tls rely on both arch has tls and toolchain support tls, add filter:
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE for
some tests enabled tls.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Add a new test for k_busy_wait and cpu_hold
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add unit tests for Direction Finding set of connectionless TX
CTE parameters. Enable DF in nrf52_bsim board.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Added test for reseting CC timeout. CC is reconfigured just beofre
expiring of the first CC. It is expected that first setting will never
expire.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Whenever a devicetree binding defines a string property whose
enumerated values are all tokenizable, generate C macros for each
property value that are the corresponding tokens.
Note that "token" is distinct from "identifier": both 'foo' and '123'
are valid tokens, but only 'foo' is a valid identifier. We permit some
strings which are not valid identifiers in anticipation that the
generalization may be useful, e.g. when defining macros that paste the
token onto a prefix that makes the whole thing an identifier.
Fixes: #21273
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add the new x86 board to the x86/info test list, and exclude it from
the cmsis_rtos_v2 test (something that seems to be needed for all 64
bit x86 architectures).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modify test .yaml file, to allow the .gap_filling test
variant to execute only on cortex-m33 platforms with
sufficient number of MPU regions. Copy pasting the
configuration from mem_protect/userspace test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Skip the test_disable_mmu_mpu test case for
Cortex-M non-secure builds, since the test
may enter a BusFault which is not banked
between security states and the system
may hang.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Skip the scenario of accesing a faulty address
in test_string_nlen for Non-Secure Zephyr builds,
because accessing faulty addresses in this case
triggers SecureFault that may hang the system
completely.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Show the page table layout for a user thread. This
may be somewhat different from a supervisor thread
especially if KPTI is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is really bad when you start having doubts about those edge cases
in your sleep. Better have it validated here instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Test macro DT_PROP_BY_PHANDLE_IDX_OR. There are two tests, one when
the property exists and other when the property is not set.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new testcase to tests/bluetooth/mesh that builds mesh with
extended advertising.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
While documenting the float conversion code, I found there was room
for some optimization. In doing so I added test cases to cover edge
cases e.g. making sure proper rounding is applied and that no loss
of precision was introduced. Compiled code should be smaller and
faster.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Use of a printk that supports floating point changes the stack
requirements causing kernel.common.stack_protection_arm_fpu_sharing to
fail. The test doesn't need this capability so revert to nano
formatting.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove test cases that exercise the deprecated mem_pool features of
the pipe utility.
Note that this leaves comparatively few cases left, we should probably
audit coverage after this merges and rewrite tests that aren't
interdependent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The mailbox and msgq utilities had API variants that could pass old
mem_pool blocks through the data structure. That API is being
deprected (and the features were obscure), so remove the internal
support.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The sys_mem_pool data structure is going away. And this test case
didn't actually do much. All it did was create a sys_mem_pool in the
app data section (I guess that's the "mem_protect" part?) and validate
that it was usable. We have tests for sys_heap to do that already
elsewhere anyway; no point in porting.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On userspace platforms, this test needs a little bit of kernel heap.
The old mem_pool number was specified without metadata overhead
(i.e. it reflected 128 bytes of actual data available and the metadata
was stored silently somewhere else), where the new heap specifies the
size of the contiguous buffer in memory that stores both data and
chunk headers, etc...
Increase to 256 bytes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written to use a TINY system heap (64 bytes) from which
it has to allocate on behalf of a userspace process. The change in
convention from mem_pool (where the byte count now includes metadata
overhead) means it runs out of space. Bump to 192 bytes. Still tiny.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These two test cases were making whitebox assumptions of both the
block header size and memory layout of an old-style k_mem_pool that
aren't honored by the k_heap allocator. They aren't testing anything
that isn't covered elsewhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The kernel resource pool is now a k_heap. There is a compatibility
API still, but this is a core test that should be exercising the core
API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The k_mem_pool allocator is no more, and the z_mem_pool compatibility
API is going away. The internal allocator should be a k_heap always.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These were implemented in terms of the mem_pool/block API directly
(for complicated reasons, the pointers returned from this API may have
been allocated from allocators other than the single system heap).
Have them use a k_heap instead.
Requires a tweak to one test which had hard-coded an assumption about
the header size.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove the MEM_POOL_HEAP_BACKEND kconfig, treating it as true always.
Now the legacy mem_pool cannot be enabled and all usage uses the
k_heap/sys_heap backend.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Set work item's flag in pending state, it cannot be append to a
workqueue. Improve branch coverage of function k_work_submit_to_queue().
Signed-off-by: Ying ming <mingx.ying@intel.com>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a initial ISO broadcast test case that simply
creates, waits and terminates a BIG using the ll API.
The newly created test directory can be expanded to contain
connected ISO (CIS) tests as well in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
