There is no reason to keep active stream socket when there was some data
loss. Mark such socket for closing and close it when all (so far)
received packets have been processed.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample was producing quite a few `<log_strdup alloc failed>`
warnings when running in default configuration on qemu_x86. Increase the
log_strdup buffer count to prevent that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add bootstrap section to the documentation, explaining how to configure
the Leshan Demo Bootstrap Server locally and run the sample.
Update the download link for the Leshan Demo Server, according to the
upstream Leshan documentation.
Fix bullet list with Leshan security parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlay-bootstrap.conf which allows to easily configure the sample
to use the bootstrap server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be optional to handle separate response, as it's a
mandatory requirement according to the RFC7252:
"The protocol leaves the decision whether to
piggyback a response or not (i.e., send a separate response) to
the server. The client MUST be prepared to receive either."
Therefore, remove the flag as separate responses are handled now
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate response handling implemented in the engine was faulty. The
separate response was not acknowledged by the client, resulting in
spurious retransmissions from the server side.
Also, the pending CON message was retransmitted by the client even after
it was acknowledged by an empty ACK, but the respnse haven't arrived
yet. Fix this by adding a new `acknowledged` flag to the `lwm2m_message`
structure. Once acknowledged, the flag is set and the confirmable
message is no longer retransmitted. We keep the message on the pending
list in order to timeout properly in case separate response does not
arrive in time.
Finally, prevent the reply callback from being called twice in case
the response is transmitted separately from ACk. The callback should
only be called on the actual reply, not the empty ACK.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far this function existed as a static function in LwM2M PULL FOTA
module. Since such functionality will be needed in other places, make it
an internal API function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Changing .known-issues/doc should always trigger a documentation build
so add it to the filters.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Sphinx==3.3.0 slightly changed the warning messages, which causes fails
on filter-known-issues. Update to the new messages.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The decision to set aszmic = 1 in the net_tx structure was made after
the variable was passed to the crypto context, creating a discrepancy
between the two when aszmic is 1.
Extracts transport encryption to a separate function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Following migration of pinctrl configuration from pinmux.c files
to device tree and deprecation of pinctrl defines, remove
pinmux.c files when possible.
Additionally remove the CMakeLists.txt files when it makes sense.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for SDMMC pins configuration, deprecate SDMMC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for I2S pins configuration, deprecate I2S related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for USB pins configuration, deprecate USB related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for ETH pins configuration, deprecate ETH related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for ADC pins configuration, deprecate ADC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for SPI pins configuration, deprecate SPI related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for I2C pins configuration, deprecate I2C related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for CAN pins configuration, deprecate DAC related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for serial pins configuration, deprecate CAN related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for serial pins configuration, deprecate (LP)U(S)ART related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of all in-tree boards to device tree bindings
for pwm pins configuration, deprecate PWN related macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The commit changes run-time checks of file system driver's callbacks
pointers, against null, optional by replacing `if` with `CHECKIF` macro,
which means that they can be removed from compilation with Kconfig
option CONFIG_NO_RUNTIME_CHECKS.
Additionally the commit allows the same checks to fail hard, with
assertion, when CONFIG_ASSERT_ON_ERRORS option is selected.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add some comments about rbtree to make it more readable
Add more detail infos to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Reworks the mcux ethernet driver to use DT_INST_FOREACH_STATUS_OKAY and
eliminate a lot of duplicate code between instance 0 and instance 1.
Renames the ERR_MISC interrupt to ERR due to an issue with the
underscore in the device tree preprocessor macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The es-WIFI driver is used by Inventek's es-WIFI shields. This enables
wifi sample to build all variations to ensures that dependencies are
meet.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add Inventek es-WIFI modules shield. This shield exposes es-WIFI driver
using Arduino Uno R3 header by UART or SPI interfaces. It shows how
user can create their own overlay and expose es-WIFI driver.
The current Inventek's EVB doesn't have all pins necessary to control
the module by Arduino hearder. This shows how to wire to get ISM43xx
EVB working.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add uart bus interface to extended esWIFI driver. This enables all
Inventek modules with IWIN AT Commands firmware.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
The WIFI_ESWIFI_NAME config would be uselful when there is no device
tree alternative. The esWIFI driver already is on device tree and the
label property exists. This remove WIFI_ESWIFI_NAME Kconfig variable
and switch to device tree equivalent.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Remove global access to structure eswifi_spi_data variable. Instead,
add a method to pass access to that structure. This allows better
control to the data bus variable.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Do minor change of the descriptions and doxygen group name in order to
pave the way for generation the test specification.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The PA sync callbacks would have been registered for each new
PA sync, which would cause the callbacks to be called multiple times
if multiple PA syncs were created.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is a temporary workaround for an issue in TI's RF Driver
API. A subsequent release of the SimpleLink SDK will mitigate
the need for it and it can be reverted when hal/ti receives
that update.
Fixes#29418
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change reworks the cc13xx_cc26xx IEEE 802.15.4 driver to use
the TI RF driver API that is available in modules/hal/ti.
There are a number of benefits to using TI's API including
- a stable multi-OS vendor library and API
- API compatibility with the rest of the SimpleLink SDK and SoC family
- potential multi-protocol & multi-client radio operation
(e.g. both 15.4 and BLE)
- coexistence support with other chipsets via gpio
- vetted TI RF driver resources, such as
- the radio command queue
- highly tuned / coupled RTC & RAT (RAdio Timer) API
Fixes#26312
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Update documention to refer to MEC152x specifications and
SPI image generator. MEC152x is the actual production SOC.
The only difference is the Boot-ROM loader SPI image layout.
Preserve the link to the old, MEC1501 SPI image generator.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This is taking too long for every run and does not seem to work as
expected and wastes time instead of saving it. Remove for now..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not need libgcc always, some environments do not have libgcc and
do not require it, so keep it more flexible.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Without the -Wno-typedef-redefinition option, clang complains if a
typedef gets redefined in gnu99 mode (since this is officially a C11
feature).
While new versions of GCC do not seem to issue this warning in gnu99
mode anymore. So some existing code with typedef redefined which works
well with GCC will issue this warning.
Similar to what was done in 2354f055ec.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add generated documentation content for known devicetree bindings
using the Binding abstraction which was just added to edtlib. This
works similarly to the way Kconfig content is generated, so extract a
bit of common helper code for doing that out and rename the relevant
files to keep the distinction clear.
Make the documentation build system respect a preset DTS_ROOT. In this
way, out of tree bindings can be added to the generated content by
telling the documentation build system where to find them, identically
to how out of tree bindings can be added to a Zephyr application.
Similarly, make the output directory configurable.
Fixes: #28865
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
