Some function *typedefs* confuse the *Sphynx* / *breathe* parser [see
the patch for full details]. Implement a workaround (defining the name
with @typedef), add workaround documentation and file a bug with the
sphinx/breathe developers.
Change-Id: I7f3dba4a53d0cc73e12f02511a5f85526f357b5f
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Sphinx's parser gets all confused; add a workaround using @fn,
document the workaround in the contribution section; bug filed with
Sphinx for a permanent sollution.
Change-Id: I0200add092da27206b9d006bb13110c4cc37d0e4
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The problem is doxygen's parser is getting confused by constructs as:
static inline __attribute__((always_inline))
void sys_out8(uint8_t data, io_port_t port)
{
_arc_v2_aux_reg_write(port, data);
}
Too many words at the beginning of the function definition. So change
to use the macro ALWAYS_INLINE (which is already defined to mean
'inline __attribute__((always_inline))`.
Kills:
sys_io.h:37: warning: documented symbol `static inline void sys_out8' was not declared or defined.
sys_io.h:47: warning: documented symbol `static inline uint8_t sys_in8' was not declared or defined.
sys_io.h:58: warning: documented symbol `static inline void sys_out16' was not declared or defined.
sys_io.h:68: warning: documented symbol `static inline uint16_t sys_in16' was not declared or defined.
sys_io.h:79: warning: documented symbol `static inline void sys_out32' was not declared or defined.
sys_io.h:89: warning: documented symbol `static inline uint32_t sys_in32' was not declared or defined.
sys_io.h:120: warning: documented symbol `static inline int sys_io_test_bit' was not declared or defined.
sys_io.h:133: warning: documented symbol `static inline int sys_io_test_and_set_bit' was not declared or defined.
sys_io.h:146: warning: documented symbol `static inline int sys_io_test_and_clear_bit' was not declared or defined.
sys_io.h:161: warning: documented symbol `static inline void sys_write8' was not declared or defined.
sys_io.h:171: warning: documented symbol `static inline uint8_t sys_read8' was not declared or defined.
sys_io.h:182: warning: documented symbol `static inline void sys_write16' was not declared or defined.
sys_io.h:192: warning: documented symbol `static inline uint16_t sys_read16' was not declared or defined.
sys_io.h:248: warning: documented symbol `static inline int sys_test_bit' was not declared or defined.
sys_io.h:261: warning: documented symbol `static inline int sys_test_and_set_bit' was not declared or defined.
sys_io.h:274: warning: documented symbol `static inline int sys_test_and_clear_bit' was not declared or defined.
Change-Id: Id10e9b6cd44a370ccc732c17b23fb66bd1845205
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the application can control the maximum duration of the
Inquiry. The value 0x00 (which is invalid for HCI) is still accepted
for backwards compatibility and gets mapped to the old hard-coded 0x30
value.
Change-Id: Ibc9eb86bbb6c9e45b7b351278517b4a688015195
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current language is a bit confusing, reword it in a clearer way.
Change-Id: Iaf2d29ab838cf2c5f50d7f2bdb2cdfa83c9a44c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the APIs don't dangle on their own under the master Bluetooth
group but are nicely behind a subgroup like everything else.
Change-Id: I608b6019e970db86a1bcdb29f0a52ce4a3165fbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These prevent the documentation from being included in the generated
doxygen output.
Change-Id: Iffe38c15055b8283d4b9f16b1c830c9f269ba6e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added sphynx comments required to link C code comments to rst
documentation, additionally a new rest page with the list of
current system log Kconfig options and an example.
Change-Id: I9d1370b5f0a2fbd858de83befb99f0f4c7024a13
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-153
Introduce the family of nano_fifo_put_list and nano_fifo_put_slist APIs,
which allow queuing a list of elements on a nanokernel fifo in one
shot. When called from an ISR or a fiber, the behaviour is not really
different than calling nano_fifo_put for each element to enqueue.
However, when called from a task, it allows the task to enqueue the full
list without yielding to fibers that were waiting on the fifo.
All fibers currently waiting on the fifo will be awakened and given an
element from the list in their order of priority. When some elements are
not matched with a receiver, they are queued normally.
There are two ways of passing a list: with either an ad-hoc queue, by
passing the head and the tail elements, or with a sys_slist_t object.
For the latter, the object must be reinitialized afterwards.
Change-Id: I6ac077f556dc39995191e9149c4a047a3433826f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
We will require 6 variables to be defined by SOC-specific
linker script; these values in turn can be pulled from
defines in layout.h.
To help position code correctly we define two new ELF sections
for this arch, 'reset' and 'exceptions'.
Change-Id: Idffbd53895945b7d0ec0aac281e5bf7c85b4b2c2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header was pulled in verbatim from Altera HAL and had
some style and naming issues. The inline functions or macros
which read registers can now be used in expressions.
Change-Id: I7a463717051efd2f9dd36e8a84d357852fbf9215
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header defines BT_BUF_USER_DATA_MIN which is needed for declaring
buffers passed to BT stack and already includes <net/buf.h>.
Change-Id: I6b556be9fb3939a55af0b73d49fc59152d6d6a53
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce support buffer fragment chains that are linked together.
This is done with the help of a flag while the buffer is inside a FIFO
(indicating that the next fragment follows it in the same FIFO) and
with the help of a "next" pointer while the buffer is outside of a
FIFO.
In order to do proper "marshaling" a new net_buf_put() API needs to be
always used when inserting a buffer into a FIFO. Respectively, the
net_buf_get() and net_buf_get_timeout() functions are extended to
support getting buffers from arbitrary FIFOs and reassemble the
fragment chain based on the flags that the received buffers contain.
The insertion of a fragment chain using net_buf_put() into a FIFO is
done atomically with the help of irq_lock/unlock since FIFOs support
multiple writers, however since there's ever only a single reader per
FIFO similar locking is not necessary there.
Change-Id: I0ec579f63ea8d063f50e3f1f4c2e80ec399622d7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this API it's possible for the caller to force specific behavior
when it comes to waiting (or not waiting) on the FIFO.
Change-Id: Ib66e2f767c26c82abf1ba3b80bd15aec2383542e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is now safe to introduce the callback since nano_timer_init now
calls _nano_timeout_init which does takes care of initializing all
the fields properly.
Change-Id: I5735eeebef233a0a541ec8b2a354b65da98082fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a delayed version of nano_work API which is useful when
handling timeouts since the same stack/workqueue can be shared.
Change-Id: Iac43796fe96deb0a9c8976c91a65104b57779b00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register callback that will be called to
perform command completion.
Change-Id: Ide7a0427d9b8bb4dd8cfc0995ef2567b32e89632
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fixed doxygen comments for flash API usage. Clarified the use of
flash_write_protection_set API for write and erase operations.
Jira: ZEP-383
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change-Id: I6a323915c63a393b7be8f96fe3fcd9616a9b21d1
In scenarios where device PM is enabled and dynamic irqs are
used, move the irq to vector table to RAM and keep it updated,
so that we can use this to restore IOAPIC/LOAPIC vector entries.
Jira: ZEP-224
Change-Id: I0d4350d4e30f8ca337a2a1d4f012748c3cb450f4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
For EM Starter Kit, one of the SOC choices has DRAM and no FLASH.
If FLASH_SIZE is 0, the linker command file will create
SRAM, ICCM and DCCM memories (and no FLASH). SRAM is really DRAM.
Also, the linker.ld file is extended to handle microkernel
objects.
linker_harvard.ld has "all rights reserved". added to banner.
Change-Id: Ia433578b94ce91722f3670819f44befafeecf878
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
By default, kernel event logger is using the system timer. But on
some platforms where the timer driver maintains the system timer
cycle accumulator in software, such as ones using the LOAPIC timer,
the system timer behavior leads to timestamp errors. For example,
the timer interrupt is logged with a wrong timestamp since the HW
timer value has been reset (periodic mode) but accumulated value not
updated yet (done later in the ISR).
This patch is adding the possibility to register a timer callback
function that will be used by the kernel event logger. For example,
on Quark SE, this allows using RTC or AON counter which accuracy is
sufficient and behavior more straight forward compared to system
timer.
Change-Id: I754c7557350ef29fc10701e62a35a5425e035f11
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to struct _nano_timeout which is called in ISR
context allowing more flexible handling of timeouts.
Change-Id: If837b0b51b24dfffebac6f99f4d66fdf01c164f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IP packet passing through 6lowpan compression and 802.15.4
fragmentation has an issue. (RFC 6282 and 4944) RFC4944, 5.3
says "fragment header's datagram_size and datagram_offset
values as the size and offset of the IPv6 datagram before
compression".
At the moment datagram size and offset values are after
compression. Due to multiple bearer (15.4 and bluetooth) support
and multiple incoming buffers support functionality is divided
to compression and fragmentation parts. And datagram size and
offset values for BT are after compression. Small packet (which
doesn't need fragmentation) doesn't go through this. So cacheing
compressed and uncompressed header lengths and with hdr difference
preparing fragments as per original buffer (total buf size and offset).
Change-Id: I9d3b0433e64964c68519d7c007cc06ec6035b573
Jira: ZEP-208
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This adds a optional help string to the command table which is printed
when user enters > help <command>.
Change-Id: Id3a8995bb6c4ff6b009418e31968c0677e6e4921
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
I've tested that CONFIG_XIP does work with Harvard.
User's can build CONFIG_XIP=y, and then have their bootable image
be placed in SPI-FLASH. A bootloader will load up ICCM contents.
Zephyr will then copy remaining data from ICCM to DCCM.
This takes a bit of ICCM memory to do it, but it will work.
Change-Id: Ic1cd201d19aab9083d63334527d9d68f4edc6075
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Update all drivers that have vectorial data to return all 3 channels (X,
Y and Z) if the chan parameter is _ANY.
Also fix a compile bug in LSM9DS0 MFD driver.
Change-Id: I5bf261846bcd68c288b96997ff164726f75c151c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This accidentally snuck by between iterations of the workqueue patches.
In v1 there was a sensor-specific workqueue, which we then turned into a
global one.
Change-Id: I10b193bb535602a16f6742d057281ba01906228d
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
If application calls net_send(), set the retry count to some
low number (currently 5) so that we do not wait forever but
eventually we try to send the data properly.
Change-Id: I8103246ac9227a0cf70b56aecab6ed8307877e19
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are internal functions needed when initiating a TCP
connection.
Change-Id: Ide5d59ac9854ec8bdea3baa97b3cde3ffa6a5e0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function gets 32bit-wide data from net buffer and converts the
value from little endian to host order.
Change-Id: I2d2454951b3ac39686a25454678ce92d8a1a0f3d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The function gets 32bits wide data, converts host order to little
endian and then puts the data on protocol stack to be send.
Change-Id: I29e4040b302a16b551a0922133c327ff694fec5d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove the homegrown sensor delayed work API in favor of using the
system-wide workqueue. Drivers still have the option of using their own
fiber.
In a second step, drivers can be refactored to start and use their own
workqueue.
Change-Id: I70dea6fc2abcbc9e04ac1ed3c837483a3d3c4424
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The stub label is created with ISR and IRQ number since the same
ISR can be used by several IRQs
Change-Id: I0ea909fddbce7a70c754befd095b7a3b36fffab4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
The application can return BT_ATT_ERR_AUTHORIZATION on the callback
already so there is no reason to have it as a permission as once set
it always fails.
Change-Id: Ia634e3f313993dd36c06bff48f36d4ddf1264376
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Many drivers need to start fibers whose parameters are based on user
configuration. Make it easier to specify such parameters by creating a
fiber_config structure and a wrapper to use it.
Change-Id: I26917ada71acbc676c0f32b6ee081aff7bb1d6d8
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ARC CPUs have several other features controlled by aux registers.
Specifically, I will be needing ones for i-cache, d-cache and various
BUILD registers that indicate which features are present.
Change-Id: If15a330f4ea5aa519655f88526fbb5f600d7cc0b
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Nios II has no special instructions for testing bits, ffs, etc.
However, when poking memory-mapped peripherals, special *io variants
of ld and st instructions must be used to avoid issues with the
caches.
find_msb_set / find_lsb_set are implemented using universal GCC
compiler built-ins. It's not clear why this approach was not taken
on other arches.
The sys_in/sys_out/sys_io functions are completely removed as there
is no concept of these on Nios II.
sys_read/sys_write functions implemented using special GCC builtins
for the Nios II so that we don't have to use inline assembly.
Rest of the operations implemented in C, there is no requirement that
they be atomic.
Change-Id: Ic251fc7d7f342543dace4ccb3e429937b303215e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This file is taken verbatim from the Altera Nios II HAL
source and includes various useful processor defines
and macros.
Change-Id: Idbf0b49bebe33bb5a53f5155d927bafadda9a2fe
Origin: nios2.h Altera Nios II HAL
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
BSP builds for Nios II generate a linker.h and system.h which reflects
the configuration for that CPU. This can vary depending on how the CPU
is wired up in QSYS, so it needs to be at the SOC level--we essentially
treat any given CPU configuration as a SOC in Zephyr build terms.
Include these files from <arch/cpu.h>.
Change-Id: I12f76600107fec1a14a2f9cb82b0f55915ec03a6
Origin: Altera Quartus tools, machine generated
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Got lost in the .gitignore when these files had .cmd
extension.
Change-Id: I8a8d51014b621026b739525f3f9a3e8a20cb5ad0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ZEP-252 will handle implementation of the code here.
Change-Id: I3e9a6c7cdf2d5a3b0240317b772628fead528095
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At the moment this just jumps into prep_c, with comments left
on other things that need to be done. Having this here ensures that
the early boot code isn't discarded by gc-sections.
vector_table.c removed, it isn't the right approach for this CPU.
Proper method for initializing reset and exception vectors still
being investigated.
Change-Id: Id7965c671f1a55c42ecfb65119497405a646bec4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Avoids confusion with .gitignore rules, which were inadequate to
cover all the places where these files are found. At least in
VIM, these files are now syntax highlighted correctly.
Change-Id: I23810b0ed34129320cc2760e19ed1a610afe039e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Takes advantage of the fact that microkernel tasks can now wait on
nanokernel objects to simplify the device synchronization code.
Change-Id: I5b8d21eaccde9db8b63dd906ef982494a6170271
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the nanokernel infrastructure to permit microkernel tasks
to block/unblock on nanokernel objects. Multiple tasks may wait
on a nanokernel object's dedicated task wait queue.
It is important to note that when data is posted to the object
all the tasks on that object's dedicated task wait queue may be
woken up but the data is not immediately given to any of the tasks.
This is done to maintain consistent behavior with the nanokernel
as in a nanokernel system, fibers are given preference in both
waiting on and getting data from a nanokernel object.
Change-Id: Ia5c7f21ae59a367d9fec23dafc3a918d9e767db5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is just a temporary value for now, need to research the best
value to use.
Change-Id: Icaadf75fa3ae98b087f3d51813f85003f398f378
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Of the 3 related functions;
_thread_essential_set()
_thread_essential_clear()
_is_thread_essential()
The first two are parameter-less and always operate on
"_nanokernel.current". The last one takes a 'thread' parameter but will
operate on _nanokernel.current if the parameter is NULL. All calls to
_is_thread_essential() pass NULL!
This change makes the 3 functions consistent by removing the parameter
to the 3rd function. This should also be marginally more efficient,
though consistency was the motivation. This change corrects the doc
preamble to all 3 functions.
(These functions would probably be better as inlines. Also, the choice
of when to use wrappers seems a bit arbitrary. E.g. there's nothing
for setting/testing the "FIBER" flag.)
Change-Id: Ie3589f8a28b227c6d7a3a31b664d3b3e6e9c6d17
Signed-off-by: Geoff Thorpe <geoff.thorpe@nxp.com>
Refer to ATT as error domain expected by GATT API.
Change-Id: I70d45a618191ae859f3b2c33427dbb7262511393
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Indentation should be with tabs only (these lines were with tab +
spaces).
Change-Id: I8f199b1d6972b02513e4c293636606f481641266
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To boot zephyr on the Arduino 101 running the original bootloader
which supports DFU, set the following in your application configuration
file:
CONFIG_SS_RESET_VECTOR=0x40034000
CONFIG_PHYS_LOAD_ADDR=0x40010000
CONFIG_VERSION_HEADER=y
Jira: ZEP-219
Change-Id: Ia015a7b6fce888b49ed22c558de992132d4713ea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sys_slist_insert can be used to insert a node in the middle of the list
which previously was not possible with sys_slist_append and
sys_slist_prepend.
Change-Id: Ib9e319469cd4911adf7ddf49c54c3f7390c4c953
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This no longer defaults to X86 and instead throws an error if a
supported arch isn't found. Output format now checks CONFIG_ARM
instead of Cortex M3, should be the same for all ARM chips.
Change-Id: Ib9bf07ad93a44b3f7cdac7b52432110776eb23fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch removes DEV_* codes from device.h since they are not used
anymore. All APIs now use error codes from errno.h, following the
conventions from doc/collaboration/code/error_code_conventions.rst.
Change-Id: Ifc363ec8d3d5aa108eaef49d9283b67dcae69ce5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Documented the Power Management subsystem which includes the
power management hook interface, device power management,
device busy status interfac and other APIs. Also included
is a guide to writing Power Management applications.
This has 2 parts. One is the general description of the
infrastructure and the PMA writing guide which goes in the
'subsystem' area. Other is the API description that gets
automatically pulled in from the comments in the source files.
The API description goes into the section where all other
Zephyr APIs are put.
Change-Id: Id630209b23f931a8fcccb6f59428610298486743
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Now you can specify the sensor type you want to fetch using
sensor_sample_fetch_chan. This will inform the driver that you want only
one type of data updated, leaving the others unchanged and enabling
different sampling rates for multi function devices (MFDs).
Change-Id: I403e422dffadc697c19a5372ed55ed8f486a2607
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Swap order of mask and value parameters from i2c_reg_update_byte
function. This is needed make refactoring of sensor drivers that
would use this function easier, since all the register update
functions written for each driver have the mask before the value
in the parameter list.
Change-Id: I7bef7be73e904fca353a492ab9edd2a210df199e
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Enables API to register PSM server on BREDR transport.
Adds l2cap_br.c file responsible for BREDR specific functionality to
build path based on Kconfig selection.
Change-Id: I92823b0207ab0da96bfb813353de9f95fa5dd0f4
Origin: Original
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The device address must be given before the register address in the
parameter list of the i2c_reg_read_byte function.
Change-Id: I92afbbf83f76eeb58ec41a2a8c83dd909b78a23a
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
If one use the old gpio_set_callback() function,
the build will generate deprecation warnings.
Change-Id: I3f008ab3fc46e1b38cb433340d2f97671d04906e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Indenting away the function pointer name from the return type is not
consistent with the rest of the code base.
Change-Id: I8bd69ccfd201fa3c9eedb13caeff920774d1defd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Many sub-systems might require to set a callback on different pins.
Thus enabling it via changing the API.
It is also possible to retrieve private-data in the callback handler
using CONTAINER_OF() macro (include/misc/util.h).
Former API is still available, and is emulated through the new one.
Using both should not be a problem as it's using new API calls.
However, it's now better to start using the new API.
Change-Id: Id16594202905976cc524775d1cd3592b54a84514
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Certain Low power SOC states (e.g. deep sleep) will result in device
IP blocks losing state. In such a scenario it can be useful to have
a mechanism for devices (driver code) to signal the power manager /
policy that they are in the middle of a transaction.
We expect the device driver code to make a call to
device_busy_set(device *) before initiating a transaction and
device_busy_clear(device *) on completion. It is expected that device
driver developers will add this as necessary in their drivers.
Further an API is provided for power manager application / policy to
check this. Based on this the power manager / policy can decide
whether or not to go into a particular power state.
Change-Id: I0fedd90b98e182cd41b53c7f9e08655532822faa
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add API for reading, writing and updating internal registers of I2C
devices. This API is meant to be used as a simpler way of communicating
with I2C devices that have 8-bit internal registers.
Change-Id: I7280eb530039aa10ad9cc19c1c309c7a2f473eb4
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use SOC_SERIES_* for naming SoCs with similar features and architectures
with the goal of code reuse. The Series in the config variable should avoid
name collisions and clearly denote the relationships within an SoC family.
Change-Id: I7a98542f96b5d5dc3acc23782c4d45f98cceb599
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This way when BLUETOOTH_DEBUG has been disabled we don't need to make
extra #ifdefs in application code to make it build without debug
support.
Change-Id: Iceabe0d700d571afae8b85c2c559ba372a883682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add ip_buf_ref() helper that helps to track the calls to
net_buf refcounting in IP stack.
Change-Id: Ie5f5a5d57b6ffcb20df4fbc9f25c6c73a99589df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The GDB server implements a set of GDB commands, such as read/write
memory, read/write registers, connect/detach, breakpoints, single-step,
continue. It is not OS-aware, and thus provides a 'system-level'
debugging environment, where the system stops when debugging (such as
handling a breakpoint or single-stepping).
It currently only works over a serial line, taking over the
uart_console. If target code prints over the console, the GDB server
intecepts them and does not send the characters directly over the serial
line, but rather wraps them in a packet handled by the GDB client.
Change-Id: Ic4b82e81b5a575831c01af7b476767234fbf74f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce an x86 interrupt stack frame that contains more information
than the non-debug one, namely the caller-saved GPRs, as well as an API
to retrieve it. Able to handle nested interrupts stack frames.
Change-Id: If182aaa2f34e4714b16ca65ff79da63b72d962f7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
DEV_* error codes are being deprecated so hide them from
public documentation, to prevent mis-use.
Change-Id: Iee2f59502c9470c14ddf2fb1ed19b3526609e43b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about "Unsupported xml/html tag <user> found".
Make the correct indentation to signify a code block, since it is
indeed a code block. This gets rid of the warning.
Change-Id: I78ea7709f1d45b2ff48c86153151d4f71a41d1e3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about @defgroup not closing. Fix it by moving
code around, as doxygen was confused by all the #ifdef-#endif.
Change-Id: Iacc2e983cc82b0dfcaaea423ff64bdcc4db8577f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: I1944b164ebe420fbdc03fc65b314ac53493a5d2c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: Iabe3550568cdfdda6ad71be6fab3e8b5dfbeb940
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use \p to refer to parameters instead of using "@" which
doxygen complains.
Change-Id: I0e8384084497f422ea635caf656ae4a8b06fde94
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The param "pwm" is not in the argument list of pwm_all_set_phase().
So remove it.
Change-Id: I960b5b42de33edc4a6216fb5a65e0f1352bd637d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the DEVICE_AND_API_INIT() macro to take in a parameter
to assign to device->driver_api. This eliminates the need to
assign to driver_api during runtime device initialization.
This provides an alternative way to declare devices. This should
save a few bytes in ROM for those devices that will never fail
initialization (in other words, never need to manipulate
driver_api pointer at all).
Also clean up the documentation a bit to remove duplicated
block of information.
Change-Id: I6abed1abe75db2e8babfcf1ecf590491132a5543
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the missing @ingroup for counter API so it appears
under device driver category.
Change-Id: I763faab802d3a6453ab46ee969b5ffd082282f1d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If incoming pairing request would result in JustWorks pairing this
can be used to request consent from user for accepting it.
Change-Id: If0695d0e1bb010bade6a16abe1b57a2ce07856cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The device_get_binding() no longer returns pointers
to device struct when driver_api is NULL. Therefore,
there is no need to check for driver_api being NULL
in the serial driver wrapper functions.
Change-Id: I018a409324d7c1ae83c699a3ebf30f2f2abfb3b3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a problem where the nanokernel FIFO state information could get
out of sync due to a timeout.
The nanokernel FIFO structure nano_fifo now maintains two separate
queues: one for waiting fibers and the other for posted data. This
permits the safe and independent querying of the queues as needed
when getting and/or putting data from/on the nanokernel FIFO.
Change-Id: Ifbcb5004558b06fc55cad2a955f5be20e716b392
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Now that the incoming ACL & HCI event pools can be defined externally
to hci_core.c there should be convenience macros to know what's the
minimum required buffer size for these pools.
Change-Id: I6f2a7322a3d77e1304e9d925767a1fd3471c76c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a complete new cc2520 driver for zephyr. Intention is to fit
better within Zephyr device driver model.
- It's (almost*) ready to be instanciated as many times as necessary
- It's fully interrupt based on SFD and FIFOP (no pin polling)
- It's nicer to other sub-systems (it sleeps, no busy-wait loop)
- It still loosely complies to old legacy radio device driver model
*: GPIO API needs to be fixed in order to accept multiple callbacks, as
well as enabling callbacks to retrieve private data.
Notes:
- Hardware filtering does not work yet as the net stack, above, needs to
provide the relevant information for it (src/dst ieee802154 extended
addresses, short addresses...)
- A embryo of generic functions (txpower, channel, addresses...)
have been implemented but don't belong yet to any radio device driver
model. Such new driver model will come afterwards (soon?)
- SPI API would need to be improved to avoid as much as possible memcpy
as well as spi_slave_select() call.
Change-Id: I1fd6dfff28fba3984f6006d394ea12f1e763ac18
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ieee802154 is a more relevant name. Applying the change in
include/drivers as well.
Change-Id: I7f7188ed0421045d7667303c375eeb8af1298b97
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for SECONDS() and MSEC, now sys_clock.h provides a USEC() macro.
Change-Id: I43e8b132d2deeb862d8cfda1f785115f339d6ddb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Keep a single bt_storage_* name space for current and future storage
APIs.
Change-Id: If158eb7408cce7c06cd8f98d78a061b9f9585265
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for the persistent storage API.
Change-Id: I7a6cc283aa88e7d861af18a6f0db2ed8c71e44a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since sensors' API uses SI units, all attributes and channel reading use
SI units. Hence, conversions from other units to SI are necessary.
This patch adds helper for converting:
* m/s^2 to Gs (and vice versa);
* degrees to radians (and vice versa);
Change-Id: I49f8763bed253ff6bde4c97618766b05f97da699
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This patch as following attributes:
* SENSOR_ATTR_OFFSET: for setting offsets in order to adjust the read
values;
* SENSOR_ATTR_CALIB_TARGET: for setting target that the chip internal
algorithms need to converge to when calibrating;
Change-Id: I3aae5aa06bcd1376423e58b0511267ea43038718
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The shorter form "param" is used elsewhere and this helps avoid overly
long lines.
Change-Id: Ie76497b5bf30e72099d13a26db9cacb8cd2c9c79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The commands array is not expected to change and can be declared
const. This allows callers to cleanly declare their commands lists as
const, effectively moving the structures from SRAM to code section.
Change-Id: Ie1710622b8cfa609e129eb79712f910f1d1aace3
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
As for double linked list provided through misc/dlist.h, this provides a
generic API for single linked list in misc/slist.h. It follows the same
naming rule as in dlist.h
Change-Id: I955bd16a201bc9987c29f5a9e3e3d8447682a71e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It wasn't correct to add the size of the long jump instruction
as it *replaces* a short jump instead of just being after it.
So redefine this to be the difference in size between these
two instructions.
Change-Id: I65be2afab19d9cd8b096551acde0156f0503df87
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ARC CPU has stack checking feature that allows to trigger an exception
whenever the stack is incorrectly accessed.
This patch implements the stack_top and stack_base register updates on
context switches, and activates the Stack Checking bit of STATUS32
register when the CPU is in the context of a fiber or task.
As GCC accesses the non-yet allocated stack with frame pointer enabled,
this patch also add the omit-frame-pointer gcc flag in order to work
properly.
Change-Id: Ia9e224085a03bd29d682fb8f51f8e712f2ccb556
Signed-off-by: Alexandre d'Alton <alexandre.dalton@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
API definition sys_k_event_logger_get_wait_timeout on public header
kernel_event_logger.h was passing the reference to logger struct on third
position instead of first, on sys_event_logger_get_wait_timeout call.
Resulting on error when API definition is followed.
Jira: ZEP-86
Change-Id: Ia54cd5ffe28a1fab7873bb49bd7452313ab92a02
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: Ie1d391945cd1cfb9a5dc199783c2d224eb1b0ef3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This allows to start (general or limited) BR/EDR discovery. Inquiry
is active until explicitly disabled by application. This is to keep
BR/EDR discovery API similar to LE scan API.
< HCI Command: Inquiry (0x01|0x0001) plen 5
Access code: 0x9e8b33 (General Inquiry)
Length: 61.44s (0x30)
Num responses: 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) ncmd 1
Status: Success (0x00)
> HCI Event: Inquiry Complete (0x01) plen 1
Status: Success (0x00)
Change-Id: I946fbd881e6d0460be28a9975acd564ae32896e8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If the sys log prints already have newline character, then the
syslog macros add another one. User can prevent this by defining
SYS_LOG_NO_NEWLINE before including the sys_log.h
Change-Id: I8aecd856dca8009035dd44f300846492763e57b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Such helper is useful to generate a complete bit mask from a given
number. For instance BIT_MASK(2) will output 0x03, or BIT_MASK(8) will
output 0xFF
Change-Id: I406de767d839b7b2d37024b7b41679edddabe551
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch adds a comment to DEV_* codes definition to inform that these
codes are deprecated and we should use codes from errno.h instead.
Change-Id: Ia01b83035db5526b2da56ad4a06b2ebab85b0d55
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add enum value for full-scale attribute, so we can implement runtime
alteration if needed.
Change-Id: Ib71b4cac6e8841e3f082c07ee75939d1c51209b4
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
The header sys_log.h concentrates logging macro definitions so it can be
reused by all code, change aims create an API to replace replace
currently duplicated logging macro definitions. Later enhancements to
log can now be performed in a single file. Features:
* Optional printing of colored messages
* Incremental log levels per-module
* Optional printing of logging level label (info, error, warning, debug)
* Caller function name printing
* One point log disable
* Global override log level
* Print function detection (printf or printk)
JIRA item ZEP-111 refers to this change.
Origin: Original
Change-Id: I34492b0148b4e9d0094f69c511b96f4fd640ef44
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The helper for analyzing (fiber) stack usage is in no way specific to
Bluetooth and will likely be of use to many other places as well. Move
it therefore to include/misc.
Change-Id: Iedb699dbe248aca305e387998d37bb339cfb0e21
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The slope threshold and duration attributes can be used to
configure the any-motion (slope) interrupt for sensors that
support it.
Change-Id: Ib09ef276cfd3dda5c94bce13bcf4c6c5436c1e4c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add the public API for counter devices and the drivers infrastructure.
Origin: Original
Change-Id: If100fbc9b3d119ce2be6c131bd64dbeb4fe346f2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add enum values that are common for magnetometer sensors (vectorial
components).
Also add oversampling factor attribute.
Change-Id: Ic193c1ad14af301047e652ac63b4480c1b1154bc
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This patch fixes the remaining APIs documentation which have reference
to DEV_* codes.
Change-Id: I26dd971a4b5e492ce026892f6262b84f7bde6296
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch redefines DEV_* error codes in terms of errno.h codes.
Change-Id: Iab994c40265c294296491d427f65c38abd48b795
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
All driver APIs (i2c, spi, gpio, etc.) return 'int' type, but pinmux
APIs. So this patch changes the returning type from 'uint32_t' to
'int' from include/pinmux.h and fixes all pinmux drivers according.
Besides keeping consistency between all drivers APIs, this patch is
also applicable for the errno.h code transition. Pinmux drivers will
return negative errno.h codes so returning 'int' is more suitable
than 'uint32_t'.
Change-Id: I2a6e92d567a0e21fec363226da6197df94657d4b
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The patch adds a driver for STM32F10x series RCC (Reset and Clock
Control) subsystem.
The module is primarily responsible for setting up of MCU's clock
tree. In particular the driver sets up SYSCLK, PLL (with source
configuration), AHB prescaler, and APB1/APB2 prescalers. As part of this
functionality, the subsystem can enable/disable clock signal for
particular peripherals, thus reducing the power consumption of the MCU.
The driver implements clock control driver API. However, subsystem IDs
being HW specific are exposed in driver public header that must be
included by callers. The driver registers a single device using a common
name STM32_CLOCK_CONTROL_NAME. The device is initialized at
the PRIMARY level with priority 1. This allows the initialization to
take place right after SoC initialization routine.
The driver depends on selection of SOC_STM32F1X config option and is MCU
specific.
Change-Id: I8bea5db20726a24bce7b7ffe0b95de543240429a
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Extend the public API of clock_control driver with a function for
querying of clock rate driving given peripheral. This is useful when the
driver must calculate or configurae values that depend on the rate of
clock driving this subsystem.
A baud rate setting of UART port is an example of such operation. To
configure a particular baud rate the driver may need to set the internal
counters of UART port, where the actual value will depend on the clock
rate for this peripheral.
The implementation returns DEV_NO_SUPPORT for clock_control drivers that
do not implement such functionality.
Change-Id: I4e7ec96cd3678a4bb1ff289b0247488289310f2d
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
When using the CSMA MAC driver, a new packet can be queued before
all the fragments of the previous one were sent. The transmit_packet_list()
function will start sending the old fragments with the new net_buf context.
Keep a per-context neighbor_list to avoid that
Change-Id: I9d41a923c48f597cc95a8f8c9f67884c5caac02c
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Sensor drivers expose one or more channels, corresponding to each
individual quantity they can measure. Such quantities may be different
altogether (e.g. temperature and pressure) or different axes for the
same unit (e.g. three axes of acceleration). Before reading channels, a
driver must be explicitly instructed to obtain a sample from the device.
This helps accommodate sensors which can only read all channels at once,
and also helps ensure coherence of measurements and optimize I2C/SPI
traffic.
Channels can be read as floating point values or struct sensor_value.
The latter consists of a pair of integers and a type field which
dictates how to interpret said integers. The most common type is INT
(where the second value is ignored) or INT_PLUS_MICRO, which means the
second value should be multiplied by 1.0e-6 and added to the first.
A sensor driver may support one or more triggers, corresponding to
interrupts or timers. Registering for a trigger involves supplying the
driver with a callback which is called when a condition is reached.
Examples of trigger types are: data ready, timer expiration, any-motion,
near/far.
Finally, sensors support attributes such as sample frequency,
measurement accuracy or threshold values for triggers. However, runtime
configuration is discouraged, in the interest of keeping code simple.
Origin: Original
Change-Id: Id290fe544b6f7eccc4b109f3912fca1692e55623
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When user creates a socket using net_context_get(), the function
requires local endpoint IP address. This should not be a NULL
pointer because the storage for that IP address was statically
allocated inside the function. Because of this the user needs
to allocate the storage for this and pass that local IP address
to the function. The net_context_get() will fill that local
address to sane value if user passes ANY address (== all bytes
are zeroes) to it.
Change-Id: I88314957f07912d9ecbe517a2402822401d81bd9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nmi_on_reset.S functions are used by all ARM platforms. It
makes no sense to repeat the same code for all platforms. Moving
the code from each SOC implementation to arch/arm/core.
The same treatment for the NMI_INIT() macro. Moving it from a per
SOC implementation to the include/arch/arm/cortex_m/nmi.h.
Change-Id: I574d8880a44046cc7b9e1b635e80d6e83657b8c1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Now that the internal libc has the off_t type it's the natural choice
for the offset parameters in the flash API.
Change-Id: I69999999625b46634f6d3008fe1b3f82c17d357c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the ordering consistent e.g. with SPI, Bluetooth and
Networking APIs. This also follows the order of parameters in the
POSIX read/write APIs.
Change-Id: I4f11c8c90ccadf176d79f6a7bbd98aac61c26cf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
size_t is the natural type for any integer that describes a number of
bytes. For the actual data use void pointers to avoid callers having
to do explicit typecasts if the data doesn't originate in a uint8_t
array. Also use a const pointer for writing to avoid typecasts for
data that originates in a const location.
Change-Id: Idbfc14b2d61ca6189411b211c3727f857dbd4059
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Specifying HEAP_SIZE keyword in an app's MDEF file, results in
creating a new memory pool, which can be accessed using the
task_malloc() and task_free() APIs, which have the usual malloc/free
like semantics.
Expected format in MDEF file
HEAP_SIZE <value>
Change-Id: I0569cffeecf8a2c23c20c7b359256123ece91982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Support for Freescale/NXP K64 SPI modules, limited to:
- Master mode
- A single active set of clock and transfer attributes (CTAR0), which
includes non-adjustable delay parameters
- Tx FIFO fill and Rx FIFO drain interrupt handling
- Standard, continuous select and continuous SCK SPI transfer formats
Also, divide-by-zero code generation in this driver is prevented.
The 'volatile' attribute is added to some of the variables in the baud
rate and delay calculation functions of the K64 SPI driver in order to
prevent bad code generation by gcc toolchains for ARM seen when an
optimization setting above -O0 is used.
Specifically, a register is loaded with the constant 0 and is used as
the divisor in a following divide instruction, resulting in a
divide-by-zero exception.
This issue has been seen with gcc versions 4.8.1 (the VxWorks toolchain)
and 5.2.0 (the Zephyr SDK toolchain).
Change-Id: Ib5b2b748aad8fdfd5e8d40544e6e1abef3713abe
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Phase describes number of clock ticks of delay before the start of the
pulse.
Change-Id: I8e2f5fde423edff09cd5a4a298d911cb7d3cc126
Work-by: Mike Hirst <michael.hirst@windriver.com>
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Reorganizes mostly by using preprocessor (indirectly Kconfig options)
strictly LE-SMP related interfaces and security interfaces shared
between LE and BREDR connections.
Change-Id: I90daa36d72403cd5b73e6791714fcaf7f1fbe8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The pinmux API was modified to expand the meaning of the 'func' argument
to allow it to represent more than a pre-configured function. This was done
to reasonably accommodate a larger range of pin configuration options
offered by other MCUs, such as the Freescale K64 (up to 8 pin functions,
plus interrupt, pullup/down, drive strength, open-drain, slew rate, etc.).
This allows bit fields to be used to define various settings.
Change-Id: I2b216b822c6bae7133eed01c8c3339bb47b6c5db
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
ipm_send_t properly had 'const void *' for the data payload, but
not the ipm_send() API.
Change-Id: I62a424d37bc17f5bc3646c71d3ff3b029f52cbcc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This function doesn't return number of bytes sent but error code.
Change-Id: Ife5e4d3957226ce2b4283b5d229095db2ac375dc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This documents more in detail the behavior of the API, what callbacks are
involved and when they are called, etc.
Change-Id: I62994ed09a9e8b3f14dc3f8c792469a93aeefabc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There's no reason to require callers to cast their data to uint8_t *
when the data might e.g. originate in a packed struct or some other
data type. Instead, be nice to callers and let them use any pointer
they want. Additionally, declare the TX buffer as a const pointer so
unnecessary typecasts aren't needed for that either (if the data
originates in a const location).
Change-Id: I1482ca4e350b5a7fbda6871ed9f54f255af3aa9e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These were not actually used anywhere and weren't correct (at least
not the READ variant which assumed the architecture can always deal
with unaligned access).
Change-Id: If2bee24dc729683c839bb631d411eab73498adad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provide a helper to perform safe unaligned writes to data.
Change-Id: I00edde580d2ef93daaf7825d333d38fc10f854ac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use of these is the mark of a deranged imagination.
Change-Id: Ib4b5f78cf61c016e333288090b397e9a3e0b8a40
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are guaranteed to work for bitfields that are
larger then 32 bits wide.
Change-Id: I39a641f08a255478fae583947bced762950d12ff
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The app-facing interface for configuring interrupts was never
formally defined, instead it was defined separately for each arch
in their respective arch-specific header files. Occasionally these
would go out of sync.
Now there is a single irq.h header which defines this interface.
To avoid runtime overhead, these map to _arch_* implementations of
each that must be defined in headers pulled in by arch/cpu.h.
Change-Id: I69afbeff31fd07f981b5b291f3c427296b00a4ef
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Like for the other context-specific APIs, also provide a
context-agnostic wrapper.
Change-Id: Icf0a62f4c06aec42f0febc298edbd8bdeec63749
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds the following routines for waking a fiber that was previously
put to sleep using fiber_sleep().
isr_fiber_wakeup()
fiber_fiber_wakeup()
task_fiber_wakeup()
Change-Id: I7d78ee6997163d71b92f388a7b4c484f2e97862b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The fiber_start() family of routines now return a nanokernel
thread id (nano_thread_id_t). This is a pre-requisite step for
allowing fiber_sleep() operations to be cancelled.
Change-Id: I74a3885eda3252c158f4a48e90244569633469c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the user unsets CONFIG_NETWORKING_WITH_LOGGING, it will mean he
really doesn't want to get any network stack logging output.
Change-Id: I0629a045adbf8916327a8a9ba69b6e6e9ee2e7d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
() Add brief descriptions for #defines.
() Hides internal only API typedefs and struct.
Change-Id: I452c5d7fe56d57ba05338639986e2fff44a89244
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Add brief descriptions for #defines.
() Remove the callback enums as they are not being used.
() Hides internal only API typedefs and struct.
Change-Id: I62bc38890a7b49b3ec613064f7574e2f5b75b70c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Document callbacks included in structs since they are also public API.
Change-Id: I8eda02b12172c54e8076208d8ea5ae246c650a3c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the parameters and expected return values of the read, write
and flush attribute callbacks.
Change-Id: I600da2ed64944986395520d7fae77fcb05b58e86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are specified in the Core Specification Supplement.
Change-Id: Ieaa9f061666119bb430d77b0fd40b4891e515b81
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now this only exposes the various ATT error codes.
Change-Id: If568782e90dca22871681d2d3b2d81ae4cb8e5e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds CSC Service related UUID definitions.
Change-Id: I3fc77cd6561ccfd7de0d906c7ddcd5d8dac5bff9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Make device APIs a group to enable in raw doxygen output and group
all IO drivers into one category.
Change-Id: I1f9338d3b977bd08a6a1b8d8b396ce1fba33aada
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds Environmental Sensing Service related UUID definitions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: Idd87139971fb3c992b7fb7e346ce2ea90553ad38
Edit public API details for clarity, grammar, punctuation found
on file uart.h
Amost all elements in this driver are now documented.
Made consistent use of @retval to document return values.
Made all verbs in the brief descriptions imperative.
Change-Id: Ied3a80ea636855ba42b33877c0ac7ac66d42e458
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
A helper for the (fairly common) task of decoding individual 8-bit
values.
Change-Id: Id7e97df152232d5dd9861cf1e107877f1b8febaa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Edit public API details for clarity, grammar, punctuation found
on file event_logger.h
Includes the event logger information in the ReST documentation.
Modifies doxygen.config to include the event logger.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I88b8672a527138e2b4f7df4b4b0495a0d871cad3
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
This is a prologue to reverting:
commit 3c66686
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Tue Feb 9 17:34:02 2016 -0500
sys_clock: start the microkernel ticker in the MICROKERNEL init level
to allow the devices initializing in pre-MICROKERNEL init levels to poll
the hi-res clock (sys_cycle_get_32()), which relies on the system clock
having been started.
This change allows starting the system clock in the NANOKERNEL init
level by delaying announcing the ticks until the MICROKERNEL init level.
Change-Id: I43d54bb5e2f182d4edd880da0124a0817f911943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Review and edit public API details for clarity, consistency,
and punctuation.
Made consistent use of @retval to document return values.
Used imperative verbs for all @brief descriptions.
Change-Id: I7f1ec25ceddacedcc7a9c63e7efd0621e80ad0de
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
