Also remove some duplicated dependencies for the related symbol
ENTROPY_NRF5_RNG.
The redundant ENTROPY_GENERATOR deps. are in files sourced within a
if ENTROPY_GENERATOR
...
endif
block in drivers/entropy/Kconfig.
The redundant ENTROPY_NRF5_RNG deps. are due to redundant 'depends on'
within an 'if' in the same file.
Tip: Jump to symbols with '/' in the menuconfig and press '?' to check
their dependencies. If there are duplicated dependencies, the
'included via ...' path can be handy to discover where they are added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The function usart_sam_irq_is_pending (uart_sam_irq_is_pending) return
only the masked value of US_CSR register but it doesn't respect if the
IRQ is enabled or not. For proper function it must check if the IRQ is
enabled for the event.
Signed-off-by: Jiri Kubias <jiri.kubias@leapslabs.com>
Coverity doesn't like that we're storing the return value of
net_buf_findcrlf() near the end of the handler block as "len".
Only to overwrite "len" again once we exit and look for the next
match.
Let's ignore the return value there and also remove the redundant
check for !frag. Either way, we've found a handler, and need to
break the search loop.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12315
Signed-off-by: Michael Scott <mike@foundries.io>
We can't let i == value_size during the loop which gathers characters
for the length. If we do, the next check of "value[i] != ','" would
access memory beyond the value boundary.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12290
Signed-off-by: Michael Scott <mike@foundries.io>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove case ranges from the LP3943 LED driver in order to clean
up GNUisms and make the code standards compliant.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The j iterator is used for priorities, and the i iterator is used for
choosing the actual screening register. Therefore the screening register
availability needs to be checked with i.
This commit also improves the readability by doing two things:
* by moving the screening register index check to a place where the
index is going to be actually used
* by using the ARRAY_SIZE macro instead of a hard-coded number as the
upper limit
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Rephrase prompts for a few options in drivers/spi/Kconfig.nrfx
so that their purpose is presented a bit better.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In Nordic SoCs, SPI and TWI peripherals with the same instance number
share certain resources and therefore cannot be used at the same time
(in nRF91 Series this limitation concerns UART peripherals as well).
This patch adds Kconfig checks ensuring that only one of such mutually
exclusive peripherals can be enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds missing SPI_3_NRF_SPIS Kconfig option (referenced by
`ext/hal/nordic/nrfx_config_nrf9160.h`, although not defined anywhere)
and adds support for SPIS3 instance in the nrfx_spis driver shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Converts the rv32m1 timer driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 pinmux driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 interrupt controller driver to use 'DT_' prefixed
defines instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 clock control driver to use 'DT_' prefixed defines
instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 gpio driver to use 'DT_' prefixed defines instead of
deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
mdm_receiver_send() was sending 1 too many bytes of buf. This ended
up being the NULL terminator. Size should be reduced prior to the
while check so that this doesn't happen.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14001
Signed-off-by: Michael Scott <mike@foundries.io>
When attaching the filters in a way that the filter width dos not change
but the type, CAN_NO_FREE_FILTER was returned when the new filter is at
the end. Also shifting is not necessary when the start is already out
of bounds.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Allow for the MSI to be auto-cal'd via an LSE when enabled, even when
being used as a source for the PLL as the sysclock.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
This value always comes from DTS. No Kconfig symbol named
NS16550_REG_SHIFT ever existed.
Might've been missed in commit 603f068690 ("uart/ns16550: Use DT_ prefix
for remaining device configs").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to the Coverity issue 188890 (github issue #10705)
Fix for overflowed or truncated value count-1U used as return value.
I decided to use a saturating subtract to avoid a vulnerability.
It will always return 0 or bigger value according to the conditions.
Now if count value is 0, function will return 0, not -1 as before.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
The SimpleLink driver has been defining these macros for its local use.
Given these have been defined in a recent commit in Zephyr
(9c86dbfd8e), we should now avoid
redefining them to prevent build errors.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The driver was using non-'DT_' prefixed defines which are deprecated.
Move to using proper 'DT_' prefix defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove redundant dependencies on the PWM symbol (which show up as
PWM && PWM in the documentation). The 'source's in
drivers/pwm/Kconfig are already within an 'if PWM' block.
- Turn some repeated 'depends on FOO' into 'if FOO' blocks.
- Turn some 'if FOO's that surround a single symbol into
'depends on FOO'.
'if FOO' is equivalent to adding a 'depends on FOO' to each symbol
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The feature that used this symbol was removed in 18b07e09e0.
This is just a cleanup commit that removes the unused symbol.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Fix#13746
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Repalces send fifo_fill implementation with poll_out,
this makes the receiver usefull on most SoC.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Rearranges functions to public and private groups,
and adds missing function comments.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
Log possible uart device binding error and change
the error type to a more correct one.
Signed-off-by: Georgij Cernysiov <g.cernysiov@elco-automation.de>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Console subsystem doesn't depend on older consoles-in-drivers, the
only common thing between them is CONFIG_UART_CONSOLE_ON_DEV_NAME
setting, so make it so (by depending on either UART_CONSOLE or
CONSOLE_SUBSYS.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Potentially overflowing expression 1U << register_demand
I changed to (u64_t)1U << register_demand
To avoid overflow, I casted 1U to type u64_t.
Coverity-CID: 190996
Fixes: #13829
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
The newer series of timer drivers will compare counters vs. the last
tick boundary to compute a number of ticks to announce to the kernel.
In the case of CONFIG_TICKLESS=n, this actually represents a change of
behavior from our old scheme where "ticks" always reflected the number
of interrupts received.
The distinction only matters when an interrupt is delayed more than a
full tick, of course. But that actually makes a difference to some
timekeeping code. Restore the old behavior.
This also has the benefit of further reducing code size when !TICKLESS
and improving performance of the ISR by removing the division
(remember Cortex M0 has no hardware divide!).
Fixes#12409
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
