After change 7e302979f3 some
MESH/NODE/NET/ tests would fail because we tried to send a message to a
non-unicast address using the device key. This patch fixes that by
defining and adding an app key for vendor model which is then used to
send network packets for these test cases.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Add unit tests for Direction Finding set of connectionless TX
CTE parameters. Enable DF in nrf52_bsim board.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new testcase to tests/bluetooth/mesh that builds mesh with
extended advertising.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a initial ISO broadcast test case that simply
creates, waits and terminates a BIG using the ll API.
The newly created test directory can be expanded to contain
connected ISO (CIS) tests as well in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG create command in the upper link layer.
Does not yet handle sending any BIS events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Fix maximum Advertising Channel PDU payload size calculation
by including the Common Extended Advertising Payload Format
overload alongwith the AD data maximum size supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the test procedure that requires greater than 31 byte
PDU when AD data and Sync Info structure be present in the
Advertising channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Avoid sending duplicate GAP_EV_DEVICE_FOUND because adv_buf->len was
not cleared.
With this change, the following tests become more stable in a noisy
environment:
- GAP/BROB/OBSV/BV-01-C
- GAP/BROB/OBSV/BV-02-C
- GAP/BROB/OBSV/BV-05-C
- GAP/BROB/OBSV/BV-06-C
- GAP/DISC/RPA/BV-01-C
Co-authored-by: Konstantinos Sotiropoulos
konstantinos.sotiropoulos@nordicsemi.no
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
Disable assert checks, to build a smaller firmware and also
to uncover any unused variables and arguments.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add build only tests to cover Periodic Advertising in
Advertising state and Periodic Advertising in
Synchronization state support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added test implementation for test driven development of
Periodic Sync feature support in the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added conf files to test advertiser, broadcaster, peripheral
and central state/role build combinations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
When added bluetooth over USB shell overlay, the
file was by mistake added with wrong extension.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Fix the structures so that they are compliant with the stricter checks
of GCC 10.x, and at the same time correct a bug that was present in the
handling of the GAP Start Advertising BTP command.
Fixes#28375.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds few tests for handling scan response in ext commands:
- trying to set scan response on non-scannable instance should fail
- it should be possible to create scannable instance, set scan data,
enable and then disable set
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The value of adv_type shall be 0x07 for extended advertising, it will
be converted to 0x05 inside ll_adv_params_set after some checks.
This did not cause any issues with tests since input parameters in
already implemented test cases do not test any code that was skipped
by invalid parameter, however obvious one side-effect is that phy_p
would be always set to 1M regardless of input parameter so any test
case using Coded on primary would fail.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Added tests to update AD data as fast as possible. This test
shall exercise any race condition assert checks in the
Zephyr BLE controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increased sim_length value to 60 seconds so as to meet the
current length of 13.56 seconds and any future test timing
increases in the near future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update bsim test to test Periodic Advertising Enable and
Disable alongwith Extended Advertising Enable/Disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
