The k_poll implementation places a struct _poller on the stack and
shares it with other threads, which is incompatible with the
KERNEL_COHERENCE model of cached stacks.
Make this a hard build failure instead of a kconfig dependency for
clarity. The failures if a user actually enables both are subtle and
difficult to debug.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Detection of transition from delayed to pending can fail in some cases
if the timeouts are not precisely managed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The current implementation of delayed work will cancel and re-submit a
pending work item that is no-wait, putting it at the back of the
queue. Verify this behavior.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The current implementation of delayed work retains a pointer to the
queue unless the work item is successfully cancelled, preventing a
completed item from being resubmitted to a different queue. Confirm
this behavior and its workaround.
Also validates some unsuccessful cancel return values.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Pass a pointer to the work item member rather than casting the
augmented work item pointer to a base work item pointer.
Also the return type of k_work_pending() is bool, so use that rather
than comparing it to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test_triggered_wait_expired test submits the items with
2*SUBMIT_WAIT timeout and waits for the timeout to expire
so the items are being worked on. It waits one SUBMIT_WAIT
and checks none of the items have started. Then waits
another SUBMIT_WAIT to check if they have all finished.
However, since the timeout is at 2*SUBMIT_WAIT, the work
queue may have just started going through the list of items.
This means some items may have started while others have not.
This results in the test failing as not all items have
finished. So lengthen the second sleep to allow items to
finish before checking.
Fixes#28589
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add k_delayed_work_pending similar to k_work_pending to check if the
delayed work item has been submitted but not yet completed.
This would compliment the API since using k_work_pending or
k_delayed_work_remaining_get is not enough to check this condition.
This is because the timeout could have run out, but the timeout handler
not yet processed and put the work into the workqueue.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
During inspection of the workqueue tests, I find out testing gaps.
Decided to add new test cases that can improve Zephyr OS testing
quality.
Added new test cases:
1. test_work_item_supplied_with_func
In docs described that work item supplied with a handler function,
prove that it works.
2. test_process_work_items_fifo
Test that system process work items in first-in, first-out manner.
3. test_sched_delayed_work_item
Verify that delayed work item processed after specific period of time
stated by user.
4. test_workqueue_max_number
Test the limit of number of workqueues created
5. test_cancel_processed_work_item Created test to increase branch
coverage.
Modified existing test cases:
1. test_work_submit_handler updated Doxygen tag, added more detailed
description"
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The k_queue data structure, when CONFIG_POLL was enabled, would
inexplicably use k_poll() as its blocking mechanism instead of the
original wait_q/pend() code. This was actually racy, see commit
b173e4353f. The code was structured as a condition variable: using
a spinlock around the queue data before deciding to block. But unlike
pend_current_thread(), k_poll() cannot atomically release a lock.
A workaround had been in place for this, and then accidentally
reverted (both by me!) because the code looked "wrong".
This is just fragile, there's no reason to have two implementations of
k_queue_get(). Remove.
Note that this also removes a test case in the work_queue test where
(when CONFIG_POLL was enabled, but not otherwise) it was checking for
the ability to immediately cancel a delayed work item that was
submitted with a timeout of K_NO_WAIT (i.e. "queue it immediately").
This DOES NOT work with the origina/non-poll queue backend, and has
never been a documented behavior of k_delayed_work_submit_to_queue()
under any circumstances. I don't know why we were testing this.
Fixes#25904
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
In Qemu icount mode, busy wait will cause lots of wall time and it's
very easy to get sanitycheck timeout(this case will be successful if
given enough timeout value for sanitycheck), so reduce test interval
to save execution time.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Pun all workqueue tests under 1 doxygen group.
This removes kernel_workqueue_triggered_tests and
kernel_workqueue_delayed_tests doxygen groups.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This makes the tests actually assert if k_delayed_work_submit fails to
resubmit to ensure that not only the work is executed but also no errors
are reported in such case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is aligned with the documentation which states that an error shall
be returned if the work has been completed:
'-EINVAL Work item is being processed or has completed its work.'
Though in order to be able to resubmit from the handler itself it needs
to be able to distinct when the work is already completed so instead of
-EINVAL it return -EALREADY when the work is considered to be completed.
Fixes#22803
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After run Sanitycheck script I found out that some test cases
have the same test case name in the test result .xml file.
To get rid of it, I decided to change test cases names
for the kernel tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Existing test checking value returned by k_delayed_work_remaining_get()
verified two cases:
1) The k_delayed_work_remaining_get() should return 0 for non-submitted
work.
2) The k_delayed_work_remaining_get() should return value greater or
equal to the timeout value of just submitted work.
Unfortunately, the second check is not correct. The value returned
by the k_delayed_work_remaining_get() just after submitting delayed
work should be:
- Equal to timeout of the submitted work if no timer interrupt was
executed between submitting work and checking remaining time.
OR
- Less than timeout of the submitted work if a timer interrupt was
executed between submitting work and checking remaining time.
This commit changes the test accordingly taking under account the
error caused by back and forth conversion between ms and ticks.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This test was written to properly align its millisecond-measured wait
time and assumed that there would be no other overhead. In fact on
fast tick rate systems (or even ones where the alignment computation
doesn't provide the needed padding as "slop") that's not quite enough
time to complete the full test. There are cycles between the sleep
calls that need to be accounted for, and aren't.
Just give it one extra work item of time before failing. We aren't
testing work queue timing precision here, just evaluation semantics.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
for SDK 0.10.0, it consumes more stack size when coverage enabled
on qemu_x86 and mps2_an385 platform, adjust stack size for most of
the test cases, otherwise there will be stack overflow.
Fixes: #14500.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
