The channel direction for a V1 DMA is not allowed to be memory to memory
and there is a check in place for this. However, the check is being
performed on the stream prior to actually configuring the stream. This
results in the check always failing regardless of the channel direction.
The check has been modified to be performed on the incoming
configuration.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
If k_thread_join() was passed with an actual timeout value,
and not K_FOREVER, the blocking thread was not being properly
woken up when the target thread exits. The timeout itself
was never aborted, causing the joining thread to remain
un-scheduled until the timeout expires.
Amend the k_thread_join() test cases to check that the join
completed before the provided timeout period expired.
Fixes: #24744
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
DTLS without peer verification offers no security whatsoever (and is
arguably worse than not using DTLS in the first place).
Change the verification option to require this peer verification. To
use this, it may be necessary to install and use a root certificate.
Signed-off-by: David Brown <david.brown@linaro.org>
Fix I2C bit banging REPEATED START condition function by ensuring both
SDA and SCL are high before generating the REPEATED START.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix I2C bit banging STOP condition function to not create a stray
START condition if SDA is high on entry. Instead, set SDA to LOW
before generating the STOP condition.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This patch prepares the dma and introduces the dmamux on soc series
which supports this feature for memory/periph transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch introduces the periph to/from memory dma transfer
using the dmamux feature and define new values
for dma cells on client side
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The NRF driver doesn't utilize the Kconfig symbol for per instance I2C
so we can remove setting that in the conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The NIOS2 I2C driver does not utilize Kconfig symbols for per instance
I2C anymore so we don't need to set them in the conf files for this
test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32 I2C drivers don't utilize the Kconfig symbols for per
instance I2C anymore so we don't need to set them in the
conf files for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix some wrong assignments for SPI2 and add all other alternative
functions for USART, I2C, SPI and CAN according to STM32F091VC
datasheet, which is at the top end of this series.
https://www.st.com/resource/en/datasheet/stm32f091vc.pdf
Signed-off-by: Martin Jäger <martin@libre.solar>
1. Fix the regular expression used to parse version numbers. This uses
\. and . to parse literal dots; the second one matches any character.
Just use [.] instead in both cases.
2. Don't error out if the installed dtc is too old. It's optional, so
we should just proceed without it. Print a warning instead, and make
it so dts.cmake won't do anything with the installed dtc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Following other drivers, Kconfig based instances are now entirely
removed. In order to do this change, PWM nodes in board DT files have
been given a pwm{N} label so that both:
- DT API checks such as #if DT_HAS_NODE(DT_NODELABEL(pwmN)) can be
used (N being PWM instance number).
- DT references can be written as pwms = <&pwmN x y>; instead of
pwms = <&{/soc/timers@XXXXXXXX/pwm} x y>;
This approach is also used on the Linux Kernel.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Convert the GPIO bit banging I2C controller driver to use devicetree
bindings for configuring instances.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adapt to using new-style device tree macros
for shared memory base address and size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For auto doc generation purpose, get name value of boards' yaml files
in sync with name provided as board name in .rst file
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fixes: #24909
This commit compares against previous search path instead of '/'.
This fixes the infinite loop issue on windows when building a Zephyr
standalone application and not setting ZEPHYR_BASE.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ethan Slattery <ethan@wildlifecomputers.com>
The optimisation in `spi_sam0_fast_txrx()` is broken, loading
two bytes into the `DATA` register in rapid succession will lose
one byte.
This can be observed by running `tests/drivers/spi/spi_loopback`.
The test will get stuck in `spi_sam0_fast_txrx()` forever waiting
for the final byte.
Undo this small optimisation and only load the next byte into the
`DATA` register after the response has been received.
This fixes `tests/drivers/spi/spi_loopback`.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Convert DT_CODE_PARTITION_{OFFSET,SIZE} to use new
DT_REG_ADDR/DT_REG_SIZE macros instead based on
DT_CHOSEN(zephyr_code_partition).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv linker scripts utilize DT_FLASH_BASE_ADDRESS and
DT_FLASH_SIZE, as we want to phase out the old generator we need to
replace these defines with macros from devicetree.h.
We support two flash configurations at this point, either a QSPI flash
like on the hifive board or a SoC flash like on the rv32m1_vega. We
update the linker scripts to check the compat of the zephyr,flash node
and based on if its 'jedec,spi-nor' or 'soc-nv-flash' we determine how
to extract the "flash" base address and size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As we phase out per instance Kconfig symbols convert to utilize
DT_NODELABEL for SPI and I2C instances instead.
Also updated comments to change from FLEXCOMM8 to HSLSPI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Kconfig PWM_[0-3] sybmols don't have any meaning for kinetis family
SoCs. The driver doesn't utilize them and no sample or test code does
either so we can remove setting them in board Kconfig.defconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert DT_RTC_0_NAME to DT_LABEL() references based on which driver is
enabled for the platforms the test is supported on (NRF & STM32).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Kconfig PWM_[0-3] sybmols don't have any meaning for nrf family of
SoCs. The driver doesn't utilize them and no sample or test code does
either so we can remove setting them in board Kconfig.defconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using NODELABEL references to enable driver instances for
PWM0..3. This will allow us to remove per-instance PWM Kconfig symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Topic subscribe() will allow cloud to send messages to
device. There will be a bit of network delay. But mqtt_input
was called only after publish() which will trigger every
10-15 seconds. Which is causing more delay to read published
messages from cloud even though messages are already available
at socket level.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
