and token length. At this point the pending
structure may be cleared out due to multiple retries. To avoid getting
a zero token, let's use the token data from the original msg structure
instead.
Signed-off-by: Michael Scott <mike@foundries.io>
