Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using winc1500 WiFi driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Set NET_CONTEXT_CONNECTED when stream socket got connected. This fixes
TCP connection when using ESP WiFi driver, which got broken after
sockets layer started to validate net_context connection state before
allowing to receive any data.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Flash controller support is not yet ready on M4 core.
Remove the chosen declaration to make it clear.
Additionally, generate a build error if this driver is compiled
on M4 core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes#29831: Implements flash driver for stm32h7 devices.
The driver is independant from the other stm32 families (flash_stm32.c),
only the header interface is (mainly) common.
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Add a new test for k_busy_wait and cpu_hold
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
In native_posix and nrf52_bsim add the cpu_hold() function,
which can be used to emulate the time it takes for code
to execute.
It is very similar to arch_busy_wait(), but while
arch_busy_wait() returns when the requested time has passed,
cpu_hold() ensures that the time passes in the callers
context independently of how much time may pass in some
other context.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When tickless mode was disable, sys clock timeout handler was calling
public API function for setting new compare value. Public API function
asserts when chan 0 is used which is reserved for system clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added clearing of CC event which may occure due to previous
CC value which was closed to current counter value.
Fixed int_mask initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Convert entropy drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes the fxas21002 sensor driver to provide gyro channel data in
radians/sec instead of degrees/sec.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix TIMER0 and RTC0 being selectable when using out-of-tree Bluetooth
controller.
Generalize the Kconfig to have the features that use the HW peripheral
select them as reserved to make the dependencies more manageable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert gpio drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put everything inside an if, we should not see anything related to
uart_mux in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The GIC interrupt controller driver is using a custom init function
called directly from the prep_c function. For consistency move that to
use SYS_INIT.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Convert watchdog drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The cc13xx_cc26xx driver uses "inst" so we need to use
DEVICE_DT_INST_DEFINE instead of DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The spi_nrfx_spis driver uses nodelabel so we need to use
DEVICE_DT_DEFINE instead of DEVICE_DT_INST_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert adc drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert pwm drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add weak function to check flash configuration.
On stm32g4: single bank configuration not supported
when dual bank capable.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Remove hardcode bank1 page limit (128) which is not always valid
(not valid for soc stm32g474rct)
Manage bank1/2 discontinuity when flash is Dualbank and
flash size is lower than 512K.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
When flash is Dualbank and flash size is lower than 512K,
then there is a discontinuity between bank1 and bank2.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move users that are DEVICE_DT_DECLARE(DT_DRV_INST(n, ...)) to
DEVICE_DT_INST_DECLARE(n, ...) and similar for DEVICE_DT_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to prevent user turns on the pin-mux of devices has io-pads
unexpectedly, this CL added a new device definition for host uart
device. The pin-mux of host uart interface is enabled only if we set its
status as "okay" in dts file of board folder.
The following npcx7 drivers will meet:
1. Default status property of npcx devices with io-pads such as espi,
pwm, uart, host uart and so on should be "disabled".
2. Switch pin-mux by changing status property to "okay" in dts file of
board folder.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL replaces all DT_ prefix with NPCX_DT_ for all macros used
for providing npcx device information in soc_dt.h It avoided the
ambiguity with the DT_ prefix for system DT macros/defines.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Prevoiusly there is no network interface for mcp2515 driver.
This is solved by calling the NET_DEVICE_INIT macro in mcp2515 driver.
fixes: #30432
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
It's disabled by default. When enabled, and if the device exposes both
MSI and MSI-X capabilities: MSI-X will be selected and MSI disabled on
the device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such interrupt remapping controller may be found along with Intel VT-D
hardware. Its base-address is via ACPI, and it enables up to 64K
interrupt indexes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This enables software MSI "multi-vector" feature, letting the user to
register an isr handler per-MSI message.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though it was noted that pcie_get_cap() is only used by MSI code so far,
there is no need to put it in msi code. If unused, linker will nuke it.
So let's move things to where it belongs to.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for transmission modes that send a packet
at a specific time in the future.
Remove TXTIME, TXTIME_CCA, CSMA_CA capabilities and their calls when
they are not supported by selected drivers. Add TXTIME flag in
get_capabilites function.
Signed-off-by: Maciej Fabia <maciej.fabia@nordicsemi.no>
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
Previously, when opening the Bluetooth driver on the app core of
nRF53, the application could hang forever. This would happen if
the network core was not flashed or flashed with the wrong firmware.
This commit improves the user experience timing out if the net core
is not replying. 3 seconds is considered to be more than enough to boot
the network core.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
