Due to HSEM implementation #24862, USB CLK48 lock implementation
#25850 should be reworked.
And by the way, implement the same in entropy which is using the
same clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
* Define USB driver for base stm32wb device.
* Enable USB for the nucleo_wb55rg board.
* Properly initialize USB power + clock for the platform.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_USB* to just USB*.
Also fixup how USB_MAXIMUM_SPEED was defined. We should only define it
if the property exists.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in STM32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert usb_stm32 driver to use of DT_INST macros.
Since driver is compatible with 3 different dt compatibles and
compatible string is included in DT_INST macros, I've kept the
DT_USB_ compatible agnostic macros based on DT_INST ones, which
allowed to remove fixup definitions.
Use of DT_USB symbols is now limited to usb_dc_stm32.
Additionally, compatible "st,stm32-otgfs" is removed from list
of compatibles for usbotg_hs ips.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Previously, endpoint configuration would reserve memory in the packet
memory area which would never be reclaimed. After this patch, endpoints
will reuse previously allocated memory when possible. We still leak
memory when reconfiguration increases the max packet size for a given
endpoint number, but this fixes the common case.
Bug: https://github.com/zephyrproject-rtos/zephyr/issues/23178
Signed-off-by: Josh Gao <josh@jmgao.dev>
On stm32f302/3 series, USB and CAN_1 share same IRQ lines.
To use USB and CAN_1 together, USB IRQ could be remap to other
line numbers, on which there is no conflict.
Remap the USB IRQ lines by default:
-Assign remap number in matching dtsi files
-Perform remap before usb driver init
Additionally, fix compilation issue in usb driver.
Fixes#22343
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Following update of STM32Cube packages for series F0/L0/F3,
a new file ll_usb.h is now available for these series.
As a consequence, specific hanlding is no more requested for this
series is stm32 usb_device driver.
Fixes#21962
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
'enable-pin-remap' is defined as 'type: boolean' in
dts/bindings/usb/st,stm32-usb.yaml, so it generates either
#define DT_USB_ENABLE_PIN_REMAP 1
or
#define DT_USB_ENABLE_PIN_REMAP 0
depending on if 'enable-pin-remap;' appears on the node or not.
Since a macro is always generated, #ifdef won't work. The test needs to
be this instead:
#if DT_USB_ENABLE_PIN_REMAP == 1
(Should be careful with '#if HMZ == 0' though, because it's true even if
HMZ is undefined.)
This behavior was inherited from the old scripts, and some things depend
on it, e.g. by expanding macros in initializers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Low speed isn't supported in device mode for any of the STM32
references.
Remove the code that refer to it.
Fixes#17114
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add __ASSERT() for coverity issue CID: 198874. Assert is used instead
of check since this is callback we get from stm32cube.
Fixes#16573
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Return -EAGAIN on k_sem_take() failure to take write lock, the error
code is similar to nrfx write_in_progress flag.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If the user attempts to send data before the USB connection is
established (see the HID sample for an example of such code), the
DataInCallback never gets called which leaves the write semaphore in a
taken state forever.
Signed-off-by: Josef Gajdusek <atx@atx.name>
The SYSCFG_CFGR1_PA11_PA12_RMP define is present even on packages where
the remap isn't strictly required. This commit makes the remap optional
based on a DT property.
Also fixes syntax error caused by a missing );.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Fix build error when executing sanitycheck on stm32 devices.
Command to execute tests:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <board>
-t usb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
DT_USB_NUM_BIDIR_ENDPOINTS includes EP0, which we should not
take it into account when we check endpoint capabilities
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Convert usb_dc_stm32 driver GPIO disconnect to use new defines so we
can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Fix trailing comment for DT_USBHS_MAXIMUM_SPEED
2. Fix missed CONFIG_USB_HS_BASE_ADDRES that should be
DT_USB_HS_BASE_ADDRESS
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When MSI clock is available and in PLL-Mode (high accuracy), use it as
USB source clock. This allows to enable USB on STM34l475 disco iot
board without having to add external oscillator.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add support for SoF events to the USB STM32 device driver. When
CONFIG_USB_DEVICE_SOF is enabled, enable the corresponding interrupt
and provide a non-weak callback function calling status_cb.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
