Pattern drivers/bluetooth/hci/hci_silabs_* can be replaced by
drivers/**/*silabs*. Thus, it is no more required to have a specific
case for bluetooth drivers.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Usually, drivers for siwx91x are named "silabs_siwx91x". However, there
are a few exceptions:
- **/Kconfig.siwx91x
- drivers/wifi/siwx91x
Let's ensure the reviewers for these files are properly assigned.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Remove two out of date/incorrect notes in the documentation for this
board:
For quite a while now, we have models of some parts of the CRACEN HW.
Since f4cdb0f07e we are using the CRACEN
RNG driver.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This board is using since f4cdb0f07e
the cracen RNG driver, so there is no need to set default options for
the native_posix entropy driver.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Increase value of `CONFIG_BTTESTER_BTP_CMD_THREAD_STACK_SIZE` for
nrf54L15 board to avoid stack overflow.
Remove the config in the Mesh overlay as it's was also added for nrf54L15.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Remove redundant descriptions in MBOX bindings, such
as "This is a representation of", "... node" and "... binding".
Signed-off-by: James Roy <rruuaanng@outlook.com>
Frees ram region on the frdm_mcxc242 to allow
usb samples to run on this platform due to the
constraint of 16KB ram space for this platform.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Fixes several adi boards that incorrectly used pinctrl flags instead of
gpio flags in their devicetrees. For max32662evkit and max32672evkit,
the flags are removed entirely because these socs don't support gpio
voltage selection.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Fix few printf format warnings when building for
mpfs_icicle/polarfire/e51. PRIdPTR for the pointer difference, %zu for
size_t.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Default to SPI_NOR_SFDP_RUNTIME for the board so that it can build the
spi-nor driver without triggering the build check for:
jedec,spi-nor jedec-id required for non-runtime SFDP
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Since the RA2L1 uses the macro "ICU_EVENT" instead of
"ELC_EVENT" (which is currently used) to input into
the IELSR register, the ek_ra2l1 board cannot assign
any interrupts for any driver.
This commit aim to correct the Event macro to input correct
value for IELSR register on all the Renesas SoC by using
"BSP_PRV_IELS_ENUM" macro.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Fix end time capture be on radio event end irrespective of
direction finding support. Let the timer clear use radio
end or radio phy end, for no direction finding or direction
finding support, respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix single timer use end time capture from being disabled
as end time and timer clear use the same PPI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix active mode extended scanning assert raised when calling
radio_tmr_start_us() due to stale radio_tmr_end_get() value.
Active mode extended scanning did not drop reception of
ADV_EXT_IND PDU when setup to receive ADV_SCAN_RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Setup logging per process to fix issue on both mac and windows where
handlers are not available to the processes.
Fixes#86237
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix BT_CTLR_LOW_LAT_ULL dependency after changes in
commit 5119896c7d ("Bluetooth: Controller: Fix
BT_CTLR_LOW_LAT_ULL conditional code").
BT_CTLR_LOW_LAT_ULL is independent of BT_CTLR_LOW_LAT, where
the later prevents any ULL execution inside a radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Activating the Python environment on Windows can be done in a regular
command line prompt, or in powershell. But the activation script is
different.
Add a code tabs to include the powershell alternative.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This updates the documentation of all the ITE Tech boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the ENE Technology boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Cypress boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the EnjoyDigital boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Seagate boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the lowRISC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the UP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a notice to the 4.1 release notes that CONFIG_PIPES k_pipe
implementation is deprecated from 4.1.
Signed-off-by: Måns Ansgariusson <Mansgariusson@gmail.com>
We need to track the self-powered status of the device independently of
the D6 bit in the bmAttributes value of the configuration descriptor
because the Get Status request about the self-powered status is valid in
address state and we support multiple configurations.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The day alarm was not being set correctly. The day alarm should be set
using the WADA bit in the control register. This patch fixes the issue
by setting the WADA bit in the control register when setting the day alarm.
Signed-off-by: Måns Ansgariusson <Mansgariusson@gmail.com>
Enhance the zephyr_file link role to support referencing specific lines
or line ranges in files.
This change allows users to link to exact locations within a file
using GitHub-style line references.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit alignes the timeout value for allocating buffers within att
on the BT RX thread, making it consistent within att.c, see
bt_att_req_alloc.
We are inferring in many bt_gatt_* functions that if called from a BT RX
thread (which is inherently the case if called from a callback when
running a Bluetooth application), we don't block and instead return
-ENOMEM when the ATT request queue is full, avoiding a deadlock.
This promise is fulfilled within bt_att_req_alloc, where the timeout for
allocation of the request slab is set to K_NO_WAIT if we are on the BT
RX thread. Unfortunately, we break this promise in
bt_att_chan_create_pdu, where the timeout for allocation of the att pool
is still K_FOREVER and deadlocks can (and do) occur when too many
requests are sent yet the pool is depleted.
Note: Both req_slab and att_pool sizes are defined by
CONFIG_BT_ATT_TX_COUNT. If applications start getting -ENOMEM with this
change, they were at risk of such a deadlock, and may increase
CONFIG_BT_ATT_TX_COUNT to allocate the att pool for their requests.
Note: This possible deadlock has been flying under the radar, as
att_pools are freed when the HCI driver has sent it to the controller
(instead of when receiving the response, as it happens with req_slabs)
and due to the att_pool and the req_slab being both sized by
CONFIG_BT_ATT_TX_COUNT, and req_slab being allocated before and
returning -ENOMEM already if there is no space, it takes a more specific
situation to deplete the att_pool but not the req_slab pool at this
point.
Note: Ideally, we don't want functions to behave differently depending
on which thread they are running, and while this commit makes it more
consistent, it should be considered a workaround solution.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Add logging of the values that cause LOG_ERR statements.
This makes it easier to debug any issues that occur.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The gatt docs are very sparce, this commit adds imrpovements for the
GATT server API part. Others will follow.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Commit c910dc81a614("sys_clock: header: minor cleanup and doxygenization")
introduced a typo in the documentation comment above NSEC_PER_USEC. Fix
that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- adds ability to change the ZMS sample MAX_ITERATIONS
and DELETE_ITERATION parameters via Kconfig without manually
modifying the source code.
- adds ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Reintroduce the fast path that skips reconfiguring if we use the same
configuration, this fixes regression that causes a lot of latency at the
start of repeated transfers. Unfortuantely need to find alternative
workaround for S32K3 in order to do this instead of module reset, so
disable skipping for that platform.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
On some platforms, the module is not getting clocked until call to
LPSPI_MasterInit, this will be fixed soon with upcoming update to native
driver and will clock the module in driver init instead of start of
transfer, but for now, move this code within the condition check that
already exists for this purpose.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
