These calls are not accessible in CI test, nor do they get built on
common platforms (in at least one case I found a typo which proved the
code was truly unused). These changes are blind, so live in a
separate commit. But the nature of the port is mechanical, all other
syscalls in the system work fine, and any errors should be easily
corrected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Variable pages_per_bank has been introduced to ease page erase
in dual bank configurations. This has been implemented using
FLASH_OPTR_DUALBANK definition.
It happen that this was not taking into account L4+ series that
use FLASH_OPTR_DBANK instead of FLASH_OPTR_DUALBANK. This lead
to compilation issue for this driver in case of L4+ series.
So, this patch is adding the support of FLASH_OPTR_DBANK definition.
Besides, FLASH_OPTR_DUALBANK (as FLASH_OPTR_DBANK) are actually
defining availability of an option byte to configure use of Dual
Bank. So besides of its definition, its value in flash OPTR register
should be checked to ensure Dual Bank configuration is used.
This patch is taking this into account by adding the check of this
byte. Error -ENOTSUP is returned in case Single Bank is configured
since it has not be validated yet (in case Dual Bank is possible but
not configured).
Fixes#18246 for nucleo_l4r5zi
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
FLASH_NATIVE_POSIX is defined in drivers/flash/Kconfig.native_posix,
which is source'd within an 'if FLASH' in drivers/flash/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
FLASH_SIMULATOR is defined in drivers/flash/Kconfig.simulator, which is
source'd within an 'if FLASH' in drivers/flash/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
SPI NOR devices require that writes be performed within only one page at
a time. There is no such limitation on reads. Remove the code that
forced reads to be performed in 256-byte chunks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The code failed to increment the address after completing a partial
write, causing writes that cross a page boundary overwrite at a page
level.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit fixes following issues in printf formatting used by flash
drivers:
- cast values of type off_t to long to remove warnings generated when
compiling with Newlib.
- use 'z' modifier (as in "%zu") to print values of type size_t
- prefix all hex numbers with '0x'
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Up to now, the only SOC that was supported in the STM32L496 series was
STM32L496XG with flash of 1MB. With the recent support of STM32L496XE,
this implementation is not correct. This patch adds support for the
other SOCs that come with flashes of 512KB and 256KB.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
The previous code limited the length of a write to the size of a page,
but did not check whether the starting position was far enough into the
page that the write would still cross a page boundary.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This was always intended to be a bytestring rather than an array, but
full support was missing. Since that has been addressed switch it to
the preferred format.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The driver historically used the erase block size (64 KiBy) as the page
size. There are other viable "sector" sizes, and for some applications
this one may be too large. Allow the application to specify the desired
flash page size.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The JEDEC API defines the hardware page, sector, and block sizes.
Deprecate the Kconfig settings, remove the `erase-size-block` property,
and add `has-be32k` to indicate that 32K-byte erase is supported.
Rework the driver to use the constants instead of configured values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash size calculation was don with assumption that flash page size
is always 1 KB and flash size was parameterized with such granularity.
This patch correct this bug.
Flash pages number under statistic can't be calculated via preprocessor
anymore - thus are parameterized via Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It Need to start using DT_FLASH_SIM_xxx labels after sim_flash was
un-chosen as zephyr,flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
flash_erase cannot erase a page from the STM32xx SOC flash. It seems
that the erase wait time is not enough and against to what the SOC's
datasheet states. As a result this patch doubles the wait time.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Erase operations must be aligned to the erase-size.
- Don't need to perform an alignment check on a full erase. The offset
is not used in this case.
- Don't need to perform alignment check on a sector sized erase, as
this alignment is checked on entrance to the function.
- Removed some whitespace.
Signed-off-by: Ryan C Johnson <ryan.johnson@flex.com>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore part of the data that is written to the simulated flash memory.
This parameter works together with max write calls parameter.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore erases to the simulated flash memory after a certain number
of flash erase calls has been executed.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new runtime parameter to the Flash Simulator. It can be used to
ignore any writes to the simulated flash memory after a certain number
of flash write calls has been executed. This behaviour is useful for
simulating power down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Statistic for flash has limitation regards number of pages possible to
be counted. This path introduces check for that in source file as it is
not possible to preserve the limit in Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
