The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Looking back at the current INPUT_LISTENER_CB_DEFINE api naming, it
feels like it's a bit overloaded. Rename it to a simpler
INPUT_CALLBACK_DEFINE.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the GT911 driver to the input subsystem, fix the existing boards
to work in the default config.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the XPT2046 driver to the input subsystem, change the api,
remove the callback and enable logic.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add call to zephyr_syscall_header to kscan driver CMakeLists.txt, so
that the required syscalls will be generated when kscan drivers are
used.
Fixes#59710
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert the NPCX keyboard scan driver to the input subsystem and add the
input to kscan compatibility driver to maintain functionality with the
current API.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
To reduce the interrupt latency of MIWU events, the driver prepares a
dedicated callback function item list for each MIWU group in this PR. We
needn't check the MIWU table and group of the event in ISR. And the
maximum item number of each list is also limited to 8. After applying
this PR, the interrupt latency reduces to ~10us consistently.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Ignore touch events from GT911 IC when TOUCH_STATUS_MSK bit is not set
in status register. This resolves an error where the GT911 driver would
report a touch event end directly after a touch occured, as the touch
status register would be 0x0, which the driver incorrectly interpreted
as a touch release.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The Microchip XEC platform always uses pinctrl, there's no need to keep
extra macrology around pinctrl. Also updated driver's Kconfig options to
`select PINCTRL`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Convert the SDL driver to use the input subsystem. This is specifically
meant to emulate touchscreen drivers, so it's setup to send triplet of
x, y, touch for touch-on events and just touch off on touch off events.
Renamed the driver to input-sdl-touch since now we can also develop an
sdl driver for simulating key events.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert the ft5336 to the input subsystem, fix all the config in the
repository and add the Kscan compatibility driver to the current dts
driver instances.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a driver that listens for input events and reports them on a kscan
API. This allows porting kscan drivers to the input APIs while
maintaining compatibility with the existing kscan based applications.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add driver for Xptek XPT2046 resistive touch controller on SPI.
Only interrupt driven mode supported, does not do polling.
Signed-off-by: Seppo Takalo <seppo.takalo@iki.fi>
Fix support for GT911 touchscreen driver when not using interrupt.
The controller still requires that the INT pin be set to input in
order to correctly respond to I2C queries.
Also, the GT911 requires that the INT pin is not configured until the
RESET pin has been low at least 10 ms after reset, so add an additional
delay during initialization to account for this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update the calculation of the row and column.
Issues were seen when running the LVGL sample.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The note refers to the wrong API, that has been replaced by a pinctrl
call, update the comment.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
* Utilize DT_HAS_<COMPAT>_ENABLED for devicetree based drivers
* Move to using select I2C' instead of 'depends on'
(see commit df81fef944 for
more details)
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1.Declare the member type to match the kscan_it8xxx2_regs, so
we needn't to transform the local structure in the function.
2.Stop using DRV_CONFIG, DRV_DATA, DRV_REG macros.
3.Delete unused register defines.
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We're now using the Kconfig copied from the upstream lvgl repository. It
uses the LV_ prefix for all options while we're using LVGL_ for
Zephyr-specific ones. Make the latter consistent with upstream but also
make sure they're distinct from lvgl's by using LV_Z_ as the prefix.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Use the IF_ENABLED macro helper to conditionally initialize the int_gpio
field. This avoids duplication of initialization code.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add kscan0 to support tests/driver/kscan/kscan_api.
When running the tests code on it8xxx2_evb, it shows fatal
error: IRQ is enabled. We find that once polling_task() is
created and executed, the KSI interrupt will be enabled and
before we call irq_connect_dynamic(), so we switch both
function sequence.
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Convert the keyscan portion of the Holtek HT16K33 driver to adhere to
the kscan API instead of the GPIO API.
When this driver was introduced the kscan API was not present. The
keyscan driver was therefore implemented as a GPIO interrupt driver.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Make kscan init priority higher, since it is lower than some buses like
I2C, making some devices to fail initialization if not tuning
priorities.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
