This commit reverts the device tree binding vendor prefix check regular
expression change that was introduced by the following commit:
5b10fac97e
The changed regular expression fails to detect the correctly specified
vendor prefixes in the `vendor-prefixes.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
While testing sanitycheck classes, found some wrongly initialisized
variables which caused issues, fixed those..
All Test* classes should now be ignored by pytest and should not be
treated as pytest code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr uses some defines to provide additional information about the
item being declared. When unrecognized these can confuse the
Coccinelle parser so that it does not apply semantic patches in
situations where they should be applied.
Add a macro file that extends the Coccinelle builtin macro file with
some identifiers that are specific to Zephyr.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When files were added, matching did not work and we were counting added
files twice. Use sets to make sure we have a unique list of files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Linux uses for_each in macros that produce loops; Zephyr uses
FOR_EACH. Update the corresponding checks to match Zephyr's spelling.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This takes the linux diffs between
a8c964eacb21288b2dbfa9d80cee5968a3b8fb21 and
16fbf79b0f83bc752cee8589279f1ebfe57b3b6e and applies them to the
Zephyr copy. Three changes did not apply cleanly:
* linux added a comment to the line that enables C99 comments;
Zephyr disallows them.
* linux uses vendor-prefixes.yaml; zephyr uses the older .txt file
* manual addition of colon in a check before BRACKET_SPACE error
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some API that takes timeouts represented by integral milliseconds
recommended using the K_NO_WAIT and K_FOREVER constants, which are no
longer integers. This script replaces the incorrect arguments with
the corresponding legacy integral value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
OSX compatibility added bossac runner.
Linux behvaiour is unchanged.
Window is now explicity mentioned as incompatible
Signed-off-by: Brendon Le Comte <brendon.lecomte@gmail.com>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the compat2enabled and label2node maps in the global edt object to
speed up some functions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's a common operation to want to find a node based on its label. Add
a lookup table to make this easier.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In some cases terminate (SIGTERM) is not enough and we have to kill the
proces (SIGKILL), otherwise the process is stuck forever and taking
hours to complete and finally timeout in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were missing the reason and reporting 'Unknown',
check for failure and set the reason.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The default vertical tiling is designed for displays that are rotated 90
or 270 degrees from normal orientation. Devices where pixel data
advances first horizontally then vertically requires horizontally-tiled
data.
Similarly when generating upright text on a row-major-order monochrome
display the most significant bit may encode the pixel at the lowest
horizontal position.
Add options to control horizontal vs vertical tiling, and msb vs lsb
pixel order.
The commit also generates the representation of the glyph in comments at
each row.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Rename internal macros to use Z_ prefix instead of _K..
Those macros were missed when we did the global renaming activities.
Fixes#24645
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In case of flashing (which is typically used with OpenOCD)
we do reset of the target after programming application binary
in the non-volatile memory.
In case of Elf execution we need to reset the target before
loading Elf sections so that we might be sure our target
is in sane & expected state before we start execution.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Add option --report-suffix to append custom string to all generated
files. This is going to be useful for generating results for a specific
version, i.e. --report-suffix zephyr-v2.2.0-1814-ge737761d23
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes: #24576
The name of the symbolic link would be constructed using the full path
name to the target folder.
This is not needed and caused the issue raised in #24576.
This has been fixed by no longer using the toplevel target directory
in the link name, for example:
Old style: _project_zephyr_workspace_zephyr_include_sys
New style: include_sys
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a __WARN("Macro is deprecated") to all DT_<COMPAT>_BUS_<BUS> macros
now that all in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a __WARN("Macro is deprecated") to all DT_INST macros now that all
in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The variables with the STATIC type aren't read.
The commit 877fc59e30 introduce the read of CMAKE_PROJECT_NAME
which could be defined in CMakeCache.txt file like that:
CMAKE_PROJECT_NAME:STATIC=MyProject
If STATIC type is not managed, the CMAKE_PROJECT_NAME isn't set and
CMake is always force to run again
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
This option prefers serial device names which are stable
across device plug/un-plug on platforms that support it (currently
just Linux, via /dev/serial/by-id).
This feature is opt-in as not all manufacturers include the
appropriate metadata for udev to generate unique names for their
devices.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Create support for muxed UARTs which are attached to a real
UART and which use GSM 07.10 muxing protocol to create virtual
channels that can be run on top of the real UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix two issues:
1. The script assumes the default CMake generator build tool
platform is installed. On Linux at least, that's Make instead
of Ninja, but Make might not be installed since Zephyr recommends
Ninja. On Windows, that might be VS Code or nmake.
Calling `cmake -P pristine` instead of `cmake --build <path>
--target pristine` has the benefit of removing the dependency on a
build command, and hence the default generator is not relevant.
2. It also assumes run_cmake() returns control, and therefore pristine
can be run.
However, if the cmake command fails hard (say, due to issue #1
before this patch), run_cmake() throws an exception instead.
Fix that by trying to run the pristine target in a finally block
instead, and adding some manual cleanup steps in case the build
system is in a bad state and pristine fails too.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Pass EXTRA_DTC_FLAGS to kconfig so the EDT object we have in
kconfigfunctions can use that to set warn_reg_unit_address_mismatch
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that the main Zephyr build system (and the documentation's) no
longer require ZEPHYR_BASE in the environment, the sanitycheck
script's continuing to require this makes less sense.
We can easily find ZEPHYR_BASE starting from a given sanitycheck
script, so let's just do that. Preserve the ability for a user to
override the ZEPHYR_BASE location in the environment as usual for
compatibility.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The patch specification should not be conditional on failing to match
an identifier, as some replaced values are identifiers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Always generate the comment text specifying a node's path identifier.
Add the DT_ prefix so it matches the actual macro usable from C. This
will make a following patch which adds support for accessing a node's
parent result in a generated header file which is easier to read.
Put the node's path right after "Devicetree node:" in the comment.
This makes the section for that node easier to grep for.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The root node's z_path_id value for the duration of this script
doesn't match the value DT_ROOT is defined to in devicetree.h.
I didn't notice this because the root node's compatible doesn't have a
matching binding in practice, so no macros are generated for it, but
we're about to start looking at node parents explicitly and this is an
issue for that. Fix it so the root node's z_path_id is "N", since
DT_ROOT is the token "DT_N".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_REG_IDX_<idx>_EXISTS 1
DT_N_<node-id>_IRQ_IDX_<idx>_EXISTS 1
This will allow us to use IS_ENABLED() in DT_REG_HAS_IDX and
DT_IRQ_HAS_IDX which matches behavior of other DT_*_HAS_* macros as
well as lets use these with COND_CODE_1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When retrying failed tests, make sure we keep old results and only
update those tests that were retried.
Also, remove duplication of code for creating the reports and make the
report function a bit more generic.
sanitycheck.xml is now listing or tests, not only the test application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This can be used from Kconfig to detect if any enabled nodes of a
compatible are on a bus. This can be useful if a compatible might
appear on multiple buses, to enable them by default from application
code without having to change prj.conf settings depending on what's in
the devicetree.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_P_<prop-id>_NAME_<NAME>_EXISTS
DT_N_<node-id>_P_<prop-id>_IDX_<idx>_EXISTS
This will be useful to check availability of named or indexed
property like dmas/dma-names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The last user of the .conf file format DTS data has been removed. We
can now remove the generation and associated support for the .conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If there is an error in the CMake configuration phase (this can happen
if a script run using execute_process() fails, for instance), the
build system is incompletely generated and future attempts to run
'west build' will fail. This manifests in the following error:
Error: could not find CMAKE_PROJECT_NAME in Cache
Whenever we see that the cache exists but this variable is missing,
let's just force CMake to run again. This avoids the error in my
testing and is a bit more user friendly. I've seen multiple users
asking what to do in this situation; the answer is always "just build
it again", so we might as well do it for them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
breathe v4.15.0 was just released and fixes some compatibility issues
with latest sphinx, the combo works, however with many warnings that we
still need to either fix or whitelist. This is temporary until we are
able to use those new versions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
