Just as was done for GPIO flags, make PWM flag accessors default to 0
when there are no flags. This makes the API easier to use correctly.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The vast majority of devicetree bindings for GPIO controllers are
expected to have "flags" cells in their respective GPIO specifiers,
but that's not required by the specification and we want to make sure
to support that.
However, so many drivers and applications initialize gpio_dt_flags_t
values that it's silly to require each and every one of them to check
for the flags value and fall back to the sensible default flags value
of 0 when it does not exist.
Make the API easier to use correctly by returning 0 in the devicetree
core API for accessing flags, whenever there are no flags defined.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a variety of property and specifier cell accessors that fall back
on a default value supplied by the caller if the devicetree does not
contain the requested data.
This is useful for avoiding use of COND_CODE_1() and similarly tricky
macros in applications and drivers.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Reorder the instance number property access macros. The non-instance
number ones appear in this order: DT_PROP(), DT_PROP_LEN(),
DT_PROP_HAS_IDX(), DT_PROP_BY_IDX(), DT_LABEL().
Improves readability slightly by moving code around so INST versions
appear in the same order as non-INST versions.
No functional changes expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
API did not cover a case when uart_rx_buf_rsp is called when receiver
is already disabled. It may happen if uart_rx_buf_rsp is called too
late and active transfer is already finished. In that case -EACCES is
returned.
Some implementations already returned that error in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This had been copy-pasted between linker scripts, create
a central header for it.
The linker scripts for xtensa and posix have very different
structure and have been left alone.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Thread objects were moved out of the stack a long time ago.
Replacing this incorrect information is some clarification
on acceptable size values to pass in.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Define a macro which takes as input a requested stack buffer
size, and returns the size of the stack object needed to
contain it.
An optional architecture interface is provided, though many
arches will be fine with the default implementation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some forthcoming macros will need this. This may now
be individually defined by arch code instead of hanging
off of ARCH_THREAD_STACK_DEFINE.
Some additional details added to the documentation string.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This can be in inline function, which gains us some
type safety.
Temporarily define Z_STACK_PTR_ALIGN() in terms of it,
slated for removal once some other changes land.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A new macro Z_THREAD_STACK_OBJ_ALIGN() defines the alignment
of the lowest memory address of a stack object.
Related is a new arch interface ARCH_THREAD_STACK_OBJ_ALIGN()
which lets arches specifiy this. ARCH_STACK_PTR_ALIGN or a
power-of-two ceiling is used if not defined.
The default stack macros now use this instead of hard-coding
ARCH_STACK_PTR_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Let's normalize the callback like it is done in other APIs.
This will avoid the need to do not so nice code (storing the ipm device
pointer as global, or else) and more importantly will help to move all
device instance to constant.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each and every driver had to redeclare the type to store such
pointer, now they will be using this typedef.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Normalize callback like other APIs.
This clarifies the callback usage. It will also help to switch all
device instance to constants.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All other API provide the device pointer to the callback it's going to
call. So fixing this in UART.
This will avoid passing the actual device pointer as a user data (thus
enabling user data for something else).
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All other API provide the device pointer to the callback it's going to
call. So fixing this in UART.
This will avoid passing the actual device pointer as a user data (thus
enabling user data for something else).
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/port/dev
dev is being used everywhere else so let's rename port to dev.
And the parameter documentation should be the same for all.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds basic support for the clock controller used in
lpc11u6x MCUs.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds a bindings for the clock controller used in lpc11u6x
MCUs. It also adds a clock-controller node for the lpc11u6x soc series.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This patch adds the DT nodes and binding for the pinmux registers,
aka IOCON (I/O control), found on the LPC11U6x MCUs.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Drop unused ppp_parse_options_array() function and 'struct
ppp_option_pkt' data type. Both were used in initial PPP implementation,
but are not longer needed after recent PPP refactoring.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Remove unused ppp context members ('my_accepted', 'peer_accepted'),
which were supposed to contain accepted options. Options are now
negotiated and stored in same place, which is 'my_options' and
'peer_options' structure members.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was no generalized way how to handle negotiation of "my
options" (those sent with Conf-Req packet to peer). Peer response for
proposed options and their values were not tracked in any way, so
rejected (by peer) options were sent over and over again in subsequent
Conf-Req packets. In case of IPCP it means that all sent options such as
IP_ADDRESS, DNS1, DNS2 were mandatory for being supported by peer in
order to successfully finish negotiation. For example if 'pppd' was the
configured peer (e.g. when using with QEMU and net-tools scripts),
without ms-dns being configured (which is the default), then "my
options" negotiation failed.
Introduce generalized mechanism for negotiating "my options", so it is
easier to maintain current set of supported options and easily add new
options to the implementation in future. FSM instance inititialization
function can provide information about supported "my options".
Information is is passed as a table of 'struct ppp_my_option_info'
containing:
* option code (type),
* callback for adding option to Conf-Req packet,
* callback for received Conf-Ack with that option,
* callback for received Conf-Nak with that option.
Store also runtime information about each negotiated option. First of
all remember which options have been rejected, so they are not sent to
peer once again in the next Conf-Req packet. This will solve issue with
IPCP negotiation when peer doesn't support DNS1 or DNS2 options. Keep
also track about which options have been acked, so such information can
be verified before bringing FSM instance up.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt API to assemble Configure-Req messages. Compared to net_buf
API it allows us to simplify code.
Remove append_to_buf() helper functions, as their functionality is now
totally replaced by net_pkt API. Additionally net_pkt API handles data
that wraps several net_buf packets, which was not the case with
append_to_buf().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt instead of net_buf API for replying to Configure-Req. We use
the fact that for now we reply with either Configure-Ack or
Configure-Rej only. In both cases we can allocate net_pkt ahead, because
we know its maximum length (which is equal to length of received
Configure-Req packet).
Make also an improvement in generic FSM code and reply with
Configure-Rej to all Configure-Req for which there is no config_info_req
callback set. Use that to drop LCP specific Conf-Req handling code,
because there is no option properly supported there yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread API is not thread safe, therefore it shall be protected
from being preempted by OT thread, or other thread issuing API calls.
The problem showed up after a recent OpenThread upmerge, where changes
in the Joiner class made this problem visible. W/o extra protection,
`otJoinerStart` call can be preempted by the OT thread, leading to an
unexpected behavior.
Introduce new function to allow to lock any API operations for others.
Anyone willing to call OT APIs, shall lock the mutex first to get
exclusive access to the stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There may be value in being able to rename a subtree, but there is no
identified need to be able modify the text of an assigned subtree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
is_init field is useless, because there is only single code path that
always sets it to true before using it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
NOP instruction is available via builtin for ARC so get rid of all
ASM inlines with NOP/NOP_S instructions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Zephyr has generic find_msb_set and find_lsb_set implementations.
They are based on builtins so they are optimized enough.
Drop custom ASM implementation.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add 64bit source_address/dest_address fields support.
This is needed in situation where DMA controller is capable
of handling more than 32bit source and destination addresses.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
The EEPROM device doesn't mutate the source data it's given, so update
the API signature to reflect this fact.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The NET_IF_OFFLOAD_INIT() macro was not converted to use
Z_STRUCT_SECTION_ITERABLE() macros in commit 62580748e5
("net: Use section foreach macros"). This meant that for those boards
that use offloaded network stack, the network interface was not created
and network connectivity was lost.
Fixes#27037
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is called when the USB host changes the virtual baud rate.
This is used by Arduino style boards to signal that the board should
reset into the bootloader.
Signed-off-by: Michael Hope <mlhx@google.com>
There may be value in being able to rename a subtree, but there is no
identified need to be able modify the text of an assigned subtree
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch nSIM from custom ARC UART to ns16550 model. That will
allow us to use zephyr images built for nSIM on other platforms
like HAPS, QEMU, etc...
This patch do:
* switch nSIM board to ns16550 UART usage
* change nSIM simulator configuration to use ns16550 UART model
* drop checks for CONFIG_UART_NSIM in ARC code
* update nSIM documentation
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The Z_STRUCT_SECTION_ITERABLE() provides an alignment so remove
the 32 byte alignment for net_if and ppp_protocol_handler structs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Updated nrf clock control driver to use onoff service for managing
multiple users.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Single work object for whole fsm was not being able to handle more than
single packet at a time. Because of that we have overwritten already
scheduled packets, resulting in fsm timeout and net_pkt leak.
Use net_pkt work object instead, so we can safely schedule more than a
single packet.
This commit also drops workaround for qemu_x86 unit testing.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is following error when compiling applications using smp:
/zephyr/include/mgmt/smp.h:77:16: error: field 'zst_work' has \
incomplete type
77 | struct k_work zst_work;
| ^~~~~~~~
/zephyr/include/mgmt/smp.h:80:16: error: field 'zst_fifo' has \
incomplete type
80 | struct k_fifo zst_fifo;
| ^~~~~~~~
Fix that by adding missing kernel.h include statement in mgmt/smp.h.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Conditional API was removed by preprocessor which violates zephyr
coding style. Removed ifdefs around conditional API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A hack was required for the loapic code due to the address
range not being in DTS. A bug was filed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Three variants provided:
- Drivers with one MMIO region to manage
- Drivers with multiple MMIO regions to manage
- Drivers or driver-like code which doesn't use Zephyr's device
model
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be the interface for mapping memory in the kernel's
part of the address space, which is guaranteed to be persistent
regardless of what thread is scheduled.
Further code for specifically managing virtual memory will end up in
kernel/mmu.c.
Further defintions for memory management in general will end up
in sys/mem_manage.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixing issues with recent versions of breathe 4.19.2:
WARNING: Unparseable C cross-reference: 'struct device'
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 6]
struct device
------^
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add bond_deleted callback so that the application can keep track
of when bond information is deleted in the stack.
Bond information can be deleted by the application through bt_unpair
or automatically by the stack in some cases, e.g when
CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled and the oldest bond
is overwritten.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Current implementation of net_ipv6_send_rs() uses
net_ipv6_addr_create_ll_allnodes_mcast() for creating RS packet.
As result we send RS packet to all-nodes destination [FF02::1],
but RFC4291 requires all-routers destination [FF02::2] for RS packets.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
This patch allows the `SW_VECTOR_RELAY` and
`SW_VECTOR_RELAY_CLIENT` pair to be
enabled on the ARMv7-M and ARMv8-M architectures
and covers all additional interrupt vectors.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Although LwM2M engine uses cooperative threads, the internal `send()`
implementation might trigger context switch when it calls a kernel
function, therefore resulting in `send()` call being entered from both
the LwM2M thread and the retransmit work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added initialization of ids fields in the log message in
z_log_msg_std_alloc(). If user space is enabled then msg_free()
function is reading log level and previously it may have been
uninitialized.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Allow feed operations that would stall due to internal peripheral
delays to complete immediately with -EAGAIN indicating that the feed
did not occur as expected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Create syscalls to make possible using random APIs from user mode
threads. These APIs can have different implementations, like using
entropy driver or Xoroshiro128. Some of these implementations also have
some globals to preserve state between calls.
Make it run entire in user space would require user adding these globals
to their memeory domains and/or grant access to entropy device. Syscalls
simplify its usage.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Include the files that provide the types and macros used by the
header. Ensure that all declarations use C language linkage when
included from a file using C++.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C99 designated array initializers are not part of the C++ language,
and are not supported in GNU G++. Replace their use with invocations
of the Zephyr listify macro utility, with ancillary helper functions.
Also fix the initialization order to match declaration order (which
C++ also requires).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C++ requires that designated initializers be provided in declaration
order. Fix the macros that violate this requirement.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The PCI API was originally limited to 32 bit addresses. Even though
it had code to skip over the high word in 64 bit BAR entries, it
refused to use it and returned a 32 bit value. Some devices in the
wild have default mappings from the firmware for devices above 4G.
Also remove the "iobar" API. It's dead code, we don't call it and we
don't test it. IO space BAR entries are a legacy feature from way,
way back in PCI history (I genuinely have never heard of a real device
that uses them!). And there's no difference in format between one of
these and a 32 bit "memory" BAR anyway, someone who actually had this
requirement could just use the existing API without worry.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The mm_reg_t type used to represent a MMIO address (e.g. in the
sys_write*() APIs) was defined to a uint32_t, which is obviously wrong
on 64 bit systems where devices can be mapped anywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Recent changes to struct _timeout changed the declaration order to
avoid alignment padding. While this has no effect to C99 code C++
requires that designated initializes appear in declaration order.
Update the initializer macro so it can be used in C++ code.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a simple test for this command to check that the output is as
expected.
This requires a larger output buffer in shell_dummy, so update that
too.
Signed-off-by: Simon Glass <sjg@chromium.org>
There is following error when compiling applications using http_client:
/zephyr/include/net/http_client.h:157:24: error: field 'work' has \
incomplete type
157 | struct k_delayed_work work;
| ^~~~
/zephyr/include/net/http_client.h:177:2: error: unknown type name \
'k_timeout_t'
177 | k_timeout_t timeout;
| ^~~~~~~~~~~
Fix that by adding missing kernel.h include statement in http_client.h.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is already a variable 'network_protos_up', which stores number of
network protocols being up. Additionally each network protocol has its
own state represented by is_ip{,v6}cp_up. Use the latter in FSM up() and
down() callbacks.
This fixes a case when both IPCP and IPv6CP protocols are going
down. When using ctx->is_network_up only one of them (the first) was
deinitialized correctly, second stayed always up (at least partially,
e.g. not calling ppp_network_down()).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix host RX thread being deadlocked. The deadlock occurs because the
RX thread is stuck waiting in conn_tx_alloc with K_FOREVER but if the
connection is disconnected only the RX thread can unblock it in the
handling of the disconnect event.
This commit fixes this deadlock by splitting the processing of the
disconnected event into two parts.
The part needed to unblock the RX is to release resources held by
unack'ed TX packets and mark the connection state as not connected
anymore.
The RX thread waiting for free_tx fifo and the TX thread waiting for
the bt_dev.le.pkts semaphore will both check the connected state after
having acquired them and will abort if disconnected.
The rest of the processing will be handled at normal RX thread
priority like normal.
Move the bt_recv_prio handling to the Bluetooth host when the host
has defined its own RX thread (CONFIG_BT_RECV_IS_RX_THREAD=n).
If the HCI driver has the RX thread (CONFIG_BT_RECV_IS_RX_THREAD=y),
then the responsibility to call bt_recv and bt_recv_prio correctly
falls to the HCI driver.
The helper function bt_hci_evt_is_prio() is replaced with
bt_hci_evt_get_flags() so that the HCI driver can do this correctly.
This decision to replace was made so that existing HCI drivers
maintained out-of-tree will fail at compile time with the new system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bluetooth: host: Move bt_recv_prio to host when RX thread is defined
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is necessary to avoid collision between drivers that calls
NET_BUF_POOL_DEFINE with the same name.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
It fixes #issues/26220.
openthread_start function is called when L2 enable(iface, true) is
called. openthread_stop is called when L2 enable(iface, false) is
called. openthread_stop makes the device to leave the OpenThread
network.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Add device tree bindings for the Semtech SX1261 and SX1262
radios. These will be used by Zephyr's LoRa drivers.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add an additional option to the spi_cs_control struct that records how
the pin has been configured in devicetree. For drivers that are not
updated, the CS behaviour is the same as before (Push-Pull).
Use the devicetree knowledge with the GPIO subsystem so that the correct
physical pin levels for the CS pin are automatically selected.
Fixes#26267
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use '0xa0' as default priority to be consistent with the V1/V2 and
V3 drivers default priority init.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Add api to raise SGI to target cores in affinity level identified
by MPIDR. Currently only EL1S is supported.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
The functions k_work_poll_submit_to_queue(), k_work_poll_submit() and
k_poll() described the parameter events as an "array of pointers to
events" which is not accurate. Replaced the description with "array of
events".
This fixes#23775
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Assignement in Z_TIMEOUT_TICKS macro causes narrowing
conversion warning in Z_TIMEOUT_TICKS.
Explicit cast to type of ticks field makes compiler happy.
Fixes#26369
Signed-off-by: Artur Lipowski <Artur.Lipowski@hidglobal.com>
This enables the ACPI_EC1 interface which is typically accessed
through ports 0x6A0 and 0x6A4 in Bios.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
For iterable areas defined with Z_STRUCT_SECTION_ITERABLE(),
the corresponding output section in the linker script is just
boilerplate. Add macros to make these definitions simpler.
Unfortunately, we have a fair number of iterable sections not
defined with Z_STRUCT_SECTION_ITERABLE(), this patch does not
address this.
The output sections are all named <struct name>_area, update
sanitylib.py with this.
sys_sem with no userspace, and k_lifo/k_fifo are special cases
where different data types that are all equivalent need to be
put in the same iterable area. Add
Z_STRUCT_SECTION_ITERABLE_ALTERNATE() for this special case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently this is useful only for some internal applications that
iterate over the device table, since applications can't get access to
a device that isn't ready, and devices can't be made unready. So it's
introduced as internal API that may be exposed as device_ready() when
those conditions change.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several shell modules use cloned code to iterate over all devices and
identify the nth instance that meets some criteria. The code was
repetitive and included various errors. Abstract to a helper function
that performs the check consistently.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The existing minimal ACPI implementation was enough to find the MADT
table for dumping CPU info. Enhance it with a slightly less minimal
implementation that can fetch any table, supports the ACPI 2.0 XSDT
directory (technically required on 64 bit systems so tables can live
>4G) and provides definitions for the MCFG table with the PCI
configuration pointers.
Note that there is no use case right now for high performance table
searching, so the "init" step has been removed and tables are probed
independently from scratch for each one requested (there are only
two).
Note also that the memory to which these tables point is not
understood by the Zephyr MMU configuration, so in long mode all ACPI
calls have to be done very early, before z_x86_paging_init() (or on a
build with the MMU initialization disabled).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for a C11-style aligned_alloc() in the heap
implementation. This is properly optimized, in the sense that unused
prefix/suffix data around the chosen allocation is returned to the
heap and made available for general allocation.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Macro GET_ARG_N is geting nth argument from the variable list provided.
GET_ARGS_LESS_N returns argument list without n first arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Pointer to flash_parameters have been added to nvs_fs structure and it
is no longer needed to store write_block_size within the nvs_fs.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
With addition of flash_parameters structure, and supporting API call
to retrieve it, it is no longer needed to store write_block_size as
a part of flash_driver_api and it should be part of flash_parameters.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds flash_get_parameters call to API that returns pointer to structure
describing flash parameters.
Currently only erase_value parameter is provided via the structure.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This header provides one public API function, but lacked the
annotations necessary to process it when generating documentation.
Also detailed documentation was provided in Z_INIT_ENTRY_DEFINE which
is an internal function excluded from documentation.
Add the necessary directives to include SYS_INIT() in generated
documentation and move the description of the level and prio
properties to it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
PCIe End Point can get three different reset interrupts from the
Root Complex, Function Level Reset (FLR), PCI Express Reset (PERST)
and Inband PCI Express Reset (INB PERST).
Add public API to let PCIe EP drivers register callback function
for each PCIe reset interrupt. This callback function should be
executed from corresponding reset interrupt handler if registered.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
It may be useful for the application to register its own callback for
ot state changed event which does not override the current one.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
It may be useful to start openthread manually but with default
network settings. For instance when the application wants to register
ot state changed callback which should be done before openthread
starts.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This struct is taking up most of the heap's constant footprint overhead.
We can easily get rid of the list_size member as it is mostly used to
determine if the list is empty, and that can be determined through
other means.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We already have chunk #0 containing our struct z_heap and marked as
used. We can add a partial chunk at the very end that is also marked
as used. By doing so there is no longer a need for checking heap
boundaries at run time when merging/splitting chunks meaning fewer
conditionals in the code's hot path.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The library supports the declaration of JSON arrays as both nested and
top-level elements. However, as the provided encoding functions
json_obj_encode() and json_obj_encode_buf() interpret all input
structures as objects, top-level arrays are encoded as
{"<field_name>":[{...},...,{...}]}
instead of
[{...},...,{...}].
Add new functions json_arr_encode() and json_arr_encode_buf() that
enable top-level JSON array encoding.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Add options for phy update procedure. User can now set no preference
option for a particular PHY as well as preference for LE Coded PHY
coding scheme.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since this is an experimental API and MACRO_MAP() was deprecated in
favor of FOR_EACH() in zephyr v2.3.0, we are within our rights to just
remove it without notice now. Do so and mention it in the release
notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move the repetitive definitions used to add and subtract 1 at
preprocessor time into their own file. Make the behavior consistent,
so that you can invoke UTIL_INC(x) for any x you can invoke
UTIL_DEC(x) on.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Previously, DTS specification of physical RAM bounds did not
correspond to the actual bounds of system RAM as the first
megabyte was being skipped.
There were reasons for this - the first 1MB on PC-like systems
is a no-man's-land of reserved memory regions, but we need DTS
to accurately capture physical memory bounds.
Instead, we introduce a config option which can apply an offset
to the beginning of physical memory, and apply this to the "RAM"
region defined in the linker scripts.
This also fixes a problem where an extra megabyte was being
added to the size of system RAM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There were two spots where CONFIG_TIMEOUT_64BIT wasn't being correctly
honored, leading to the possibility of long timeouts overflowing
internally and doing weird stuff.
Fixes#26248
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Try to define MAX_FILE_NAME to the appropriate max length based on the
selected filesystm. Otherwise fallback to a standard filename of 12
(made up of 8.3 : <filename>.<extension>)
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
Since CONFIG_NET_BUF_USER_DATA_SIZE was not defined when
CONFIG_NET_BUF=n, compilation would fail on struct net_buf.user_data.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
When compiling network subsystem, I was getting the following compiler
warning:
```
In file included from /home/markus/src/wrp-n4m/zephyr/include/net/net_if.h:29,
from /home/markus/src/wrp-n4m/app/src/main/node/main.cpp:20:
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:80:32: warning: unnecessary parentheses in declaration of '__net_l2_OPENTHREAD' [-Wparentheses]
80 | #define NET_L2_GET_NAME(_name) (__net_l2_##_name)
| ^
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:82:29: note: in
expansion of macro 'NET_L2_GET_NAME'
82 | extern const struct net_l2 NET_L2_GET_NAME(_name)
| ^~~~~~~~~~~~~~~
/home/markus/src/wrp-n4m/zephyr/include/net/net_l2.h:114:1: note: in
expansion of macro 'NET_L2_DECLARE_PUBLIC'
114 | NET_L2_DECLARE_PUBLIC(OPENTHREAD_L2);
| ^~~~~~~~~~~~~~~~~~~~~
```
This patch fixes the warning.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updated rx_disable() description so that RX_RDY event is generated
after calling rx_disable. It contains data received prior to abort.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Support PLL for Higher Frequencies 80,160,240 MHz
- Support XTAL Frequencies 26MHz, 40MHz
- Clock Driver can't be disabled, because all of the other drivers
will depend on it to get their operating Frequency based on chosen
clock source (XTAL/PLL).
- Add needed references to BBPLL i2c bus ROM functions.
- Add `rtc` node to Device Tree.
- Since All Peripherals Frequency is depending on CPU_CLK Source,
`clock-source` property added to CPU node
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
If CONFIG_THREAD_NAME is enabled, we must use log_strdup() when
printing the thread name.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to follow threads by name in the debug output,
output a thread name if CONFIG_THREAD_NAME is enabled.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Clarify that number of bytes_written means bytes number of bytes
written belongs to the user's payload.
Added API note for emphasize that any flush write should be
the last write operation in any writes row.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
