Adds an #elif for ESP32 boards. Connect a wire from pin IO2 to pin IO4
so that the test can be executed.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The size of the interrupt descriptor table is not really
relevant to this test.
If any driver enabled for the target board gets enabled and
has a priority level outside the IDT range, gen_idt.py is properly
reporting an error. The old C-based gen_idt seems to have allowed
this to slide by.
Issue: ZEP-2496
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The `z` vector was not initialized in the call to
uECC_vli_nativeToBytes(), resulting in undefined behavior. Use the
properly initialized `exp_z` array instead.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The array of k_thread "t" was declared non-static in 2 different
C files. Make them static.
Semaphores only used in local C file now declared static.
Use of variable 't' in thread_tslice() no longer shadows global
definition.
Fixes build errors with XCC compiler.
Increase RAM requirement to 20K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since Extended Scanner Filter Policies is an independent feature from
Controller-based Privacy, split it out so it can be built independently
and included without it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This adds a test that attempts to submit a work with 0 timeout thus
causing it to immediatelly be submitted to the queue so it is pending
execution which is then cancelled with k_delayed_work_cancel.
Note this can only be done with coop threads with the same or higher
priority otherwise the work_q thread is wakeup before
k_delayed_work_cancel takes place, thus why test_delayed_cancel uses
K_HIGHEST_THREAD_PRIO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This has been a limitation caused by k_fifo which could only remove
items from the beggining, but with the change to use k_queue in
k_work_q it is now possible to remove items from any position with
use of k_queue_remove.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of POLL_EVENT in case k_poll is enabled which is
preferable over wait_q as that allows objects to be removed for the
data_q at any time.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Right now we have various type conflicts between the json library and
newlib. Until these are resolved only build the json test if newlib
isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Previous stack definition caused following warning: passing argument 2
of 'k_thread_create' from incompatible pointer type.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
* add nested interrupt support for interrupts
+ use a varibale exc_nest_count to trace nest interrupt and exception
+ regular interrupts can be nested by regular interrupts and fast
interrupts
+ fast interrupt's priority is the highest, cannot be nested
* remove the firq stack and exception stack
+ remove the coressponding kconfig option
+ all interrupts (normal and fast) and exceptions will be handled
in the same stack (_interrupt stack)
+ the pros are, smaller memory footprint (no firq stack), simpler
stack management, simpler codes, etc.. The cons are, possible
10-15 instructions overhead for the case where fast irq nests
regular irq
* add the case of ARC in test/kernel/gen_isr_table
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tests if preemptive threads are picked up as per priority.
This creates 10 threads with priority in increasing order
from 1 to N and each thread prints an Alphabet.
This test fails when threads are picked up out of order.
Jira: ZEP-2370
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This creates 10 threads with equal priority and tests predictibility
of picking all threads in round robin fashion. Test fails when any
thread consumes more time than time slice allocated to it or threads
are not scheduled in round robin fashion.
Jira: ZEP-2371
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 1024
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- added CONFIG_ZTEST_STACKSIZE=320
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 896
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced the size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
shell_exec expects a string that is null-terminated but if line passed
to strncpy is equal or bigger than the buffer it will not produce a
null-terminated command.
Jira: ZEP-2474
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Print the entire memory areas of interest on error, instead of
stopping at the first null character.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This includes files for both polled and IRQ-driven I/O. The log level
is deliberately kept to ERROR to try to shake out any timing-dependent
bugs which go away with extra logging.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
k_thread_cancel() is replaced with k_thread_abort() because
k_thread_cancel() is used to cancel threads that have not started yet.
Canceling asynchronous thread was returning an error.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- sha256.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- mbedtls.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
