This adds NET_REQUEST_BT_ADVERTISE which can be used to advertise
IPSS service so the remote devices can connect to it.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit adds new sensor channel macro SENSOR_CHAN_BLUE which can
be used for RGB sensors to get illuminance in Blue spectrum.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a simpler memory arrangement; RAM will start with
app data, and everything after it is either kernel data or
unclaimed memory reserved for the kernel's use.
New linker variables are also implemented here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These can be computed from start/end values, but such
arithmetic can't be done when populating at build time
struct member values.
Some documentation has been added to explain exactly
what these symbols mean. It is intended for application
RAM to come first, then followed by kernel RAM and then
all unclaimed memory (also considered kernel RAM).
Obsolete _image_ram_all[] removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel data size shifts in between linker passes due to the addition
of the page tables. We would like application memory bounds to
remain fixed so that we can program the MMU permissions for it
at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was not working properly but only noticeable if the
sections involved were not preceded by a KERNEL_INPUT_SECTION
definition for the same sections (i.e. the application data
coming first in the memory map)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page faults will additionally dump out some interesting
page directory and page table flags for the faulting
memory address.
Intended to help determine whether the page tables have been
configured incorrectly as we enable memory protection features.
This only happens if CONFIG_EXCEPTION_DEBUG is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Includes updates to Zephyr networking API feature list (also minor
tweaks to it not dorectly related to sockets), overview of BSD
Sockets compatible API, and basic API reference section.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add API that allows net-shell to get net_app context information
that can be used to debug net_app connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
mqtt_init's return value in the generated docs didn't format
correctly. Needs to be a space after the 0, so just delete
the comma.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some of the networking header files in include/net/ directory were
missing @defgroup doxygen directives.
There was also duplicate @defgroup directives which are now changed
to @addtogroup directives.
Added also missing API links to doc/api/networking.rst file.
Added exceptions to .known-issues/doc/networking.conf file so that
doxygen does not complain.
Jira: ZEP-2308
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
STM32 pin configuration comments where offset by 4 bits.
Fix this issue and make pin configuration settings
easier to read.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If peer has previously configure to received service changes indications
any changes to the database during the time it has been disconnected
shall be indicated once it reconnects:
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] sc_save: (0x004065b4) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] bt_gatt_connected: (0x00405240) conn 0x00405aa0
[bt] [DBG] gatt_ccc_changed: (0x00405240) ccc 0x00400b30 value 0x0002
[bt] [DBG] sc_ccc_cfg_changed: (0x00405240) value 0x0002
[bt] [DBG] sc_restore: (0x00405240) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] gatt_indicate: (0x004065b4) conn 0x00405aa0 handle 0x0008
[bt] [DBG] sc_indicate_rsp: (0x00405240) err 0x00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit adds http_client_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_server_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Normally network interface is always UP, but Bluetooth
interfaces are down until connected. So if this is the case,
then check the interface status before trying to access variables
that are NULL. This was seen with "net iface" shell command when
BT was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add needed uart pinctrl configuration in pinmux node.
This is done thanks to <soc>-pinctrl.dtsi file matching
the <soc>.dtsi files
Populate stm32 f4 based boards dts files with references
to uart pinctrl nodes.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add pinmux yaml file and bindings before introduction
of pinmux node in stm32 soc device tree files
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Fix the indentation which was caused by uint32_t -> u8_t changes.
* Make sure there is no unused variable warning if debugging is
enabled but debug level is low.
* Add assert that checks that Imax_abs is > 0 which it should be.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Subsequent patches will set this guard page as unmapped,
triggering a page fault on access. If this is due to
stack overflow, a double fault will be triggered,
which we are now capable of handling with a switch to
a know good stack.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Each member of the array may need to have a padding size added
such that the base address of each array element corresponds to
the desired stack alignment.
This would mean that sizeof(some array element) would return
a larger size than what was originally provided.
This won't cause problems at runtime since the space is really
there, but for users who are only enabling this padding for
debug features, they may be surprised when their stacks are
effectively smaller than when this was enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now create a special IA hardware task for handling
double faults. This has a known good stack so that if
the kernel tries to push stack data onto an unmapped page,
we don't triple-fault and reset the system.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We will need this for stack memory protection scenarios
where a writable GDT with Task State Segment descriptors
will be used. The addresses of the TSS segments cannot be
put in the GDT via preprocessor magic due to architecture
requirments that the address be split up into different
fields in the segment descriptor.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This has one use-case: configuring the double-fault #DF
exception handler to do an IA task switch to a special
IA task with a known good stack, such that we can dump
diagnostic information and then panic.
Will be used for stack overflow detection in kernel mode,
as otherwise the CPU will triple-fault and reset.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add "clocks" property on u(s)arts nodes on stm32 socs
Add a dt clocks binding file and rework clock_control
header file include new device tree binding file.
include/dt-bindings folder is introduced as dt-bindings
placeholder
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A user space buffer must be validated before required operation
can proceed. This API will check the current MMU
configuration to determine if the buffer held by the user is valid.
Jira: ZEP-2326
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
K_POLL_MODE_INFORM_ONLY was renamed to K_POLL_MODE_NOTIFY_ONLY, but
stale use was in a docstring.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
poll() allows to (efficiently) wait for available data on sockets,
and is essential operation for working with non-blocking sockets.
This is initial, very basic implementation, effectively supporting
just POLLIN operation. (POLLOUT implementation is dummy - it's
assumed that socket is always writable, as there's currently no
reasonable way to test that.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This needs to be in <arch/cpu.h> so that it can be called
from the k_panic()/k_oops() macros in kernel.h.
Fixes build errors on these arches when using k_panic() or
k_oops().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Document clearly how and in what context, the various callbacks
in net_context API are being called.
Jira: ZEP-2352
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
_FILE_PATH_HASH appears to be a legacy Diab-ism that doesn't
expand to anything in GCC.
As a result, when linking the combined binary, it's quite
possible that objects in separate C files would be merged
instead of truly being in their own section. This can confound
--gc-sections and result in unused objects still being in
the final binary if one of the other objects with the same
generated section name was actually used.
We instead just use __FILE__. This results in sometimes absurdly-
long section names in the intermediate .o files, but there is no
actual limit to how long section names in ELF binaries can be;
they are not stored directly in headers but instead referenced
as an offset in the .shstrtab section, which has all the section
names stored in it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Different areas of memory will need to have different access
policies programmed into the MMU. We introduce MMU page alignment
to the following areas:
- The boundaries of the image "ROM" area
- The beginning of RAM representing kernel datas/bss/nonit
- The beginning of RAM representing app datas/bss/noinit
Some old alignment directives that are no longer necessary have
been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1) start/end addresses for rodata
2) size of image ROM area
3) size of RAM (not including rodata/text) up to the limit of
physical memory
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
These special kernel sections represent arrays of kernel objects than
are iterated over at runtime to perform initialization.
The code expects all the data in these sections to be in the form of an
array of that section type, with each element sizeof(type) bytes apart.
Unfortunately, the linker sometimes has other plans and in some cases
was defaulting to aligning the data to some large power-of-two value,
such as 64 bytes. This causes any attempt to iterate over these sections
to fail as they are not a proper array.
Use the ld SUBALIGN() directive to force the alignment of these input
sections to 4 bytes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch splits out the application data and bss from the
rest of the kernel. Choosing CONFIG_APPLICATION_MEMORY will
result in the application and kernel being split.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The I2C Slave Read support isn't well defined and not actually supported
by any i2c driver at this point. We can add this back when slave mode
is more thought out.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print errors if assinging null values into net_buf
pools as this is a normal condition if those pools are not used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI Read Remote Version Information Complete event structure was
incorrect, leading to qualification test failures. This patch fixes the
structure and also the storing of the data in an endianness-agnostic
manner.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Correctly filter out the Authenticated Payload Timeout Expired event
based on the bit present on page 2 of the Event Mask.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to filter events present in Page 2 of the Event
Mask, this command allows the Host to set the Page 2 of the bitmask
through the corresponding command.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a SPI master and slave driver for the L4, F4 and F3 STM32
SoCs families.
Change-Id: I1faf5c97f992c91eba852fd126e7d3b83158993d
Origin: Original
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Some drivers would need some specific configuration flags,
re-introduce a vendor specific field for this purpose.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some cases applications may want better control of advertising
instead of the stack doing automated re-enablement. Introduce a new
option that can be used to do more "manual" advertising control.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implements CONFIG_APPLICATION_MEMORY for x86. Working in
XIP and non-XIP configurations.
This patch does *not* implement any alignment constraints
imposed by the x86 MMU, such enabling will be done later.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Applications will have their own BSS and data sections which
will need to be additionally copied.
This covers the common C implementation of these functions.
Arches which implement their own optimized versions will need
to be updated.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is conditionally defined based on whether we are splitting
the application from the kernel, and is used for specifying
kernel input sections based on input files.
The kernel output sections will get matching input sections only
in libzephyr.a and kernel/lib.a.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As explained in the docstrings, a usecase behind these operations is
when other container objects are put in a fifo. The typical
processing iteration make take just some data from a container at
the head of fifo, with the container still being kept at the fifo,
unless it becomes empty, and only then it's removed. Similarly with
adding more data - first step may be to try to add more data to a
container at the tail of fifo, and only if it's full, add another
container to a fifo.
The specific usecase these operations are added for is network
subsystem processing, where net_buf's and net_pkt's are added
to fifo.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
By moving user_data member at the beginning of structure. With
refcount at the beginning, reliable passsing of contexts via
FIFO was just impossible. (Queuing contexts to a FIFO is required
for BSD Sockets API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two changes are required so far:
* There's unavoidable need to have a per-socket queue of packets
(for data sockets) or pending connections (for listening sockets).
These queues share the same space (as a C union).
* There's a need to track "EOF" status of connection, synchronized
with a queue of pending packets (i.e. EOF status should be processed
only when all pending packets are processed). A natural place to
store it per-packet then, and we had a "sent" bit which was used
only for outgoing packets, recast it as "eof" for incoming socket
packets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
patch adds necessary files and does the modification to the existing
files to add device support for x86 based intel quark microcontroller
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
During the conversion of uint16_t to u16_t the value field of these
structs was not aligned properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_gatt_unregister_service to bt_gatt_service_unregister to be
consistent with other APIs such as bt_gatt_service_register.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The porting of the TI CC2650 SoC introduces the need to
write a specific configuration area (CCFG) at the end of the
flash. It is read by the bootloader ROM of the SoC.
For now, this is a quick hack and not a generic solution;
similar needs may arise with other hardware.
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@smile.fr>
Clearing fields in the region descriptor attributes doesn't always have
the expected effect of revoking permissions. In the case of bus master
supervisor mode fields (MxSM), setting to zero actually enables read,
write, and execute access.
When we reworked handling of region descriptor 0, we inadvertently
enabled execution from RAM by clearing the MxSM fields and enabling the
descriptor. This caused samples/mpu_test run to throw a usage fault
instead of an MPU-triggered bus fault.
Fix this by setting all the MxSM fields to 2'b11, which gives supervisor
mode the same access as user mode.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We need to make sure that __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS
are set to the same value. Add a simple build time check to ensure
this is the case. This is to catch future cases of issues like
ZEP-2243. This is a stop gap til we resolve ZEP-2262, which covers use
of both __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Misspelled @brief and a couple names were different than
what was in the doxygen comments (generated warnings)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With the introduction of Service Changed support it is now possible to
unregister services at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GATT is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
