If we receive an IPv6 packet with organisation scope multicast
address FF08:: then we must drop it as those addresses are
reserved for organisation network traffic only.
Fixes#10961
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with site scope multicast
address FF05:: then we must drop it as those addresses are
reserved for site network traffic only.
Fixes#10960
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with interface scope multicast
address FF01:: then we must drop it as those addresses are
reserved for local network traffic only.
Fixes#10959
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions are declared as noreturn but they do in fact return (when
control reaches the end of the body, since it doesn't enter an infinite
loop, it doesn't call other "noreturn" functions, etc.)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Macro is used to create contiguous bitmask between the
arguments passed to the macro.
BITS_PER_LONG is computed as the multiplication of predefined
macros `__CHAR_BIT__` and `__SIZEOF_LONG__`.
Both gcc and clang support these predefined macros.
With this change, replace the redundant defintions of
GENMASK with the new generic macro available.
Fixes#10843
Suggested-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
struct segment_selector is defined but never used. Besides that, this
tag identifier was clashing with other identifier, what is an undefined
behaviour in C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
struct k_thread already has a pointer type k_tid_t, there is no need for
this definition to tcs.
Less symbols/names make the code cleaner and more readable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
1. Avoid outdated references to registers of a particular hardware
in the generic API.
2. Propagate specifications/clarifications of ISR behavior to
docstrings of more functions which guaranteed to work only in ISR.
This continues work previously done in:
38f78e80cf0fdc9b5b12
etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
print a deprecation message when using deprecated SYS_LOG macros.
Everything needs to move to the new logger interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes few issues in queue.c. This patch also changes
the return type of k_queue_alloc_append and k_queue_alloc_prepend
from int to s32_t.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When using C++ exceptions in a Cortex-M, the linker return a warning:
warning: orphan section ".ARM.extab"
.ARM.extab section containing exception unwinding information.
This section is missing in the linker script for Cortex-M.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Its been at least 2 releases since we marked a number of the sensor enum
values as deprecated. Lets remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit introduces k_sleep() return value, which provides
information about actual sleep time. If the returned value is
not-zero, the thread slept shorter than requested, which is
only possible if the thread has been woken up by k_wakeup() call.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit introduces usage of likely()/unlikely() macros in order
to speed up the entropy_get_entropy_isr() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Can choose the C++ standard (C++98/11/14/17/2a)
Can link with standard C++ library (libstdc++)
Add support of C++ exceptions
Add support of C++ RTTI
Add C++ options to subsys/cpp/Kconfig
Implements new and delete using k_malloc and k_free
if CONFIG_HEAP_MEM_POOL_SIZE is defined
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
This adds new API fuction to update running advertising data.
It will remove the need of advertising restarting.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added dummy backend which can be enabled with Kconfig. By default it is
disabled because it needs the same amount of memory as other phisical
backends. It shall be use only for commands testing purposes.
Improved shell_execute_cmd function, now it clears command context
before new command will be executed.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
These macros are helpful for using the configuration client API with
periodic model publication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a possibility to reject incomming LE Connection request
due to insufficient authorization or encryption key size.
This is needed for qualification purposes
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds support for returning various return codes from
the channel accept callback.
This is needed for implementation of incoming connection
authorization for certification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When user was typing a new command and next pressed an up arrow
shell has displayed previously executed command. Next it was not
possible to display back currently edited command using a down arrow.
Fixes#10766.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Extended logger to support optional log message prepending with
function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended supported number of arguments in log message. Support for
messages consisting of more than 2 chunks had to be added. So far
messages could consist of one chunk (up to 3 args) or two chunks
(2 args in first chunk and 7 in second chunk). Once 2+ chunks
support is added number of arguments is techinically limited to
15 (4 bit field). log_core and log_output extended to suppor 10
arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
write() function is not supposed to change buffer passed to it, so
propagate const pointer param to all write-like functions used/defined
in this file.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
XCC doesn't provide these builtins so we have to define them
with minimal functionality for testing.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
(Previous patch set was reverted due to issue with priv_stack.
Resubmitting after fixing the faults caused by priv_stack.noinit
not at the end of RAM.)
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Fixes#10473, #10474, #10515.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the priviledged stack at the end of RAM.
This combines PR #10507 and #10542.
Fixes#10473Fixes#10474Fixes#10515
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Cypress PSoC6 specifies some input sections in the startup
scripts. These sections (.heap, .stack, etc.) need to be placed
at correct location.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the SoC to specify some additional linker script
fragments into the bss, data and read-only data sections.
For example, the Cypress PSOC6 has a few input sections that
must be put into bss and data sections. Without specifying
these in the linker script, they are consider orphan sections
and the placement is based on linker heuristic which is
arbitrary.
POSIX is not supported as the main linker script is
provided by the host system's binutils and we have no control
over it. Also, currently Xtensa SoCs have their own linker
scripts so there is no need to this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Changed return value of function: shell_cmd_precheck from bool to
int. Now it returns:
0 when argument count is correct and help print is not requested
1 when help was requested and printed
-EINVAL on wrong arguments count
This change simply shell_cmd_precheck usege in command handlers.
2. Unified all commands in shell_cmd.c file.
3. Fixed a bug where help was not printed on wrong argument count.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The logger will add the function name automatically if
CONFIG_LOG_FUNCTION_NAME is set, so no need to do it here in that case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
