Update the `peripheral` and `peripheral_ht` samples to use the
indication `destroy` callback to determine when the indication has
completed, instead of using the value callback of the first active
connection.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
To make it runnable in the sanitycheck necessary to add
capture output, because that sample runs infinite period of time
and can not finished by itself. To avoid timeout error
in the sanitycheck I added capture output for a several times.
Also added one more tag to describe that it is a power
management sample.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The goal of this sample application is to measure the performance loss
when a user thread has to go through a system call compared to a
supervisor thread that calls the function directly.
Signed-off-by: Nicolas Royer <nroyer@baylibre.com>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
re-enabling this test was premature, it still crashes very often
due to two known issues affecting x86 64-bit. Filter out for
every 64-bit x86 platform until those bugs are solved, which
will reduce CI failure noise.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Enables the fat_fs sample on the mm_swiftio board by adding a
board-specific Kconfig overlay, and adding sdhc to the list of
board-supported features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The sample was producing quite a few `<log_strdup alloc failed>`
warnings when running in default configuration on qemu_x86. Increase the
log_strdup buffer count to prevent that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add bootstrap section to the documentation, explaining how to configure
the Leshan Demo Bootstrap Server locally and run the sample.
Update the download link for the Leshan Demo Server, according to the
upstream Leshan documentation.
Fix bullet list with Leshan security parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlay-bootstrap.conf which allows to easily configure the sample
to use the bootstrap server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The es-WIFI driver is used by Inventek's es-WIFI shields. This enables
wifi sample to build all variations to ensures that dependencies are
meet.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add support for the Solomon SSD1306FB device to the CFB custom font
sample.
Convert sample to use DT_LABEL() for obtaining the device label instead
of hardcoding it.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
WebUSB sample is using BOS descriptor. Because of that
the bcdUSB field of device descriptor is set to 0x0210.
This requires for the BOS descriptor to have LPM support.
LPM support use additional descriptor that the HOST can
read by requesting BOS desc. The descriptor is called
Extension descriptor and is specified in `USB Link Power
Management ECN` document considered a part of USB 2.0
spec.
This patch adds missing part of the BOS descriptor and
fixes issue with webUSB sample not passing i'LPM L1 Suspend
Resume Test' from USB3CV test tool.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Removes text from the readme of the onoff_level_lighting_vnd_app
claiming buttons control the LEDs before provisioning, as it's not
accurate.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
This sample allows to test the led-pwm driver. The first "pwm-leds"
compatible device instance found in DT is used. For each LEDs attached
to this device (child nodes) the same test pattern (described below) is
executed. The LED API functions are used to control the LEDs.
Test pattern:
For each PWM LEDs (one after the other):
- turn on
- turn off
- increase the brightness gradually up to the maximum level
- blink (0.1 sec on, 0.1 sec off)
- blink (1 sec on, 1 sec off)
- turn off
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This fixes the documentation instructions for building the SMP Pi
sample program, which incorrectly listed an underscore instead of
a path separator slash.
Signed-off-by: Steve Winslow <steve@swinslow.net>
It is useful to see the name of the handler thread for debugging
purposes so set it when starting the handler thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Saves quite a bit of memory on MMU-based systems which manage
page tables at the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory domains can be very expensive to instantiate. Demonstrate
how the default memory domain can be re-purposed for an
application, much like how the main thread already is.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Split CP and PD samples into dedicated directories as the difference
between the two are expected to grow with time. Also, do some
refactoring.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Minimize number of exported methods by unifying all osdp_cp_send_cmd_*()
as osdp_cp_send_command().
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Adds a test case listing in sample.yaml of the mesh_provisioner sample,
building on qemu and the Nordic nRF51 DK to ensure that the provisioner
role is built in PRs.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Power management sample for that board has very
confusing name that should be changed to something
more understandable.
Current name sample.board.sample.board.mec15xxevb_assy6853
I suggest to have new name
sample.board.power_management.mec15xxevb_assy6853
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
LORAWAN_ACT_* should be assigned instead of LORAWAN_CLASS_*. Previously
used LORAWAN_CLASS_A has the same integer value as LORAWAN_ACT_OTAA, but
update code with the latter to use the proper type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The overlay file defines an i2c interface for the
Feather nRF52840 Express and the Adafruit BME680.
Also adds the platform to the test build configuration.
Signed-off-by: Patrick K. Moffitt <patrick@moffitt.com>
Add commands to suspend or resume the GSM modem. These commands
might not be enough as at least the SIMCOM 808 modem requires
that the modem is reset when it is resumed, and this application
does not do any reset atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add nucleo_l552ze_q_ns board to the allowed list of platforms
for the tfm_ipc sample. This allows the sample to be built for
the nucleo_l552ze_q_ns platform by sanity check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the name of the sample in the .yaml file so it matches
the sample directory, and does not collide with tfm_ipc.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the samples' documentation we update the requirements
for building TF-M binaries according to the latest upstream
TF-M documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation on how to build and run the TF-M integration
samples on nRF platforms.
The arm-none-eabi-gcc does not need to be on the PATH anymore
for building and running the tfm_ipc sample on nucleo so remove
the note from the sample docs.
Fix some paths for TFM binaries for the LPC board as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adapts the DTS overlay for nucleo_l552ze_q_ns
board, to comply with the changes applied in the flash
layout of the TF-M build.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
