The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit adds the default configuration to the flash_simualtor
to allow unaligned reads.
Disable this option when testing to increase test coverage.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add an explict test for the length of the receive event when
doing incremental receives. This was not tested anywhere in the
normal code path (only implicitly in the abort, which wasn't
exercised on the only current implementation, nrfx). So add an
explicit check for it during the chained reads, so that the
test can catch the case where multiple receive events do not set
the length correctly on events past the first.
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This reverts commit d09b91f5. I was incorrect in my interpretation
of the async API: the number of bytes received is relative
to the previous event, so it does "reset" between calls.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Added a test case with corner case scenario, in which sector closing
operation is interrupted (e. g. due to power-down).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
I2C_STM32_V1 and I2C_STM32_V2 are Kconfig symbols used to
select STM32 I2C driver variant based on I2C IP available on a
given STM32 SoC.
Being SoC dependent, they are automatically selected in soc/
if CONFIG_I2C is set. Then there is no need to define them at board
level, nor for a specific application like this is done in
some sample or test applications. Remove these definitions when
this is the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added a test for testing full round GC on 3-sectors
configuration. In this case all kind off sector can
appeared so this test covers well more numerous
sectors configurations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the timer_api test in order to take under account
fact that timeouts used in the test might not be aligned to tick
boundary.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
As printf() is now used directly instead of printf proxy function,
there's warning-as-error that long long is passed where %lu
expected, so cast it explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Test that k_usleep() allows sleep durations near the limit of what
the platform's tick rate will allow.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add test for a proprietary HCI Vendor-Specific event.
In the test the controller is replaced with a small stub controller,
with limited support of the initialization flow from the host.
After initialization, a HCI prop event callback is registered and an
prop event is triggered and sent to the host. It is then verified that
the registered callback is called.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add LiteX timer driver with bindings for this device.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add an option for building with newlib-nano library.
The newlib-nano library for ARM embedded processors is a part of the
GNU Tools for ARM Embedded Processors.
Add mem_alloc tests with newlib nano.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Reduced Kconfig for counter with nRF TIMER and RTC. Added overlays
for TIMER and RTC configuration in the counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The implementation of the <misc/math_extras.h> functions will use the
portable C code when PORTABLE_MISC_MATH_EXTRAS is defined before
including the header.
Use this feature macro to make sure that the unit test always tests the
portable functions in addition to the ones using builtins for the
current compiler.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Add a <misc/math_extras.h> header file with portable implementations of
a number of commonly used math and bit counting operations that are not
available in the C programming language.
The math_extras functions fall into two groups:
1. Unsigned integer arithmetic with overflow detection. Addition and
multiplication are provides for the u32_t, u64_t, and size_t types.
This commit doesn't include subtraction and division, and there are
no signed operations. These could be added later if there is a need.
2. Bit-counting operations like clz, ctz, and ffs. These are provided
for u32_t and u64_t only. I don't see a need for size_t operations,
but they could be added if needed.
A follow-on commit will add more efficient implementations using
compiler builtins for those compilers that support it.
Another commit will replace other uses of "naked" compiler builtins with
calls to these functions.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
Enable the counter capability in the board and add a .conf file for the
nRF52810 running on the PCA10040 board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added basic tests for the NVS file system. One of the tests covers power
down during the flash write operation.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Define DT_CAN_1_NAME as an empty string if it is not defined.
This is useful for buildtest where no HW is available.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
During the write abort test, a second write is started then quickly
aborted. This means that the number of bytes sent is relative
to that second write. So when comparing it against the number
of bytes received which is NOT reset, the first (completed)
send of five bytes has to be accounted for. The current
nrfx implementations abort quick enough that no bytes are reported
sent, so this wasn't currently being exercised (i.e. the short
circuit of zero bytes sent was taken).
Tested on nrf52840_pca10056.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Some configuration for the boards have to be added into test_adc.c file
so user can test driver with the test cases. Several nucleo boards are
added including F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG.
And also ADC dts and pinmux configuration are added into boards own
pinmux.c and dts file.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
