Add macros that check that we are not trying to use already
freed net_buf and vice versa.
Change-Id: Ifdb6a7e24cd6d7a0de46fa7b991c358ea8828d6f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This slip driver is needed for sending packets outside of qemu.
Change-Id: Ifc37181094ddebce08d97ae889f3a58c03d01ae1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to use correct IPv6 address when registering UDP
socket.
Change-Id: I38f55bc16f72a71cb8cd58d20b3288be2f4cd475
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_reply() can be used if the application wants to reply
something to peer right after receiving the data. The function
will reverse the source and destination addresses and ports,
and set the uIP internal structures in such a way that the
reply is possible. Using this function saves the application
from allocating a separate net_buf for just sending simple
message back.
Change-Id: Ia960c83b77a8f300222159ee085fed99e2b007c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
One kb seems to be enough for the stack.
Change-Id: Ib1e3a7e97bf7d69ddd4b3028fe7dd6413a0098d4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must make sure that the UDP socket can be registered only once.
Change-Id: I90e0dac2b1b234fd7f899a0e41442c13f0c8bdd7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit uses the simple UART driver to pass slip data between
qemu and host.
User needs to create a network device (tun) in host that is
connected to qemu via slip protocol. The tunslip6 process
acts as a gateway and passes packets between qemu and host.
See net/ip/contiki/tools/README file for details how to use and
configure the slip in host.
This is meant for testing the uIP stack.
Change-Id: I82bb87a76485a07ddf5de9ae91fe3d49a0e20658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make tcpip_input() to return 0 if there is an error when
processing the packet. Value != 0 indicates a successfull
packet processing and in this case the application will
free the packet.
Change-Id: I4aaeb5f0039cfbe25f7238a144964e31a8204148
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When read from the Rx FIFO, pass the network buffer to the uIP IPv6
stack using the tcpip_input() function. As the event is handled, not
all cases where the buffer is to be discarded can be detected.
Thus, if ICMPv6 errors will not be sent, indicate that the packet is
to be dropped by setting its length to zero.
Change-Id: I49f69011685e39759ba25ebb07670308382a5ca8
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To make it easy to periodically verify that we have sane stack sizes
it's helpful to have some code to evaluate how much of the stacks are
used. There's already a CONFIG_INIT_STACKS option which pre-fills the
stacks with 0xaa bytes, so we make use of it and in case the option is
enabled run the extra code to evaluate how much of each stack was
used. The trigger for the evaluation is a disconnection event.
Copied from Bluetooth sub-system.
Change-Id: Ic04ff83f682dc9b57afb69e164b972ffd9b860ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to waste CPU cycles initializing the stack variables.
Change-Id: I0c517125ef37f7d0de4fd0040c4b4700536cd7c7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move packetbuf from net_buf to net_mbuf, update 802.15.4 stack
with net_mbuf (which is smaller in size, and mostly wrapper for
packetbuf) and split sicslowpan(ipv6/sicslowpan.c|h) functionality
to compression and fragmentataion. This patch contains
null_compression and null_fragmentation which is exactly what
uip_driver.c|h does.
Change-Id: Ifee359e20aa57a50fb00c9ce049d9476b2ac67e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the uIP output function in order to call the send function in the
registered driver. Do driver initialization and checking cleanups.
Change-Id: I18c9b551320d15fa2619a077d1224f5e521c53ed
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After an IP packet has been (reassembled and) received, the driver
submits the IP packet to the IP stack.
Change-Id: Icbd1e7740ce59db16bc1d61002420e86ab101d2d
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now we properly register UDP listener and specify callback to be
called when UDP packet is received.
Change-Id: Ia9fded780d53ba2fbfad6a34927dcbd92e42a9e8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to know if we have registered a socket listener, otherwise
we try to register UDP handler too many times.
Change-Id: I060150d01eb149f2a2a6a332d18e0142e5cb7a5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The buffer is released by the driver or some other lower stack
element.
Change-Id: I0ced57df4d95213bae2bbe591a41da6178f4c272
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the Contiki simple UDP API when sending and receiving the
application data.
Change-Id: I39a379f30c8f7febbea223fcf8f8702faf82e39e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Needed only in net_init.c so did not put the prototype into .h file.
Change-Id: If84e835d32bcfafd8e403ffa4def51fa72e0aa3e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network driver should call this when it knows the device MAC or
EUI-64 address.
Change-Id: Ie03a80fcdb9a10cd1cb15f12037b3802da13bca9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Call relevant Contiki uIP functions to setup the internal
structures in the uIP stack.
Change-Id: If64df1543d66d0ff378c12f371aa2c06fb2fde0a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network context defines a network connection.
Change-Id: I29a186be6c9de9d824f10b6442fa1dfd3711d24d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions to receive data from apps and transmit it to network, and
receive from network and pass data to apps.
Change-Id: I1b1b8c041e6c5e20294081d2cd403636e9909cdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
