This commit provides support for disco_l475_iot1 board
Pinmux driver is provided with initial support definitions
Change-Id: I17b637a8ba0b033014969eca8fffe76319c47c52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to allow the use of such board, a very preliminar port was
developed. It consists of board files, as well as pinmux, uart, gpio,
spi drivers and device tree files.
Change-Id: I5753064e39e0b023cf4481744c176de26d8dbebb
Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add initial .shippable.yml for CI integration on github and related
scripts.
Change-Id: I095d125e780bba980e635e218205c8741e753a8e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently running "make V=1 flash/debug" does not result in the caller
discovering what commands are run to perform the action because make
calls into an opaque script (which then makes complex invokations of
both openocd and gdb). Make the script more transparent by conditionally
enabling enabling tracing within the script.
We also remove the "Done flashing" message. It is pointless because
openocd has already *told* us it has done flashing ["wrote 16384 bytes
from file .../zephyr.elf in 0.802135s (19.947 KiB/s)"]. It is also
potentially misleading since it tells us we are "Done flashing" even
when we failed to flash anything which risks misleading someone
unfamiliar with openocd.
Change-Id: Icaea28c4b00ac10965726dd4502162b7de080953
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Generate a test report using junit/xunit format with all details and
logs that can be published on the web to show results from a sanitycheck
run.
Output is stored in scripts/sanity_chk/ alongside the CSV file.
Change-Id: I5ea6f409c1f86f408eeae870b90a953e71046da9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Install gitlint using pip:
# pip install gitlint
# gitlint install-hook
This will install the pre-commit hook.
Policies are define in .gitlint. Custom rules are available under
scripts/gitlint.
This script will also run in CI, so avoid CI errors by using the hook
above.
Change-Id: I62750a1fd9369341db29c413a6c4a1677bb0db8a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To speed up builds, this change allows building the needed host tools
that are built for every application and stores them un
${ZEPHYR_BASE}/bin.
Run 'make host-tools' and then define PREBUILT_HOST_TOOLS to reuse the
host tools across multiple builds.
$ make host-tools
HOSTCC scripts/basic/fixdep
HOSTCC scripts/gen_idt/version.o
HOSTCC scripts/gen_idt/gen_idt.o
HOSTLD scripts/gen_idt/gen_idt
HOSTCC scripts/gen_offset_header/gen_offset_header.o
HOSTLD scripts/gen_offset_header/gen_offset_header
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
$ export PREBUILT_HOST_TOOLS=${ZEPHYR_BASE}/bin
$ make -C samples/hello_world
Now you will notice a speedup when building the application!
Change-Id: Ie0aeee7f9a60b1fd49e7e32d78601f03473d73b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only in rare cases should we allow C99 types, so lets warn about it to
catch issues.
Change-Id: I2bacdd4ba98f88482e0b7acc0567ff1139e749bf
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Hex mumeric values directly in the expression were cast correctly
via the t_HEX rule, but ValueErrors would occur if a hex value was
looked up due to the expansion of some environment symbol.
Change-Id: Ia98dfea91eff4ed95778922d38d2967284f4e31b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Yes, revert the revert, was a little too quick to apply this. The fix
is to cleanup the dtsi file in question.
This reverts commit 6702686976.
Change-Id: I933fad9d96ec6375eda33f0b012349f1c39e261f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* CONFIG_SOC is now properly set and we do not need a separate
XTENSA_CORE build variable
* Some unnecessary macro -D CFLAGS in the Xtensa Makefile removed
* There is no default SOC selection, it is now done explicitly in
the board's defconfig
* CONFIG_<board name> now renamed to CONFIG_SOC_<board name in
uppercase> to conform to established style.
Issue: ZEP-1711
Change-Id: I88997530db09970b7fdd1c3e3d355bfca9d0be1a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 1c06065941.
Breaks cc3200_launchxl really bad:
CC drivers/serial/uart_cc32xx.o
/projects/zephyr4/drivers/serial/uart_cc32xx.c:39:18: error: ‘TI_CC32XX_UART_4000C000_BASE_ADDRESS’ undeclared here (not in a function)
.base = (void *)TI_CC32XX_UART_4000C000_BASE_ADDRESS,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/projects/zephyr4/drivers/serial/uart_cc32xx.c: In function ‘uart_cc32xx_init’:
/projects/zephyr4/drivers/serial/uart_cc32xx.c:65:5: error: ‘TI_CC32XX_UART_4000C000_BAUD_RATE’ undeclared (first use in this function)
TI_CC32XX_UART_4000C000_BAUD_RATE,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: If46c239bc8d6b4296494f638e900f6044a92ce26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes an issue with mixed case node names. Node names
containing upper case letters were causing key match errors during
post processing. This patch maintains the case of the node names.
Change-Id: I153a186fa09dcf958c9de55b578dbc63e615a076
Signed-off-by: Andy Gross <andy.gross@linaro.org>
A patch moved the specification of debug flags to a
KBUILD_CFLAGS_OPTIMIZE, but this Makefile wasn't updated.
Change-Id: Ic0d23f95609798473298cda4c044981edabb3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is intended as a temporary fix for ZEP-1882.
Investigation for this bug has shown that the current SDK 0.9 compiler
for ARC generates incorrect code under -Os optimization level.
Kuo-Lang Tseng found out that SDK 0.8.2 does not have this issue, and
that lowering optimization level to -O2 fixes the issue with SDK 0.9.
Juro Bystricky is working on an updated SDK with ARC GCC 6.3.0, but
there are still problems with it, so he also suggested to use -O2 in
the meantime.
Instead of blindly setting -O2 for all toolchains and architectures,
let Makefile.toolchain.zephyr make the decision for ARC and 0.9 only.
Tested with hello_world, CONFIG_ADC=y and BOARD=arduino_101_sss.
Jira: ZEP-1882
Change-Id: Ifde2e3950c9d93eed8982149805acfda9d13a94f
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Initial assumption with Arduino 101 was that the "alternate setting
name of the DFU interface" would be simple enough to be used as the
grep pattern when attempting to find the board in DFU mode.
However, for boards such as the 96Boards Carbon, this name includes
grep meta-characters, so the DFUUTIL_ALT environment variable is
provided as a numeric value, instead of the previously expected name
string.
In order to avoid false positives, we now check whether DFUUTIL_ALT
is a numeric value, and the grep pattern is adjusted accordingly to
search for either "alt=" or "name=".
Also take into account that the name might contain spaces.
Change-Id: I81351d03bd727b35093fd1280e2b8b6904f3c89b
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
This patch adds DTS application overlay support. Applications
requiring specific device features can specify these using
board dtsi files located in the application directory. These overlay
files are board specific.
Issue: ZEP-1745
Change-Id: I1c5f1a8a198fe543b6d52ee8c1fb31a2038a7956
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Introduce a system include so that board dts files are able to live in
any location and properly include the things they need.
Change-Id: Icd26433117a4ca9726aeb74eec9f72c6d9df617c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
We were missing the cell name in how we create the IRQ define. This was
working fine because the only name we had been using with IRQ which we
would shorten down.
Change-Id: I8449c8ced1a9284982d3d5b07c6acdcf26e965e2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add DFUUTIL_DFUSE_ADDR to the list of dfu-util environment variables,
which can be used to flash DfuSe devices (e.g. STM32 based MCUs).
Change-Id: I39fdc338f7f034376ce50b648b06f39fee3169a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Tested on nrf52_pca10040 and nrf51_pca10028 using hello_world sample.
Change-Id: I7cdf1d21e7f8232da737a06e5afbfb1eaec05cde
Signed-off-by: Michał Kruszewski <mkru1992@gmail.com>
At present 'make flash' target for boards that support flashing with
OpenOCD works only with Zephyr SDK. This patch enables flashing
without Zephyr SDK as long as openocd itself is installed.
Change-Id: I4594d795225e54b7638839d590e4c0620f9ca88c
Jira: ZEP-1893
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Only the IRQ prasing was using cell_prefix and cell_string does the same
thing so lets just use that everywhere.
Change-Id: I2ef9b1e2c1baef54b71d811c835b29a9ca8fe81b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Flashing the Arduino 101 board over DFU can be tricky: the
dfu-util command line is cumbersome, and the reset button
must be pressed at the right time.
This script brings the convenience of 'make flash' for the
Arduino 101 board and for other boards that support the DFU
protocol. It checks whether the board is in DFU mode, and
prompts the user to reset it when needed.
The dfu-util command line is constructed from the following
environment variables, to be exported from the Makefile:
- DFUUTIL: path to the dfu-util executable, default: dfu-util
- DFUUTIL_PID: vendor_ID:product_ID of the board in DFU mode
- DFUUTIL_ALT: alternate setting name of the DFU interface
- DFUUTIL_IMG: path to the binary image sent to the board
Change-Id: Ia9577ec96102a92d4c60481f980f30f4f6e7cd9e
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a corner case that barely hits and thus we had not seen it
before.
Change-Id: Ie1420a4c866834e5a233985c6b8a19643426a1f5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Adjust the checkpatch script to recognize the volatile keyword as
forming part of a declaration. This prevents inappropriate checkpatch
gripes for patches such as:
https://gerrit.zephyrproject.org/r/#/c/10345/
Change-Id: Ia29a9002bb9ef15f747d29231d938ae12790724d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
We default DTC to /usr/bin/dtc so we can build targets that are using
devicetree and not using the zephyr SDK (which provides a version of
dtc).
Change-Id: I84c3e3181eda75b4da715e16bbde2e67f28785e7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the hardwired #! python path with a PATH search. This is
necessary to allow build tools to execute from a virtualenv.
Change-Id: Ib83131fd96656bc9f76c606356b1f92c877cc117
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
By convention Kconfigs are in all uppercase, but not strictly
required to be so. Currently the Xtensa build defines
CONFIG_${XTENSA_CORE} which can have lowercase letters. This
is marked for cleanup in ZEP-1711.
Issue: ZEP-1711
Change-Id: Ia901ea1688202129f1629001a77f498522859f14
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This toolchain Makefile defines CC/CXX directly so we need to add
a USE_CCACHE case here.
Change-Id: Iee8dc6ab030db8dc45b16e21c5b17864e51341b4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A ctrl-c in the script wouldn't terminate the child process.
Only do the pid trick if we're communicating with sanitycheck over
pipes.
Change-Id: I79da7362958b5fac00defd74d4b709076085575b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Manu command lin eoption are not supported by xt-c++. There are filtered out
when calling Makefile.toolchain.xcc.
Change-Id: I1e60843d2b23f90250fbb493487c6fc838b7485a
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
If passed after the file they are just ignored silently!
Change-Id: Ic9b04c3023e4d312382850fa5e1b5ae4ef555856
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
When current directory is a symbolic link or in a symbolic link then os.getcwd
return the real path leading to os.path.relpath returning not so nice relative
path.
Change-Id: I3e24d3e6f1fe7185992f64803d3728e9588d67e1
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Sanitycheck actually creates the pipes, using a naming convention imposed
by QEMU. We also need to leave a PID file.
'xt-run' Make target removed, we don't need it.
Change-Id: Ie9fd9dbb1327eb4b10424e7ee5d2f4dc09b121a4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows handling options like --fatal-warnings that are passed by
sanitycheck.
Change-Id: Ia78dcef480d9d81cab6051453204c05d52917af2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This completely breaks all the cc-option checks. It's not clear
why this was done for everyone running sanitycheck.
Change-Id: I3f944423869ccb15fab29c28130820a93cd94917
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In scripts/Makefile.qemu, the target qemu is already an alias for taget run.
In scripts/Makefile.xt{,sc}-run there is no target qemu but a target run.
Change-Id: Ib9dce3561ef9367b17d30070354e709df4d7e528
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
XCC does not recognize __builtin_unreachable() and thus cause a link error.
Change-Id: I5dadf5a49d971d5e0a5ef88d582bb5ad2c36bced
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
These libraries are unlikely to be uesd by GCC port and thus should not be in
a generic make file. Moved to specific toolchain make file.
Change-Id: Ib585b87700e409d678f7a5cb60cff67b6022ab05
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use this configuration file with the uncrustify tool to fix style
issues. the configuration should apply the zephyr coding style on
source code files with a few minor excrption. Do not take the output for
granted, always check for correctness after running.
To use, for example:
uncrustify --replace --no-backup -l C -c $ZEPHYR_BASE/scripts/uncrustify.conf
This will do the changes inline.
Change-Id: Iecfd2e10bc7e475ca83de0d921ebb5d72156d286
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many users set USE_CCACHE=1 in their envionment. Sanitycheck was
disregarding that and placing USE_CCACHE=0 in the generated
Makefile unless --ccache was added to the command line every time
it was invoked.
Issue: ZEP-1663
Change-Id: Id3c1379f5039d4d2f4a3ae01d2ec8d0dd216f523
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As decided during the Zephyr Mini Summit in December 2016, we're going
to use the same Device Tree format as used by the Linux kernel to store
device configuration from vendors.
This is a parser written during the summit that will parse *.dts files,
and will be used as part of the solution to read in the files provided
by manufacturers and generate board configuration files.
The script will also optionally generate files in the DOT language so
that DTS files can be graphed using the Graphviz suite.
Change-Id: I6e2b7a64a6dcc349b2888332a660b4700af6cd63
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 9fb0c2af5c.
SDK 0.9 has now been released.
Change-Id: I676b6f0e31ab48fde3dda41b681abf53964ea9f9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 0.9 SDK is not released yet!!
This reverts commit 7995e6207c.
Change-Id: I550d1aa27ba7a06ff2cda09496ceb92645a17460
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce support to tag some issues as warnings, that can be printed
but not considered errors.
Added the ability to write the errors and warnings to split files, for
later reporting.
Added a more consistent help.
Change-Id: Ia75430c3337385afca59595437168ab643c92911
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Values now spaced 4 apart since we commonly build thousands of
tests.
Percentage complete indicator added.
Change-Id: Ia7454dc1e8cc0701dc74dc8a4f6e7a37706524e8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were causing some issues in the old kernel, but the unified
kernel no longer uses these.
Issue: ZEP-513
Change-Id: I87216565231cd244886fbffe4b4d420d1687b245
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Compiling Zephyr with an external riscv32 toolchain would
require the following env variables to be exported:
export ZEPHYR_GCC_VARIANT=riscv32
export RISCV32_TOOLCHAIN_PATH=/PATH/TO/TOOLCHAIN/BINARY
Change-Id: I2072ed9079a4cabd27837ab39b947bc0a0a1a8b4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
At least one Linux distribution (Arch) has made python 3 the default
interpreter, and Debian and Ubuntu have expressed a desire to eventually
make this the case. As such, invoking 'python' or '/usr/bin/python'
will possibly run python 3 instead of version 2.
Distributions have included a 'python2' link for quite some time now,
and given that we have some scripts that require python 3, we should be
explicit about those that require python 2.
In addition, be more consistent about how python is invoked, preferring
the:
#!/usr/bin/env python2
construct rather than a hardcoded path to python. This allows the user
to have an alternative python in their path that will be used in
preference to the system provided version.
Jira: ZEP-1548
Change-Id: I125c2af808dc268f74277bc97a092df3acad23c0
Signed-off-by: David Brown <david.brown@linaro.org>
This had been erroneously reported as a build error.
Issue: ZEP-1460
Change-Id: Idddaf833011beb1165bd766dd115c021c5b90cdf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I813fabf1453f19ce7a83b28e4792b5c80616d936
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various changes required by new SDK 0.9:
1. Renamed toolchain vendor name ("poky" -> "zephyr")
2. Toolchains now 64 bit, previously 32 bit
3. New toolchain for Xtensa
4. New toolchain for RISC-V
0.8.2 is still supported.
Change-Id: Icfd4cc44ef643da0f3840b33d6dfc4b3c99dfa9a
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently CI plays tricks with `tee` to capture the output and post
process it. This makes it more complex to handle and easier for it to
fail in ways it should not.
So add a simple log capture option sanity check that mirrors the
stdout output, removing color encoding for errors.
Change-Id: I6de0b6cfe4da9c289f537979545dddbcd49cf834
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This reverts commit 4e2cf33d9d.
The change does not work correct if we have a filter and specify a
specific platform, such as:
./scripts/sanitycheck -p 96b_nitrogen -i -s samples/hello_world/test_singlethread
Change-Id: I43a4f25ed25c8fe5379cda23b6dbfa8f9ae5cb0d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When running a reduced set of tests with --platform-limit or using the
default of 1 we build the configuration (make initconfig) for all
platforms, although we are only interested in a limited set. On my
machine this is 100s of build time for configurations we are never going
to use.
This reduces the number of builds to what we really need and speeds up
sanitycheck runtime overall.
Might need a few more optimisations.
Change-Id: I53d6bacf66045dde7baabbaa40b4fbfc4a01782a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added sanity args to be used by the compare footprint.
Please notice that compare footprint use sanitycheck to
build footprint apps for base commit and for current commit.
This in order to collect the information and generate the diff.
Change-Id: I6f86bbfa020999b3f26e93a608fc7b34ee508e10
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch does not apply anymore. A patched qemu already exists in the
SDK.
Change-Id: Iee18550a7b9288a1db2a6ecc4378ff554b240229
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The macro defines the stack as usual, but if user has
enabled net shell (CONFIG_NET_SHELL), then additional
information about the stack is stored in net_shell
linker section. The information in the net_shell linker
section is then used to print information about the
stacks in the networking sub-system.
Change-Id: Ic6e9f16a73a192b9a59d32a6d0070322382f98bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to store the nbr pool data into a dedicated section
as we have only one nbr pool defined.
Change-Id: I6f2afcce57b5f588878496bf085567b938e32c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We missed that section, so sanitycheck was failing.
Also putting the right section in the relevant array.
Change-Id: I361ffa1707c01f0d3c870a7bc36a86ada66af1d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without these, test case will fail miserably.
Change-Id: Ib46d167b8782c33362ac6edb9d8c50abc25908c0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
getenv() returns an string of unknown size, so Coverity warns that it
might be used to overflow the stack in the call chain off
conf_read_simple().
To avoid that, wisdom says copy to an string of known size and pass
that.
Change-Id: I9e468de0ae66429062027f58fe0a0a4e1197218f
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
(cherry picked from commit 0307d6ea5f)
Added new option to make sanitycheck script error on deprecation
warnings, to use:
sanitycheck --error-on-deprecations
For example, to find usage of legacy APIs in master, run the following:
sanitycheck -e legacy --error-on-deprecations
Change-Id: Ib83c266c8357475840dea03d62ceefed72b73f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running --only-failed make sure last_sanity.csv exists.
Change-Id: I862529a58f337987c37da83fd5541dd4f42b3391
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In windows systems the rename() function fails if the new name
of the original file corresponds to a file that already exists.
The fix removes the new file before renaming the original one.
Jira: ZEP-980
Change-Id: Ib3a43db86c0dd3fabb592f53ea7619eb5738bb65
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Coverity reported 150819 issue, which steams off Flex generated code
from zconf.l in which sprintf() was use. Because of that, the
conf_read_simple() @name parameter could be used to overrun
zconf_open() @fullname by crafting SRCTREE and KCONFIG_ALLCONFIG
environment variables.
Change-Id: I2cff817dccafe0e06b35636bbb7be95e062410af
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Update file to catch any regressions and major changes during
stabilisation period.
Change-Id: Id30dd1827034b96c5478c78f9c388384f51bcbec
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Right now the build system builds the host tools over and over again, in some
environments especially when running in an IDE on windows for example,
this is not desired and a set of pre-built host tools should be used.
Provide an option to use pre-built tools instead of building them
from source.
To use, set PREBUILT_HOST_TOOLS to the path where all pre-built host tools
are hosted. To get a prebuilt version of the host tools, build without the
variable set and copy the generated host binaries from outdir. The following
tools are supported:
* conf
* fixdep
* gen_idt
* gen_offset_header
Jira: ZEP-237
Change-Id: Iea505bfd0b50f851ee2781b5117bb6085ab20157
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add board support for ARM V2M Beetle platform.
ARM V2M Beetle board is build around the ARM Beetle Cortex-M3
based processor.
The support has been tested in nanokernel mode with the bringup
application that will be pushed with a future patch.
Jira: ZEP-1245
Change-Id: Ib05a40c072f10149e692283177387cf2cfe32f66
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from
the Linux kernel.
Change-Id: Ie2cabbfea415d26ffacef340d9497342b496dc29
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 0c9152d42d.
This was not ready for merge yet.
Change-Id: I08f69e27929867606bc58cdeffed6540725069a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from the Linux
kernel.
Change-Id: I6314dd41eb200c87cdcc6f212f13d3351128de0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Similar to C subdir-ccflags, enable similar C++ variable subdir-cxxflags
Change-Id: I4355817bc2d6a80a3eebba9b87fbf54725dda5e7
Signed-off-by: Sakari Poussa <sakari.poussa@intel.com>
sysgen will also now re-run if the build system detects that
the script itself has changed.
Change-Id: I2bf5c4893da088fa27729bc6337bc66cc4cee341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added Kconfig and makefiles to be able to build a Zephyr application
on Linux/gcc, and load via OpenOCD.
Validated by running the hello world, and philosophers microkernel
samples, and stepping through the code in gdb.
Jira: ZEP-1109
Change-Id: If5d3e7b1a8ecf5ecf6a00f147742b3bc5716190f
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Sysgen was still generating the TICK_EVENT event needed for the
microkernel system clock timer driver in the unified kernel. That ended
up dragging in alerts all the time, which in turns drag in the system
work queue, which drags in the work queue, which drags in FIFOs.
This shaves 1052 bytes of RAM and 860 bytes of ROM in systems that don't
need these components (on x86 with IAMCU).
Change-Id: Ica56857da2b6444181f10e83f6c986d092aa967b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Now that these platforms pass sanitycheck add them into the list of
platforms we support
Change-Id: If559c80e107505e6b98f81c0e94b9862618b1735
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enhance the linker script so that all statically-defined kernel
objects of a given type are co-located.
Note 1: This capability is needed so that static kernel objects
can be added to the associated object tracing list. (Some kernel
object types are already co-located to permit the kernel to do
other initialzation on statically-defined objects.)
Note 2: A follow-up commit is needed to ensure statically-
defined kernel objects are placed in the sections referenced
in the linker script.
Note 3: The legacy script info remains for now to allow
applications using the microkernel or nanokernel to continue
to build.
Change-Id: I40d831f9e183fb121c950e30fa8298b6d529375b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit:
commit f25ac092b9
"Makefile: Restructure for multilibs"
breaks external HAL library linking, by overriding, in the
the second Makefile pass, the LIB_INCLUDE_DIR variable
set in the first Makefile pass from ext/hal Makefiles.
This breaks use of the CONFIG_CC3200SDK_LIBRARY=y option in
the cc3200 SDK, and also likely the QMSI ext/hal/qmsi/Makefile,
when CONFIG_QMSI_LIBRARY=y is set.
This commit just changes the '=' to "+=".
Jira: ZEP-1163
Change-Id: I1aaaaee57378dcd01ab6f2ed4799281b2337eea2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Allows event objects to pend signals in a cumulative way using
the semaphore in a non-binary way.
Jira: ZEP-928
Change-Id: I3ce8a075ef89309118596ec5781c15d4f3289d34
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Before, the kernel would run the main() function twice; first
as an entry in k_task_list, and then again from _main(). The
_main() invocation would be using a potentially insufficient stack
size.
Now if an MDEF file declares a main() thread, invoke it from
_main(), but honor the desired priority and stack size.
Issue: ZEP-1145
Change-Id: I1abf38fc038e270059589b11d96fae1b3f265208
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Event is such an overloaded and generic term (event logger, *kernel*
event logger, "protocol" events in other subsystems, etc.), that it is
confusing for the name an object. Events are kinda like signals, but not
exactly, so we chose not to name them 'signals' to prevent further
confusion. "Alerts" felt like a good fit, since they are used to "alert"
an application that something of significance should be addressed and
because an "alert handler" can be proactively registered with an alert.
Change-Id: Ibfeb5eaf0e6e62702ac3fec281d17f8a63145fa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This better aligns with the actual functionality of the object.
Change-Id: I70abf54f994e92abd7367251089ea4f735d273fe
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a ccache option to allows enabling the use of ccache for builds
generated by sanitycheck.
Change-Id: Ia997ed29f38a3d2d71ba143456e6fcbc5946d56e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
commit 018b831a36 keeps another elf file in the
outdir which confused the sanitycheck script.
Change-Id: I87a9bcee6afe6526ecc24f1f5d9cf38101247ce2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
build footprint test as part of the main sanitycheck job, we do not run
the script comparing footprint anymore, it will move to somewhere else.
Change-Id: I36d475bfc3d985bf06a872649eae8c19e1a43aa4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This directive is the default, no need to have an ever-expanding
enumeration of these.
Change-Id: Ic5147fe04de033cb7e97fc5cbe45edd1779d1120
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BLE core on the Arduino 101 is an nRF51822 QFAA (256kB flash, 16kB
RAM).
Change-Id: Ia802b3eb634c0cd6775c4059c9569bccd915a578
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This script is part of the CI job and currently is run on all defined boards.
We are limited on resources in the CI infra and this part is taking way too
much time. We now select a group of boards to look at instead of just building
everything.
Change-Id: Ifd634e74426c9cc801032b26ad9a9a94a0e55960
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This fix sanitycheck for apps that specify unified kernel.
Change-Id: I3f1c4d5a566f6833e56bbda097cb497ccdbfbec9
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Python module argparse has a feature to load arguments from a file.
This commit enables such feature on sanitycheck script so files
prefixed by + (plus sign) are loaded during argument parsing stage
and included as arguments to such script.
Jira: ZEP-122
Change-Id: Ibb0a6e8464218a4f58ce4044a5a0860dc5b32480
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Fleshes out the prototype heap memory pool support
to make it fully operational. Noteworthy changes are
listed below:
Tweaks arguments to k_malloc() and k_free() to be more like
malloc() and free(). Similarly, modifies k_free() to take
no action when passed a NULL pointer.
Now stores the complete block descriptor at the start
of any block allocated from the heap memory pool. This
increases memory overhead by 4 bytes per block, but
streamlines the allocation and freeing algorithms. It also
ensures that the routines will work if the block descriptor
internals are changed in the future.
Now allows the heap memory pool to be defined using the
HEAP_MEM_POOL_SIZE configuration option. This will be the
official configuration approach in the unified kernel.
Also allows the heap memory pool to be defined using the
(undocumented) HEAP_SIZE entry in the MDEF. This is provided
for legacy reasons only.
Co-locates memory pool initialization code to keep the line
that causes memory pool initialization to be done during booting
right next to the routine that does the initialization.
Change-Id: Ifea9d88142fb434d4bea38bb1fcc4856a3853d8d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Drop the _m3 from the test name since this can run on M0, M3, M4, etc.
Change-Id: Ia12ece62fc7b42e28f37e191c90c0dead48d40d0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will make it possible for us to optimize the list of tests we run, for
example, we could exclude footprint tests from the main run because those are
run as part of the footprint checks later in the CI job.
Use like this: sanitycheck -e footprint
Change-Id: I4e7a3aa6fac2ba1c9c99b356f08459da97fda777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce an architecture sorting of boards. This is to allow for
easier maintenance going forward as the number of boards grows. It
will be easier for any scripts to know the board/arch mapping without
having to maintain an explicit list of what boards are associated with
which arch. We can also do things like have architecture maintainers
cover reviews and branches for arch/${ARCH} and boards/${ARCH} going
forward.
Change-Id: I02e0a30292b31fad58fb5dfab2682ad1c5a7d5a7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Renames to K_MEM_POOL_DEFINE() for consistency
- Adds alignment parameter to align the pool buffer.
Jira: ZEP-926
Change-Id: I6cf0a1ce45c3a0fc5f0675047d8928659df1e75e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Zephyr uses python 2.7 by default. Phython3 is breaking windows build.
Change-Id: Id0fdbdce89d63f51a0625f5d1f2f45584ecd4023
Signed-off-by: Sonia Leon Bautista <sonia.leon.bautista@intel.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Allows unified kernel to support legacy microkernel applications
that use private tasks.
Also renames the unified kernel macro for defining a thread
to be consistent with the naming used for defining other kernel
objects.
Change-Id: I667d87056138c45c291dd848344e4051bf9fd1ff
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This misfeature can crop up at development time as the linker scripts
are modified, not just as a regression in known tests (c.f. ZEP-955).
So it makes more sense to put it in a check_link_map script inovked
for every build. Remove it from sanitycheck.
Change-Id: I9c2f47a26a3bc03170b895545476350341e91170
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Oops, turns out that we don't require perl in all our build
environments. Rewrite this script (it's tiny) in Python. Exactly the
same logic.
Change-Id: Icbf4b36ef0b18fca94d54fc7fe5e47343c55c669
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Building samples or running sanitycheck script fails with
the following error using python 3:
Using /home/xekarfwtos/projects/zephyr as source for kernel
GEN ./Makefile
CHK include/generated/version.h
HOSTCC scripts/basic/fixdep
HOSTCC scripts/gen_idt/version.o
HOSTCC scripts/gen_idt/gen_idt.o
HOSTLD scripts/gen_idt/gen_idt
HOSTCC scripts/gen_offset_header/gen_offset_header.o
HOSTLD scripts/gen_offset_header/gen_offset_header
CHK misc/generated/configs.c
CHK include/generated/offsets.h
CHK misc/generated/sysgen/prj.mdef
UPD misc/generated/sysgen/prj.mdef
File "/home/xekarfwtos/projects/zephyr/scripts/sysgen", line 687
kernel_main_c_out("K_MSGQ_DEFINE(_k_fifo_obj_%s, %s, %s);\n" %
^
TabError: inconsistent use of tabs and spaces in indentation
This patch fixes the indentation inconsistency allowing building
using python 3.
Change-Id: I51bda9452e7ff97fe9f07544927d76ce981700d1
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
There are demons hiding in binutils with regard to the size of the
data section that needs to be copied in XIP platforms. It's easy to
mess up and get a mismatch between the linker data output and the
runtime addresses. Add a cheap check to discover this early when it
occurs.
Jira: ZEP-955
Change-Id: If1c61fe8712221c6450b5b89f5f8af006b41b3fe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If the -C flag is given to sanitycheck, generate gcov files for unit
tests and render them with lcov.
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Change-Id: Ic25eae6a3cfc2c45595bd6aa235df2c483aaf6ec
This commit allows building tests using the ztest framework without
including Zephyr. This can be used to enable unit testing single
functions, even static ones.
Origin: Original
Change-Id: Ib7e84f4bd9bbbf158b9a19edaf6540f28e47259f
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not every environment has $ZEPHYR_BASE/scripts/ in the PATH, which can
cause conflicts (eg: the test environment doesn't define it to
simplify the build instructions).
Using vercomp as $ZEPHYR_BASE/scripts/vercomp, we remove this
requirement.
Change-Id: I8c390f905907f42d1ba2b4d1378e188705164e13
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Error out when old SDK versions are being used.
Jira: ZEP-584
Change-Id: If3515f38cc75d8a378614ef77d8946ba2d9ab28d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In 1.0 you could set only one callback on the whole gpio controller. It
was impossible for another sub-system to add another callback, without
overwritting an existing one.
Such API has been obsolete for a long time and no one is using it
anymore. Thus removing it entirely.
Change-Id: I6a17fd99373dc6cef1fa2ebb421e992412d5015e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Needs to sort out differences between microkernel and unified MDEF
syntax.
Change-Id: I8f7cb192bdd90c0f9c40593cfbd0aa86b12c7c74
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Cleaner than positional parameters, easier to add new arguments.
Change-Id: I30e85f7b2643775c1006564d18da115599688e88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
On systems with fixed IRQ-to-vector mapping (like Quark D2000),
if multiple drivers tried to use the same IRQ line, gen_idt would
report an IDT vector collision rather than multiple IRQ line collision,
which is much less intuitive.
Move the IRQ line validation to before the vector validation to report
an easier to understand error.
Change-Id: I3930d8df38391e4708db5486e4bd4527d33c4cce
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
QEMU_BIN_PATH is frequently set to pick up qemu binaries from "obvious"
places such as /usr/bin or /usr/local/bin. Neither of these values will
be correct for all users and both directories would typically be found
in the user's PATH. Much better to make QEMU_BIN_PATH optional and picking
up qemu via PATH instead.
Tested with ZEPHYR_GCC_VARIANT={zephyr|xtools}.
Change-Id: I1acfc5b12341c6d330a3e9e90b0ab5bde29e2e4f
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Andrew Boie <andrew.p.boie@intel.com>
