This creates proper links and removes undefined link warnings.
Change-Id: Id8c4cc4279114cab05ed8ad3f7da24f7ce673e8d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This allows us to cross ref from code with :option:`CONFIG_XYZ`
generating a useful link and avoiding an 'undefined target` warning.
Hyperlink using :option: instead of :ref:.
Change-Id: I6cc0daec012dfcca504faa47d591885e69c8e521
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When we are specifying some kind of option that we are not
documenting, we shall not use :option:`xx` as it will generate a
warning. Thus, use ``xx`` in its place (or *xx* in others) as needed.
Not all converted, as others make sense to move from xx to CONFIG_xx,
which will be handled separately.
Change-Id: I98d5e70da471184f99bb491b1fa1a3b7086019d2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Pass -q to sphinx-build so it only prints what is wrong, not a huge
list of progress information that in most cases is not necessary.
Note that this can be overriden from the environment.
Change-Id: I8735e7ad9a2998734d4e9dda9b3e826ce07b5527
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- :option:`XYZ` can only be used if there is an .. option: XYZ
definititon somewhere; replaced with a more generic monospace
``XYZ``.
- Fixed broken link to 'Creating and Configuring an MDEF File for a
Microkernel Application'.
Change-Id: I2b1e862415035500c00dcce0a33d14bac4126044
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Four code snippets fail to be properly recognized by the code
highlighter; the makefile snippets seem to be because of the $
character (and I have found a way to escape it out). The C code, I
haven't been able to find out why.
Killed the warning by setting the code-block style to 'none' on all of
them. It is not the best sollution, but it beats a polluted build
process.
Change-Id: I8fa7d327354a93bacad40e25596c9dbaf9ea1e92
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Files had been changed without the offsets being updated, so it was
generating warnings.
Change-Id: I5c7756f396cf607470da1ce6c5807e5a343491d2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add missing '*/', rename <entity> to ENTITY and fix indentation so the
formatting engine recognizes the example code as C code.
Change-Id: Iff1b5c0cef5bb635ba1b39f507ff657e9ab4c338
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
To fix, insert the synchronous_calls.rst file inside drivers.rst; they
are both small enough. Plus, none was calling that link anyway.
Change-Id: Iba2027d143cb29497431cb47dfbcf0435087f1ae
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Warnings about duplicate label (_about_zephyr) crept up because of the
way the about_zephyr document was included in the index. This is a
short document, makes sense to have it as part of the index.rst; it
removes clutter from the directory as well as the warning.
Change-Id: Ifdc3a93fb4316be4aef685257d14749769443b41
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
A warning was generated for the TOC entry "About Zephyr", which was
missing; replaced with a link to said section (to reduce clutter in
the document).
Change-Id: I1f879bc21bad8ec857781208ad9e31079015292a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This removes warning about duplicate symbol (of _coding_style, due to
the inclusion) plus also a very short file which can be very well
inside conventions.rst.
Change-Id: I7b8467a0a845225a4fe4356f012f60ab0ea202aa
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It was too short a file, it was causing duplicate link warnings
(_error_code_conventions, due to the inclusion, which wasn't being
used anyway).
This removes the littering of small files and removes warnings from
the documentation compile.
Change-Id: Ic6f225a63d875d77bd2e93b2712baabea2eb0141
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Files that are included directly into other files are not referenced
in TOC trees. Quiet warning by tagging them :orphan:
Change-Id: I3a975420ce366ca155e8c0158dcd0fb7c094a4a0
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add a blank line in most places is the fix needed, to have the
formatting engine recognize it properly.
Change-Id: Iccaa0e51146b1e2c138e89ab1dd0067fc1409e4d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Seem embedding a `code-block` in a `note` section is not working that
well.
Change-Id: I6a0ad0b5a17b2fc1cb9968a85dc794c53a1e27ac
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The "IDT Security" section was removed since the IDT is now always
in a read-only region; dynamic IRQs have been deprecated and will
be removed from the kernel.
Change-Id: Idbb7ff987bbb4f777b524d87690485d34f372d43
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
D2000 is shipped with no ROM, advise on how to install one.
Change-Id: I848bb0b4fa2d6972cc6919d69a11e14dee0ce50c
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The unicode characters for trade mark and register trademark,
although understood by the Atom editor, apparently don't work
here. :-(
Change-Id: Ifbdb25a015630fc90afb18aec6f07a8724fc37f7
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Improve this doc to use register trademark and trademark unicode
symbols.
Further, the make rules can benefit from also being passed the argument
ARCH=arc. I see that some zephyr tests use ARCH to select a prj.conf file.
Change-Id: I0650e5d5aba10aa984ebd0be21d0b381dd96dd56
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The dependencies for the HCI firmware are now part of the latest
stable MyNewt release, so special editing of project.yml is no longer
needed.
Change-Id: Ia3658ab1da03e208cd5230e0cda4c96a4628e8f0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If you pass arduino_101_factory, it expects a directory with that name,
but really the directory arduino_101 contains the factory config.
Change-Id: I12ce11c0e32a9d50998b52c2e2c16780b6ce00da
Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Marketing is telling me to switch URLs for the EM Starter Kit
board story.
Change-Id: I342849d1085330eb9e5e88f08374bb5889695702
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Correct the indentation of numbered lists to
appear correctly once render.
Change-Id: Ie1b92a7c5d2517e4f36626858404458c3b461be9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Generate kernel image in Intel Hex format when building for the nRF52.
Remove the additional step from the board doc file.
Change-Id: I619496f64037c2a0ac459ae05e549e01458e0f71
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Few lines in the doc were out of sync with the code base.
Jira: ZEP-312
Change-Id: Ic0d3508f0f903e43000e17b4a32c1280ae0978dc
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Board support for the ARC EM Starter Kit provides for a board
that can select one of two SOCs. The EM9D and EM11D commits
will be done separately to expidite review. Also submitted here
is doc/board/em_starterkit.rst to explain details about this
Zephyr board choice.
Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Fix a few small (mainly rendering) issues with the arduino_101.rst
document:
- A few paragraphs had the wrong indentation
- A sub-list did not appear as such (serial port settings)
- Remove the 'Bibliography' section which appears empty
- Fix IO-3 and IO-5 pin names in note
Change-Id: I60ad839de1901167b6793254186836015502aaab
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
