Add dts binding and info for RNGA device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have DTS support for an entropy driver we should get the name
generated from DTS ('label' property on the entropy device node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix RCOSC calibration initiation to ensure LF clock is
running; and the HF clock is running with crystal before
triggering the actual calibration in ISR.
Fixes#10811.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert gpio_cc32xx driver over to using device tree. Added binding
files, updates to dts for various SoCs that use cc32xx.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for LSM303DLHC accelerometer now supports API function
sensor_attr_set for attribute SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Dennis Wildmark <d.wildmark@gmail.com>
Add basic 'lspci' command to list PCI devices. This command can be
enabled with the new Kconfig PCI_SHELL.
Example:
uart:~$ lspci
0:1 8086:7010 class: 0x1, 1, 4, I/O, addrs: 0xC000-0xC00F, IRQ -1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If data is received before an IRQ handler was set and enabled,
hardware sets the ORE flag. Once set, the IRQ routine starts
hogging the CPU until ORE is cleared. This change will clear
the flag when user code attempts to drain incoming data.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Added bidirectional I2S support for Intel S1000
- Added implementation for I2S receive mode
- Extended driver instances to support 3 I2S ports
- Added DMA channel mappings for upto 4 I2S ports
- Utilized k_msgq to track buffers through the driver
- Allocate buffers for audio reception in the driver
- Free buffers after audio transmission in the driver
- Perform buffer reload for DMA after every reception/transmission
- Removed unused Kconfig variables
- I2S_CAVS_TX_BLOCK_COUNT
- I2S_CAVS_RX_BLOCK_COUNT
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added a mechanism to refresh DMA buffers without the
need to call the "configure" API every time.
The reload is done after every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since CCOMPARE* registers have undefined values after reset,
set compare value first before enabling timer interrupt.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the uart_miv driver to get params like name, addr, baud-rate,
clock freq from DTS generated defines. Fixup related board and soc code
as needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DTS changes introduced in 7ae220c845
changes the naming of GPIO related macros. This updates the usage
of previous macros via DTS fixup.
Fixes#10993
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix misspellings in Kconfig files that show up in the configuration
documentation (and make menuconfig screens).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding watchdog driver for sam SoC. The current implemntation just
diables the watchdog on device boot.
This PR adds the following support for SAM3X, SAM4S and SAME70
1. Activate processor reset
2. Activate all reset
3. Generate interrupt on watchdog timer expiration.
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are two asserts in the ISR for clock events on the nRF5 that
appear to be accidental.
The first assert fails if there are any LF clock started events, which
there will be when starting up the RC oscillator with calibration.
The second assert fails when we decrement the refcount on the HF
oscillator after finishing a calibration. There will typically be
users left of the HF oscillator, so _m16src_stop() doesn't actually
stop it and thus doesn't return 0.
This code typically works fine because it's not built with asserts
enabled by default. Can be reproduced on a BBC microbit with the
default config plus CONFIG_ASSERT=y.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Since the mb_display driver is specific to the microbit we can move
the GPIO pin defines from board.h into the driver. This lets us remove
one of the few remaining drivers that is including board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Macro is used to create contiguous bitmask between the
arguments passed to the macro.
BITS_PER_LONG is computed as the multiplication of predefined
macros `__CHAR_BIT__` and `__SIZEOF_LONG__`.
Both gcc and clang support these predefined macros.
With this change, replace the redundant defintions of
GENMASK with the new generic macro available.
Fixes#10843
Suggested-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The dma_tx_callback() function signature is different than the one
required by struct dma_config. So change the signature to fix
a compiler warning.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As RTT is used by more subsystem in Zephyr, initialization is moved
from RTT console and RTT logger backend to common kernel init phase.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This commit fixes the issue with non-default max packet size (<64).
The max packet size value was not passed to low-level driver
in norfic hal (nrfx_usbd) causing 64-byte being send regardless of
configured endpoint size. Size mismatch results in communication
error on Linux hosts.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Check the return value of i2c_reg_read_byte() and return
if unable to read the register
Coverity-CID: 188740
Fixes#10585
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
This commit introduces usage of likely()/unlikely() macros in order
to speed up the entropy_get_entropy_isr() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit optimizes access to device data using direct reference
instead of relying on the driver_data field in the device structure.
Such approach saves few cycles on time-critical paths.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The old algorithm managing random number pools was inefficient and
prone to race conditions. Moreover, its behaviour was not compatible
with the API (provided buffers were filled from the end, leaving
beggining of the buffer untouched if there was not enough random data).
The new implementation is a bit faster and it is race-free as long as
all callers of the entropy_get_entropy_isr() are executed in
"run-to-completion" mode.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the argument passed to ISR to the pointer
to device data structure, removing one dereference in the interrupt
handler.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commint replaces function names by more accurate ones.
For example, the isr(), was renamed to rng_pool_put(), which
clerarly indicates what this function is doing.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf5_get_entropy_isr(..., ENTROPY_BUSYWAIT)
unconditionally started and stopped hardware random number generator
disrupting management of random data pools implemented by the driver.
Moreover, simultaneous call to mentioned function from different
priorities led to hangup of lower priority call as hardware was
stopped by higher priority call while the other one waited for data.
This commit solves mentioned problems by moving the responsibility
for stopping hardware to the interrupt handler. As result hardware
is stopped only when there is no blocking calls to the
entropy_nrf5_get_entropy_isr() as well as all random data pools
are full.
This commit also fixes interrupt management in the mentioned
function, as previous implementation unconditionally enabled
interrupt causing problems similar to the described above.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Neither entropy_nrf5_get_entropy_isr() nor isr() protected
access to hardware. As result in some situations a random value
could be "stolen" by a higher priority call interrupting one
of the mentioned functions.
This commit solves this problem by introducing random_byte_get()
which accesses hardware atomically.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The nrf_rng HAL uses barriers on SoCs which need them to ensure
that all register writes will reach the peripheral immediately.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
