Documentation updated, added reference to the latest
LPClink2 firmware, default provided firmware may not
work on latest boards (e.g. LPC55xx).
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Like for other choices, it's the prompt that gets displayed within the
parentheses, not the symbol name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Takes a while to figure out what it's there for, so explain what it does
and give an example of a good use for it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current order makes no sense. Move it earlier in the order, so the
catch-all page appears last.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Grammar and formatting improvements, as well as changes requested in
review that weren't made (in particular, the ones recommending using
"pip3 show -f west" to see where west is installed instead of listing
common places that might not be right.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Try to make the language simpler. Introduce each example with a
paragraph that says "To <DO XYZ>" to make them easier to find.
Move the config options to the documentation for that command to make
them easier to find.
Add some more examples for use cases we've gotten questions about.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The previous mcuboot reference didn't make sense - it linked to
itself. Linking to the official website should be more useful.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new command-line and build config option, `pristine`, that the
user can pass to `west build` or set in its configuration file(s) in
order to automatically trigger a pristine build on every build or
whenever west considers it required.
The option can take the following values:
- never: Never run the target
- always: Always run the pristine target before building
- auto: Run the pristine target when required
With `auto`, the pristine target will be run when running
west with an existing build folder containing a build system and:
- Selecting a different board from the one currently in the build system
- Selecting a different application from the one currently in the build
system
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
All docs should have a label at the top that would
permit cross-document linking via :ref:`labelname`.
Update "testing" label that would have conflicted and fix the only
reference to the old "testing" label in development process
documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
tinycrypt documentation wasn't included in the table of contents so add
it into the guides section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit extends existing documentation by providing an example
of how to build Hello World sample application for MCUboot using
west.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a missing reference to how west is used to set ZEPHYR_MODULES in
without-west.rst, augmenting the application development guide a bit
to include this in the list of important variables, cleaning that up a
bit while we are here and adding some more west details.
Add a big fat warning in the getting started guide that using Zephyr
without west is not for the faint of heart.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a note to mention how to get openocd working on windows.
This is taken from stlink-v21.rst file before its reformatting.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This page has been replaced by doc/guides/debugging/probes.rst and
doc/guides/debugging/host-tools.rst
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr boards use a wide range of debug probes and debug host tools that
can often be confusing to users. Introduce a new debugging guide that
documents all the different variations of debug probes and host tools in
one place, including which combinations are valid.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
- add glossary terms for important concepts we have to explain often,
like "west installation"
- add autodoc directives for pulling in west API docs
- add missing documentation for built-in features like west's
configuration, extension commands, etc.
- add missing documentation for "west sign" extension
- describe the manifest in a self-contained way rather than linking to
the relevant pykwalify schema, also adding a missing reference to
"west manifest" in the miscellaneous multi-repo commands list
- move various details regarding history and motivation to why.rst
among other changes to repo-tool.rst, leaving it closer to a "tell
me what I really need to know" style overview
- update planned features
Fixes: #14992
Signed-off-by: Marti Bolivar <marti@foundries.io>
1. The build paragraph was listed with the run option.
But, we need to pass an argument to the native_posix board,
so "ninja run" alone is not good enough.
Plus, it was not coherent with the rest of the text, as
the paragraph intended to tell people how to build.
2. Added "sudo" to the run line, as the user needs extra
permissions to connect to a host BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Move the original documentation in the arduino_101 board to a common
section in the Bluetooth documentation and document the use of `btmon`
in general.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
